Fight against exclusion the NAC mac

Similar Questions

• In the NAC MAC address filter list

  How are Faisal Hi, you? I have a question about this list of filters in the unit of the NAC. I want to do those recognized unit of the NAC mac addresses are to be get the network. However if a workstation's mac address is not in the filter list, would it not able to do the network. Is that the NAC has the ability to do? Please let me know. Thank you.

  Richard

  I'm not Faisal, but...

  You want to make additional (such as LDAP or such) or any authentication simply based on the MAC address?  If you want to only via the MAC, you can add them to the list of filters and then either set to 'allow' to allow all traffic, 'role' to put them in a specific role, or "check" to apply the evaluation of posture and then put them in the role.  If no other server authentication is configured, users who were not in the list of filters would not be able to authenticate, and they would be stuck in the authenticated VLAN.

  Thank you

  Lauren

• Ports of the NAC

  Hello Experts,

  Have some questions that came across while doing work of the NAC at one of our subsidiaries. If there is some user ports which are not selected for the profile of the NAC, is it possible (except physical control on the cell phone of the user by allowing all ports & audit) which can be used to track the paths of users without mail for NAC.

  Second, if the user of the NAC port is manually on the vlan user (rather than quarantine or vlan temporary), which is the correct order for that.

  the user on NAC field must be typed manually to vlan user or port profile should try not controlled followed by rebound port & update.

  Apprecite all help, thank you.

  Hello

  See online:

  If there is some user ports which are not selected for the profile of the NAC, is it possible (except physical control on the cell phone of the user by allowing all ports & audit) which can be used to track the paths of users without mail for NAC.

  [Tiago] On the graphical interface of CAM, you can check which controlled uncontrolled ports are. It is the only place where ports can be determined to be managed/no managed.

  Second, if the user of the NAC port is manually on the vlan user (rather than quarantine or vlan temporary), which is the correct order for that.

  the user on NAC field must be typed manually to vlan user or port profile should try not controlled followed by rebound port & update.

  [Tiago] When you perform the configuration of the switch, the switchports can be put on the vlan user or default access vlan. It depends on the port profile settings that you have configured. By default, when a port is managed on the basis, if a client connects, an SNMP trap is sent to the CAM. The CAM check whether the machine is certified or not (check the mac address). If the machine is not certified cam becomes the vlan the authenticated vlan configured on the port profile.

  So, whenever you connect a PC to a switchport, CAM evaluates what is the vlan correct the PC to start and change it accordingly.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Integration of the NAC Profiler - cannot add list of filters on cam

  Hi all

  I have a problem with the Profiler - integration of the NAC for endpoint profiling.

  Here's the situation:

  I have already created the integration based on the steps in the Guide: Setup Cisco NAC Appliance integration. I think that the configuration is correct, because I can do database synchronization between the Profiler and CAM. Here's the log of server profile:

  NAC_SYNC: Task_Queue_Runner commissioning
  NAC_SYNC: Profiler / END of synchronization of the NAC [add 0, upd 0, desc 0, rm 0]
  NAC_SYNC: Profiler / START the synchronization of the NAC
  INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)] is for eth0 MAC

  I have already created a profile of endpoint named "Admin" which is based on the IP address. I also created the NAC events based on endpoint profile 'Admin '.

  The event of the NAC will present 'Admin' profile to a role of the NAC. This event aims to circumvent 'Admin' of the legalisation of the ANC visa so that the "Admin" can connect to the network automatically to a role of the NAC.

  However, when 'Admin' to connect to the network, it still is challanged by NAC. I don't see "Admin" on the filter of the CAM or the list.

  This means that the endpoint profiling is still broken.

  Is there anyone who have experience with this?

  Thanks for the support and comments

  Imad

  Hello

  You cannot add devices manually on the profiler.

  The Profiler has to detect automatically (it is the concept of profiling).

  How this Profiler detects endpoints use the modules of collector.

  Each module has endpoints detection means.

  You will find the description of each collector module here:

  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_intro231.html#wp1062345.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Profiler in the NAC 2.1 to 3.1 upgrade

  Hi guys,.

  I'm setting up a Profiler from the NAC that accompanies 2.1 installed. I upgraded to 3.1, prayed and installed the license without any problems, but I always get this message: "ERROR: [2010-12-08 09:25:01 (main: 668)] valid no key not found [no such file or directory]" "

  The license file exists, and on the interface Web Profiler from the NAC, the State of the license is OK.

  A single line in the license file gives me this information: 'cisco 2.1 INCREMENT CCA-MANAGER countless Permanent '.

  Does anyone know if the license is linked with the version of Profiler?

  The upgrade from 2.1 to 3.1 is allowed or it is necessary to purchase a new license 3.1?

  Best regards

  Hello

  So I guess you spotted the problem here...

  You have a collector's license?

  You need 2 licenses: 1 to the server profile, and one for the collector.

  Basically, the mac address you provide is the same (eth0 ot Server Profiler), but you need a PAK Server Profiler to generate the license Server Profiler (the one you already have) and a PAK for license collector (which is missing).

  You have the collector PAK?

  If Yes, then just go to the license page and submit this PAK and the mac address.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Buy the new mac mini

  I am planing to buy the new mac mini, but I do have a concern about its future use. If I buy the new mac mini today how much time he will press features & future versions of Mac OS X?

  We have no way of answering this question. Suffice it to say, as that new Mac.

• The bluetooth MAC keyboard also works with a PC?

  The bluetooth MAC keyboard also works with a PC?

  Maybe, but there are disadvantages > http://www.tomshardware.com/forum/193169-28-does-apple-wireless-keyboard-work

• monitors compatible for the new mac pro

  The monitors are supported with the new mac pro? My 08 existing monitor will work with the new mac pro?

  Very likely your 2008 will work with the latest Mac pro office.

  Mac, with suitable adopters or cables can support monitors with VGA, DVI, HDMI, mini displayport and displayport

• double job with firefox (i.e.2) icons are on the i - mac toolbar. How can I remove one of these icons?

  Duplicate (i.e.2) icons have appeared on my toolbar of the i - Mac in Firefox. How can I remove one of these icons, please? Delete Firefox!
  Have you tried the method Apple 'recommended', i.e. parts dragging one of these icons and cares for her... then the copy of the icon should disappear. But it does not... .the duplicate icon then a few 'jumps' back on my toolbar at the bottom of the screen.

  Have also tried the key 'command' and then by dragging the icon desired and holding to it... but the same thing happens... compare to disappear, the icon "just jump" back to my toolbar.
  Would be grateful for any help and advice on the above. Thank you in anticipation of your help.

  The only time I see two icons for a Mozilla application in the dock is when I have to restart after installing an extension or a new theme. The additional icon disappears if I restart again. I have an extension that gives me a reset button to use. There is an add-on for Firefox that can give you a reset button, if you care to try this remedy.
  https://addons.Mozilla.org/en-us/Firefox/addon/re-start/

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Retrocopatibility between the latest Mac OS and the old Mac Mini

  Hello

  I m trying to buy a Mac Mini used for my son but I want a machine that can use the latest Mac OS today and at least the next operating system.

  I know that older machines cannot use the operating system more recent (I had this problem with a MacBookPro). Where can I get information on this to avoid buying too much a machine old and limited in this respect?

  Thank you very much for your help.

  Best.

  The Mac mini 2010 aka. Mac mini 4.1 or later supported El Capitan (the current version) and macOS Sierra (next version) of the Mac operating system. While the older models of Mac minis are also supported El Capitan they will not support Sierra.

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• Big screen for the new Mac Pro

  Looking to buy a new Mac Pro.  I like to work while sitting on the couch with my feet supported, but a laptop is not very good for usability, and my neck has had enough.  So, I think trying to upgrade a number of things and to combine the entertainment center with work stations, so I can do both comfortably from my couch.  Ideally I would love it if Apple made a gigantic Retina display, but as they do not have, my current theory includes a 48 "-52" class 4 K HDTV connected to a surround sound via HDMI system, which hangs in turn a blu - Ray player and a Mac Pro via HDMI.

  If someone has done something similar?  I'm assuming that, unlike the old flat screen TV model at work sometimes I mirror my iPad on, a 4 K Pixelize text.  Is this correct?  Or should I still the same problem?  As far as the projectors are a pain, which is the only really good solution here?  Any other question, I would need to know that displays the parameters or incompatibilities if I went with the 4 K HDTV?

  May be useful to take a look at http://www.macrumors.com/guide/4k-5k-displays-buyers-guide-mac/ which covers the 4 K screen with Apple hardware support pretty well.

  You will encounter one of the limits is the HDMI output on the current Mac Pro supports only 4K at 30 Hz not full 60 Hz, which we are used to on most screens. You can watch a form of Thunderbolt to the HDMI connection for display to work properly at 60 Hz.

• Update Firefox lost it of Wharf logo, shows only the generic Mac App logo

  After update to 17.0 for Mac, I lost my Firefox, the dock shows only the generic Mac App logo.

  Try this:

  • Remove the Firefox icon from the dock.
  • Create a new icon by dragging the Firefox application to the dock.
  • [883573/questions/883573]

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)