file > create > edgeProject does not work

Similar Questions

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• "File > open recent" does not work.    Second problem: impossible to drag individual files or folders, from one place to the other.

  I recently installed Lightroom 6 (stand-alone version).  I have two separate issues: firstly the "file > open recent" does not work.  The cottage my last files but when I click on one of them, nothing happens (don't close the existing catalog, nothing new opens).

  Second problem: I can't drag individual files or folders, from one place to another within the section "Files" from the library.  I did this on a regular basis with older versions of LR so I know how it's done - it does everything just not in this new version.

  Thank you

  Chris

  I think that a Mac person will have to answer your question, I do not use Mac computers.

• In the html content of dps, it has a url link to a pdf file. When click on url to load the pdf file, the zoom does not work

  I load html content in an application of dps.

  In the html page, there is a url to a pdf file. When I click on the url, the page loads a pdf file.

  Here's the question: is able to zoom in pdf?

  It's difficult because I can zoom in the first html page, but when I load a pdf file, zoom effect does not work.

  Please let me know if this is a way to make the pdf was able to zoom in.

  Thank you

  Post edited by: monsteryu

  No, this is not possible.

  Neil

• Responsive HTML5 with mergedprojects, creates a hyperlink to a file in the project html parent to a child html file and it does not work! The child has with the parent TOC, but need to tie. Help, please!

  Hi group!

  I have a brilliant parent project that serves as a springboard for other projects. Users click a component of software they want and are redirected to a page with a list of all the documentation available for this component. Click on the name of a document and access - a lot of PDF files. BUT I also wish they were able to tie the online help for the component. After having read up on the link through / between projects, I knew that I needed to create a parent project (for the page intro and links brilliant) and projects for children (for software components).

  THEN

  I created a parent sensitive HTML5 project and the projects of two children. I compiled the parent to create mergedprojects files, and then open the projects children and collected to the appropriate mergedprojects folder. I then created a hyperlink to the file list html documentation in the project parent towards the child file software component html (output folder and start page [which is the same as the default theme]) and the link does not work! The child and its table of contents appears in the parent TOC so topics are here, but I can't link to them. If necessary, I can send screenshots.

  Where I am dorking this place?

  Thanks in advance for your time and help!

  Scottie 'needs help' gear

  What is your relationship like? And how did you create the link?

  A typical reactive merged help is structured as follows:

  index.htm (Master home page)

  mergedProjects

  childName

  index.htm (starting page for child)

  A child from the index.htm page link would look like this:... /... index.htm

  Kind regards

  Willam

• Save to File.vi report does not work when integrated with the executable

  Hello

  When I use the NI_Report.lvclass:New Report.vi and NI_Report.lvclassave report to the File.vi, I can use successfully to create and excel spreadsheet so he was working at the developer.

  However when I build the source into an executable, this no longer works.  (The name of the file is built from the source, so I'm not using a dialog box)

  It can, however, create a .html file, but it does not seem as tidy.  Why is he not creating the Excel file?

  Running developer suite 2009, tried the .exe on Windows 7 and Windows XP with the same effect.

  Thank you

  -

  James

  See the attached zip file, it works for me here, see jpeg images and build the application accordingly and let us know. Did not include exe file, because the file size is too big.

• Desktop icons can be seen on the desktop, folders are not able to be open, content is not visible; File save option does not work!

  Recently, I tried to re - install samsung smarthru mfp program (already installed and working except the scan).

  at the end of the reinstall the Office is empty, desktop wallpaper and all records of icons could not be seen, I wasn't able to use windows Explorer.

  I tried restoring the system, but even after that the message that the restore system was not made completely.

  Now the problems are that (1) folders/icons on the desktop are not displayed on the desktop (I have added Office to taskbar and all office files can be accessed from there.

  (2) the big problem is that folder except option does not work: cannot save Web pages, also the documents/files are not able to be saved after having published a new name.

  (3) new folder names the names of the files are not created.

  I tried norton internet security 2010 full scan, there is no virus.

  kindly help

  Thank you

  Norton will be interefe with system restore.

  Read this info for problems with the system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• File.upload ActionScript does not work on Air SDK for iOS devices

  I try to use the ActionScript File.upload to transfer a file on Air SDK for iOS environment, but the File.upload does not work properly. No event on the file upload handler is executed after File.upload is called, and no exception is caught. When I check the side network traffic server, I found no application http even didn't hit the server after execution of File.upload. The code is below.

  ------------------------------------------------------------------------------------------ -----------------------------------------------------------------------

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:View ' http://ns.Adobe.com/MXML/2009 "xmlns:s ="library://ns.adobe.com/flex/spark"title ="HomeView"> "

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  private var file:File;

  private var dir:File;

  This method is executed to create a file and download it when you press the download button.

  protected void OnUploadButtonPressed(event: MouseEvent): void {}

  trace ("upload button clicked");

  var urlReq:URLRequest = new URLRequest ("http://10.60.99.31/MyPath/fileUploadTest.do");

  urlReq.method = URLRequestMethod.POST;

  var str:String = "this is test";

  var imageBytes:ByteArray = new ByteArray();

  for (var i: int = 0; i < str.length; i ++) {}

  imageBytes.writeByte (str.charCodeAt (i));

  }

  trace ("size =" + imageBytes.length);

  try {}

  dir = File.applicationStorageDirectory

  I also tested in several different directories

  dir = File.createTempDirectory ();

  dir = File.documentsDirectory;

  var today: Date = new Date();

  var filename:String = 'IMG' + now.fullYear + now.month + now.day + now.hours + now.minutes + now.seconds + now.milliseconds + ".txt";

  file = dir.resolvePath (filename);

  var stream: FileStream = new FileStream();

  Stream.Open (file, FileMode.WRITE);

  stream.writeBytes (imageBytes);

  Stream.Close ();

  Review the content of the file to check if the file is written successfully.

  var readStream:FileStream = new FileStream();

  readStream.open (file, FileMode.READ);

  var: string result = readStream.readUTFBytes (readStream.bytesAvailable);

  trace ("rear read result =" + result); The result is shown here as planned.

  file.addEventListener (Event.COMPLETE, uploadComplete);

  file.addEventListener (IOErrorEvent.IO_ERROR, ioError);

  file.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityError);

  file.addEventListener (ErrorEvent.ERROR, someError);

  file.addEventListener (ProgressEvent.PROGRESS, onProgress);

  file.upload (urlReq); This line does not work. No handler is executed. No http request struck the coast server.

  trace ("after file upload test");

  } catch (error) {}

  trace (e);

  }

  }

  Complete Manager

  private function uploadComplete (event: Event): void

  {

  trace ("Upload successful.");

  }

  IOError handler

  private void ioError (error: IOErrorEvent): void

  {

  trace ("Upload failed:"+ error.text ");

  }

  Manager SecurityError

  private void securityError(error:SecurityErrorEvent):void {}

  trace ("security error:" + error.text);

  }

  Another Manager

  private void someError(error:ErrorEvent):void {}

  trace ("an error" + error.text);

  }

  Progress Manager

  private void onProgress(event:ProgressEvent):void {}

  trace ("progressHandler");

  }

  This method is executed to call the URLLoader.load when the delicate touch.

  protected void OnTrickyButtonPressed(event: MouseEvent): void {}

  var urlReq:URLRequest = new URLRequest ("http://200.60.99.31/"); This points to a server not - exist

  urlReq.method = URLRequestMethod.POST;

  urlReq.data = new ByteArray();

  var loader: URLLoader = new URLLoader();

  try {}

  Loader.Load (urlReq); This line is very important in iOS7. He decides if the latter file.upload may work.

  But in iOS8, file.upload does not work even if that line is executed.

  trace ("after urlloader load");

  } catch (error) {}

  trace (e);

  }

  }

  []] >

  < / fx:Script >

  < s:Button = "200" x = "200" width = "400" height = "200" label = "Upload" click = "OnUploadButtonPressed (event)" / > "

  < s:Button = "200" x = "500" width = "400" height = "200" label = "Tricky" click = "OnTrickyButtonPressed (event)" / > "

  < / s:View >

  ------------------------------------------------------------------------------------------ -----------------------------------------------------------------------

  
  

  When it is run on the simulator of the Air, it works very well as expectedand the file is successfully downloaded to the server. But when run on iOS devices (in my case, iPad), as I explained at the beginning, no event on the file upload handler is executed and not the http request has even hit the server. So I think that the problem may come from the client side.

  During my attempt to solve the problem, I found something complicated about this problem on iOS7. In other words, if you call the URLLoader.load method (although the URLLoader.load points to an address non-existed) before calling the File.upload method, the File.upload will work as expected on iOS7. Specifically, when the above OnTrickyButtonPressed method is run before the OnUploadButtonPressedmethod, File.upload will succeed on iOS7. But this only happens on iOS7. On iOS8, File.upload still refuses to work, regardless of knowing if the URLLoader.load is executed before.

  I think in my case, the problem is not the problem of sandbox or a session of Firefox problem described in the two links below, because not even a http request hit the side server. It seems that the Air SDK for iOS comes to fail send the http reason request any.

  http://StackOverflow.com/questions/5967382/Flex-4-FileReference-issues-with-Firefox

  http://StackOverflow.com/questions/351258/how-do-i-make-Flex-file-upload-work-on-Firefox-a nd-safari

  To make my problem clear, I list my environment below:

  • Development environment: Windows7 (64-bit) / Mac os 10.9.4 (tested on both OS platforms.)
  • IDE: Flash Builder 4.7
  • Air SDK: 3.8 / 16.0.0 (after that I have updated to the latest Air SDK 16.0.0, problem persists.)
  • Application server: Tomcat7 + spring

  Finally, I want to mention that download the file using URLLoader.load isn't an option in my case because I want to download large files in the future, which cannot be addressed with the URLLoader.load.

  I struggled with this for days. If I really appreciate it if anyone has an idea about this.

  Thanks in advance.

  Hi KA RYU.

  We have reproduced the issue successfully, our team would work on it.

  -Tushar

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• path of the TestStand 4.2 file report "SpecifyByExpression" does not work

  I noticed that there is a problem in specific terms that has been fixed in 4.2.1

  Is not this problem.

  This is a problem when I select 'Specify report File Path by Expression' specify the expression to use, and then TestStand uses settings appropriate to the option "specific directory.

  I rechecked and it is quite reproducible.

  The phrase is: "\\Reports\\_ [] [] [] .xml'"

  But each time, the report file is generated by using the specific directory setting.

  Is there a solution for this?

  Thanks for any help.

  BTW, the "New Message" page on your site does not work in Opera 10.01 - I can not enter line breaks after the current line in the editor no HTML - line breaks go in front of the current line instead.

  I don't feel well in software TODAY. Entering the path expression of the report in HTML file is not my favorite activity!

  Nick-

  I'm a little confused as to what you mean. You have configured ReportOptions to specify the report by Expression file path? If so, the Locals.ReportOptions.DirectoryType property contains the string "SpecifyByExpression"? The directory 'C:\Documents and Settings\Temp\TestStand\Reports administrator' is where TestStand stores reports where the report should be saved on disk in the directory the Client's sequence file, but the file of the Client's sequence has not yet recorded on the disc.

  I followed the Locals.ReportOptions.DirectoryType and the Locals.ReportFilePath of the process template properties to check if they contain the appropriate strings.

  Determine the path of file report Expression is default SequentialModel.seq, where the expression is evaluated and the Locals.ReportFilePath property is set. You should check to see if this step is actually performed during your run and if the Locals.ReportFilePath property is on the right channel:

  

  

  I hope this helps.

• Port-group on newly created vDS does not work

  Hello

  I have 4 hosts ESXi with version 5.1. The VCenter had the same version 5.1 but the server crashed a few months back, and reinstalled the VCenter engineer new version 5.5 U2. I also have virtual Distributed Switch configured with several groups of ports (VLAN). VLANS are separated by the ID VLAN different. All virtual machines with their VLAN respective can communicate to the breast even VLAN, but also the other VLANs.

  However, I just created a new group of Port with different VLAN ID. Now, the virtual machines in this new VLAN cannot communicate themselves as well as other VLANs. From the virtual machines ping response say "Destination host" inaccessible

  When I move the virtual machines to another VLAN they start working and when I move them back to this new VLAN they do not.

  I also tried assigning VLAN IDS to another VLAN to this group of port newly created, beginning of VMs works again. But the VLAN ID of this group of ports does not work with other groups of Port.

  To me, it seems that the creation of new VLAN ID has some problems. Although I followed the documented process of VMWare.

  I noticed that I have the following versions:

  1 VCenter Server: worm 5.5

  2 Server ESXI host: ver 5.1

  3 vDisbritued Switch: ver 5.0

  Have idea if it's a bug or compatibility problems. Am I missing something?

  Thank you

  I was talking about this doc-

  https://supportforums.Cisco.com/document/115461/configuring-VLANs-UCS-and-VMware

  I hope this help you.

  Thank you

  Hentzien

• CS6 InDesign crashed, cannot restart (lack of fonts, cmap files). Reinstalled - does not work. Help?

  Hello

  my indesign CS6 worked perfectly until yesterday afternoon, when it crashed and wont open again all of a sudden. all it says is "there are fonts missing required system or cmap files. "Reinstall indesign." Done, with the cc cleaner, but it does not work!

  works on windows 7, sp1 - never had any problems.

  everything I can find in other forums on the cs2, which is quite outdated. Why this happens to you? all my other programs of the master collection work very well!

  Okay, after a frustrating weekend, the problem seems to have resolved itself. what I did (for future applications):

  -Downloaded cs6 master collection (since I had my CD not with me)

  -install old desinstallion

  -wipe the system with the cleaning of cc adobe tool everything down

  -Restart

  -install cs6

  -same error. no chance to do anything.

  I then installed a trial version on another computer to render at least my pdf. Then I tried something new: I put the WCPA & fonts (in C:/programs/Common Files/Adobe/PDFL) from the pc to work on a USB key. When I "supported" my PDFL folder on my pc main in a zip (just in case), I gave indesign another try. Then he started upward - since it was the first time a little slower than usual, but it's on track.

• Parameter created but does not work

  OBIEE 1.3.4.1 on Redhat 5.2. I have a BEEP report, I created a list from a query and created a MENU type parameter using the list. It's OK and
  
  When I change a parameter value of the menu box, display BEEP

  Click View Report button to generate report

  I do not see a "view report" button, just click button display the report, refreshed but with the value of the parameter. I expect to act as a filter parameter, but it does not work.
  
  Parameter attributes are:

  Data Type - String
  Default Value - none
  Parameter Type Menu
  Menu Setting - Can select all, All valuePassed

  Thank you.

  Did you include the parameter as a filter in your SQL data model?

  Thank you
  Bipuser

• Play File.vi sound does not work in Windows 7 x 64 Ultimate, LV2009 SP1 x 64

  Hello

  For some reason any "Play Sound File.vi' in LabVIEW 2009 SP1 x 64 won't read my files .wav on Ultimate Windows 7 x 64.  It gives this error:

  LabVIEW:  (Hex 0x12C3) The sound driver or card does not support the desired operation.
  

  The exact same code works (it will play .wav files) with LabVIEW 2009 SP1 on Windows 7 Home Premium 32 x 32 x.

  Here are the results of the test cases I've tried so far:

  Box 1: Dell Precision T3400, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 2: Dell Optiplex 755, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]

  Box 3: Lenovo X100E Netbook, Windows 7 x 32 Home Premium, LabVIEW 2009 SP1 x 32 [works]

  The "Beep.vi", however, works on all three machines.  Audio devices on all three machines work fine when used by other non-LabVIEW applications.

  I also tried several different .wav, including those stored in C:\Windows\Media files.  None of them breed in BT on the zone 1 or zone 2.

  The user account that I use still has privileges administrator on all 3 boxes.

  All this experience?  How can I fix it?  I tried to dig into "Beep.vi" to see if I could reuse all subvis, but Beep.vi is password protected.

  Thank you

  Richard

  I got the wav files to play by calling the PlaySound method contained in C:\Windows\System32\winmm.dll.

  Had to create a library function call and research, PlaySound interface.

  The VI is attached to this message.

• 'Add files to download' does not work for my custom css file...?

  From now on, I have several snippets of CSS stylesheet in the HEAD of various pages tag, but I want to combine them all into a single file "custom.css" and it just a link to specific pages. So I have created "custom.css" in my 'active' projects folder and want to add it then my site by 'Add files to download' under the menu 'File' in MUSE. But I always get the message

  The X:\xxx\xxx\xxx\Assets\custom.css file is not a supported file format

  
  

  Is this possible? I think that used to work some time ago, I had a model that uses custom css files... Why is a css file not supported? Does not make much sense to me...

  I CAN add files jpg or svg to png oder so it doesn't seem to be a problem...?

  Thank you!

  Custom CSS in Muse can be placed at the head of each page.

  It there's no way that Muse can locate the css custom code in an active file and apply it to a specific page.

  Muse export all css on each page and stores it in a separate css file.