Cannot create a third partition of BOOTCAMP
Hi guys, I have tried to install a windows 7 with BOOTCAMP for the last few days, but nothing has worked so far, here is a list of the methods I've tried:
-BOOTCAMP->
-Disk Utility: tried to create a new partition of the data partition with all sorts of formats of partition and the results were all "illegal name" and «it should be 59356 instead of 59352 "»
-Also wrote a check for first aid on a data partition and had this error
-Also tried with an OSX bootable usb key
-As well as "hoped" to be able to decrypt a partition bootable Windows 7
I had 3 partitions before when the older OS X, then I merge/delete (can't really remember) TRAINING camp to the data partition. Now my macbook is running on El Capitan.
Other info: Macbook pro 13 "mid-2012. 500 GB HARD DRIVE. El Capitan OS and 1 parallel windows
Would love to hear any suggestions, thanks a lot!
Versions of Mac OS X Snow Leopard (10.6) have a HD Recovery, which does not allow a shared partition. Your Mac doesn't support SL, so HD recovery has been removed manually or a different order of partitions used.
Can you boot into Safe Mode - try safe mode if your Mac does not commissioning - Apple support - and then start normally and test BC Assistant? Please after the release of the following OS X Terminal commands.
diskutil list
Cs diskutil list
Tags: Windows Software
Similar Questions
-
I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!
Hello
I suggest you view and perform the steps from the following link to install Windows 7.
Installation and reinstallation of Windows 7
Always if you have any problems in installing Windows 7 perform the steps from the following link.
-
Why cannot create the table partitioned successfully?
Why cannot create the table partitioned successfully?SQL> create table hr.gps_log_his (id number, name varchar2(10), time date) tablespace ts_log_his PARTITION BY RANGE (TIME) (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')), PARTITION udp_part09110708 VALUES LESS THAN (TO_DATE('09110709','yymmddhh24')), PARTITION udp_part09110709 VALUES LESS THAN (TO_DATE('09110710','yymmddhh24')), PARTITION udp_part09110710 VALUES LESS THAN (maxvalue) ); (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')), Error on line 7: ORA-14120: DATE columns did not specify the complete partitioning limits.
The detailed error message is as follows:
ORA-14120: incompletely specified partition bound for a DATE column Cause: An attempt was made to use a date expression whose format does not fully (i.e. day, month, and year (including century)) specify a date as a partition bound for a DATE column. The format may have been specified explicitly (using TO_DATE() function) or implicitly (NLS_DATE_FORMAT). Action: Ensure that date format used in a partition bound for a DATE column supports complete specification of a date (i.e. day, month, and year (including century)). If NLS_DATE_FORMAT does not support complete (i.e. including the century) specification of the year, use TO_DATE() (e.g. TO_DATE('01-01-1999', 'MM-DD-YYYY') to fully express the desired date.
Action: Change to_date('09110708','yymmddhh24') to
to_date('2009110708','yyyymmddhh24') -
SanDisk extreme pro 128 GB cannot create the NTFS partition
Hello
I have a sandisk extreme pro 128 GB usb and I try to format it to NTFS in windows and it is impossible.
The only way I success for formatting on my MAC but the NTFS partition is not visible in Windows...
Use NTFS or HFS partition without problems, but on Windows the button does not work on my MAC and can...
Does anyone have a solution for me?PS: I try windows XP, 7 or 8.1 nothing works...
Windows see 2 partitions on my key, but cannot format.I just fix myself... about here was a good idea LoL
So my problem was when I format the key the first time I use my MAC, and by default the MAC use GUID partition to format the key and on Windows, we should use MBR partition.
Then when I format the USB on my MAC using disk utility, on the score of "variants" tab change when to create an NTFS partition MBR (instead of default GUID) partition
After this, format the key and that's it!
Its working fine now, I'm happy with this beautiful, design USB by Sandisk ;-)
-
Cannot create the 2nd partition
OS x 10.8.5
attempted to create a 2nd partition for El Capitan
Started in recovery partition
open disk utility
Click on the (+) sign to create a new partition
partitioning began
says the disk that shrink
crashed - had to force reboot
Started in single-user mode
Run fsck - fy
disc repaired
I tried partitioning again
After a long time, a message says that it na not create partition
of course now I have even more afraid of putting at level m...
is there something wrong with my HARD drive? If she wrote on the site of data?
(OS X 10.8 was a clean install after a failed upgrade)
in any case, is it possible to divide this drive? (clean install of El Cap would be nice but is not worth it because it might be too slow for me - early 2009 iMac)
How much free disk space do you have?
-
Cannot create a new partition of drive c through disk management
Hey... !!! r
am using the windows operating system 8. I try to create the disk partition with disk management option, I find no option to do so. It says "connecting to virtual disk service" and no response. help me how to create readers D E F.Hello
You can create the new partition of the available free space. For example, if you have 1 TB in C and suppose that 500 GB is free, you can do a right click on C in disk management and select reduce the Volume. Make sure that you have selected the new volume lower than the space available for free so enter you anything according to your requirement, but be sure that it is less than 500 GB. In seconds, you have new volume, call it as D or whatever you want. Similarly, you can create E, F and so on.Hope this helps, good luck :) -
Cannot create a new partition, error 0x8007045D windows 7
disk 0 unallocated space, I get an error saying that I can't install windows 7 on my laptop, so I try to make a new partition and it gives me error 088007045d I have no access to other computers or windows, how can I fix?
Hello
1 Windows operating system you are using?
2. What is the full and exact error message?
3. you try to perform a dual-boot on the computer?
Method 1:
I suggest you for the link and check the drive for errors:
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
The article also applies to the Windows Vista operating system.
Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.
Method 2:
See the article and check if the computer responds re required for installing Windows 7.
Windows 7 system requirements
http://Windows.Microsoft.com/en-SG/Windows7/products/system-requirements
If the problem is not resolved, please provide more information to help you best.
-
Cannot create partition during the Windows installation.
Hey
You have a problem with the installation of Windows (10 or 8.1, same problem). I share the part Boot Camp using the tool, but once I'm in the installer that I meet a problem. I format the BOOTCAMP partition scored, but then Windows says that it cannot create a new partition.
Some impressions diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB internal drive 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage GB internal Drive disk1s2 648.9
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft data base 350,5 GB disk1s4
/ dev/disk2 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 764,0 GB disk2
Logical volume on disk0s2, disk1s2
4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9
Fusion unencrypted drive
List of CS
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group C4FDFFD0-7D27-4DCC-9034-2D19E7487DCD
=========================================================
Name: Internal drive
Status: online
Dimensions: 769855381504 B (769,9 GB)
Free space: 180224 B (180.2 KB)
|
+-< physical="" volume="">
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-< physical="" volume="">
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 648866529280 B (648,9 GB)
|
+-> FDD23DD2-C30E-4575-B7B1-50CBCB539D10 family of Logical Volume
----------------------------------------------------------
Encryption type: no
|
+--> Logical Volume 4B58E1CE-F3F4-4E82-974B-019D1DC8A5B9
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 763999944704 B (764,0 GB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
See the TPG: / dev/disk0: mediasize = 121332826112; SectorSize = 512; blocks = 236978176
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 236978175
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 236306352 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
236715992 262144 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
236978136 7
236978143 32 table dry GPT
236978175 1 dry GPT header
Daniels-iMac: ~ danielzandian$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-236978175]
02:00 0 0 0-0 0 0 [0-0] unused
03:00 0 0 0-0 0 0 [0-0] unused
04:00 0 0 0-0 0 0 [0-0] unused
You can also post the output of
sudo TPG - vv - r see the/dev/disk1
sudo fdisk/dev/disk1
What is the year/model of your Mac?
-
Got erro 'We couldn't create a new partition.' installation Win 8 via bootcamp
I was installing Windows 8 pro via bootcamp on an iMac with the new installation of recovery.
It's my fusion drive before installing windows:
However, I got the following error during the installation of Windows 8 pro via Bootcamp, even though I formatted disk 0 Partition 5 Bootcamp:
We could not create a new partition or locate an existing one. For more information, see the Setup logs files.
So I have to quit Setup and go back to Mac OS X and delete the Windows via Bootcamp partition:
Can I ask you why windows cannot be installed on this partition formatted? and how to fix this?
(I just picked up the iMac to a disk fusion problem before installing recently: El Captian is not installed on the part SSD disk fusion after recovery of the internet)
It's frustrating because I installed Windows 8 successfully via Bootcamp when I received the new iMac earlier.
Advice and emergency aid are necessary!
Thank you!
When you say that you have formatted your Windows partition, you format you through installation of Windows (2nd screenshot)? To this screen that displays all partitions, you have chosen the one you want to install to and then click on Format for the Windows install process can format NTFS?
-
Bootcamp does not start after you have created the new partition
Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this?
Thanks in advance.
The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected
-
Repair your startup disk Bootcamp disappearing after you create the new partition
. After some research, I found that it was the way forward to create a separate partition, and so I did another partition.
I didn't know it would affect my Windows partition that I thought it was completely different.
So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.
I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.
(I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)
For reference:
Aerospews-MBP: ~ the marcuslo list $ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh HD 350,7 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Apple_HFS 47.6 Untitled GB disk0s4
5: Microsoft database BOOTCAMP 101,0 GB disk0s5
Aerospews-MBP: ~ list of cs marcuslo$ diskutil
No logical volume group CoreStorage found
Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0
See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060
See the TPG: / dev/disk0: PMBR to sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: / dev/disk0: GPT Sec at sector 977105059
start index size summary
0 1 PMBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC
779577344 262144
779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896 131
977105027 32 table dry GPT
977105059 1 dry GPT header
-
Creates a new partition and now bootcamp is not recognized
Hi, I hope someone can help me. I saw the thread here (repair Boot Camp after having created the new partition), but I had a suite of wire trouble and my setup may be different.
I have an iMac with boot camp and created a new partiiton. Now my windows boot camp does not start. I see it in system preferences > startup in startup option disk, but when I have if I get the message 'no bootable disk '.
If I restart and hold down the option, I see that my mac to start drive and not the windows partition
Here is my system info:
Boot camp is disk0s5
I would appreciate it so no guidance in getting my new bootable Bootcamp.
Please after the release of
sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
-
Z220 SFF - want to dual boot, but you cannot create an additional primary Partition
I want to install a second operating system, but I have more primary Partitions. I want to install Win 8.1 Pro; I have an OEM Win7-Pro that came pre-installed on the original HARD drive and then I rebooted on a SSD drive, I used to replace the original HARD drive.
The SSD has three partitions - all of the primaries, and I don't know if I can get rid of a (or merge with an existing one) in order to create the primary partition, I need for the new OS. My understanding is that Windows only allows three primary Partitions.
The 256 GB SSD has the following primary partitions:
1. System (drive G :) - 2GB in size (NTFS) - I have no idea what it is.) The disc contains two folders (recovery and Remote Programs - two of them empty) and a file of 1 KB called System. But when I check the properties of readers, he says it has 376 MB of space used.
2 HP_Tools (l: car) - 105 MB (FAT32) - the interesting thing is that this player does not actually appear in the computer management/Win7 disk management tool. I see it only when using a third party tool (Partition of AOEMEI).
3. C: drive -l' remaining space (I actually now it split into another D: drive which is where I want to install the new OS, but since the other three disks are primary partitions D: drive appears as a logical partition).
What are the options I have to configure a dual boot on this drive?
Thanks for any help.
After much research I could identify that I could safely get rid of the HP System Tools partition and use the resulting Partition of Primay free for the second operating system.
I've not found an option to load the HP tools on a USB key. But I don't use really anyway, so not a great loss.
Thanks for all the help.
-
Cannot create a partition during the installation of Windows 7
When I want to create a new partition on the unallocated space during the installation of Windows 7 in custom option on that I enter the size of the partition size I wanted and click apply, but nothing happens and cannot install Windows 7, but the same thing can be done by my old Windows XP CD. My computer is Dell Inspirion - 620... When I was clicking on an already partitioned space to install, error message is that there was not much free space in partitioned space was similarly if I formatted the partition of 75 GB and all 75 GB of free space and so on showing the screen.
Try to increase the size of the partition and see what happens.
Windows 7 would probably work on a 75 GB partition, but you will run out of space real fast at that size. A minimum of 120 GB would be better.
Another thing you could try is to simply create a major score for the entire disk, then after you have installed Windows, go to "disk management" and create your other partitions.
Personally, I don't see what good it does to have multiple partitions on the same drive. If the drive fails, all of your partitions went anyway.
-
Two Partitions of BootCamp, cannot start second of two.
I created manually two partitions Bootcamp as each boot fine using BootCamp. The images have already worked as unique BootCamp partitions.
Windows 8.1 is on/dev/disk4s2, Windows 7 x 64 on ./dev/disk4/s3
When I create an automatic configuration of BootCamp, it built a virtual machine with two partitions of/dev/disk4s2 Startup - Windows 8
I have reproduced the configurations, but created new disks:
Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 3 ide BootCamp7
Create the Fusion.app/Contents/Library/vmware-rawdiskCreator applications/VMware\ $ / dev/disk4 2 BootCamp8 ide
I then removed the old files vmdk and pt-vmdk beams, added these and edited the VMX to reflect the name change. The discs appear correctly in the GUI.
The configuration of Windows 8 on slice 2 boots fine, but Windows 7 on unit 3 eventually try to boot from the network with a boot disk not found. The BIOS is configured correctly and sees the drive. Settings is configured to boot from the hard drive.
What Miss me?
-Harald
Just realized it as legacy boot. Only a SINGLE boot partition 'Active' for Windows by drive.
It's bee too long...
Maybe you are looking for
-
iPhone 5 s is always try to send an email
The iPhone is trying to send an email and I can't have an abortion there. Does anyone know how?
-
Internet Explorer take s 10 minutes to load up
When I first turn my computer on the internet explore takes about 10 minutes to load until I can go on the internet
-
SD card is not readable on Tecra 9100 / XP
Hello I don't get my SD card running reader. I can install without no problem SD host controller. But when I insert the card nothimg arrives. The LED on the drive is always out. I have XP SP2 Prof running. Driver Tecra M1 or other Toshiba laptops do
-
I was told yesterday that I should be able to see my latest transactions on my watch in the Apple Watch application on the phone. I was not aware of this and still cannot find them. Adjustable anyone the question directly to me.
-
Why is my music library still looking for missing unknown album everyday now never stops
Why is my music library still looking for missing unknown album everyday now never stops