Parameter created but does not work

Similar Questions

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You can try both uninstalling and reinstalling as a new user to see if that helps:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If this isn't the case, I recommend you contact Apple for assistance.

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

• When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Tax Turbo installed but does not work on Windows Vista

  Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.

  Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down".  Any help?

  Have you ever successfully run this program on your machine?  So the system restore helps you, if if he was running very recently.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Which edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista?  64-bit versions may not be compatible at all?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

  The program will run in Mode safe?

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Problems with the launch of other programs via shortcuts on your desktop?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Adobe Flash is installed but does not work.

  Shows that Adobe Flash is installed but does not work.  whenever I try to watch a video, it says I need to install adobe flash

  original title: adobe flash

  Why do you send the original to a download of the Adobe Reader software, poster when their question Abobe Flash Player?

  The current version of Adobe Flash Player is 11.2.202.235

  http://get.Adobe.com/flashplayer/

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. I do

  I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. What do I need to reinstall Photoshop in English?

  Also if you wish, you can take back to the top of Presets, plugins... before uninstalling.

• Filters Photoshop CS6 Gallery is visible (not grayed out) but does not work.

  Filters Photoshop CS6 is visible (not grayed out) but does not work.

  I opened in 8-bit RGB jpeg.

  I can use the options of fluidity and blur, but nothing in the Gallery of filters (for example cutting).

  I am running on a MBPro CS6, recently restarted, 16 G of RAM, OSX 10.11.1

  I get no effect for smart objects or rasterized jpegs.

  You will notice the cut filter is selected, but has no effect on the picture.  There is no error message.

  It looks like I could use the filters a month ago.

  Thank you.

  Jeff

  

  The preview is enabled.

  Click just to the left of the opening.

  

• I use CS4. Can I open files CS6? I get 'not available on your system plug-ins' messages and I would like to open anyway, but does not work by clicking OK.

  I use CS4. Can I open files CS6? I get 'not available on your system plug-ins' messages and I would like to open anyway, but does not work by clicking OK.

  InDesign CS4 can open the .indd files, .indt and .inx from earlier versions, but not from later. It should, however, be able to open files saved or exported to more recent versions, .idml being understood than non support for features will be lost, text will likely reflow due to differences in the engines of texts between versions and more the gap between versions more likely, there must be significant differences from the original. You need to be sure that CS4 is at version 7.0.6 read the .idml.

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Port-group on newly created vDS does not work

  Hello

  I have 4 hosts ESXi with version 5.1. The VCenter had the same version 5.1 but the server crashed a few months back, and reinstalled the VCenter engineer new version 5.5 U2. I also have virtual Distributed Switch configured with several groups of ports (VLAN). VLANS are separated by the ID VLAN different. All virtual machines with their VLAN respective can communicate to the breast even VLAN, but also the other VLANs.

  However, I just created a new group of Port with different VLAN ID. Now, the virtual machines in this new VLAN cannot communicate themselves as well as other VLANs. From the virtual machines ping response say "Destination host" inaccessible

  When I move the virtual machines to another VLAN they start working and when I move them back to this new VLAN they do not.

  I also tried assigning VLAN IDS to another VLAN to this group of port newly created, beginning of VMs works again. But the VLAN ID of this group of ports does not work with other groups of Port.

  To me, it seems that the creation of new VLAN ID has some problems. Although I followed the documented process of VMWare.

  I noticed that I have the following versions:

  1 VCenter Server: worm 5.5

  2 Server ESXI host: ver 5.1

  3 vDisbritued Switch: ver 5.0

  Have idea if it's a bug or compatibility problems. Am I missing something?

  Thank you

  I was talking about this doc-

  https://supportforums.Cisco.com/document/115461/configuring-VLANs-UCS-and-VMware

  I hope this help you.

  Thank you

  Hentzien

• Competitor Manager starts but does not work

  Hi all

  Platform: AIX 5.3

  Oracle EBS 11.5.9

  9i DB

  
  I have sought a response on this forum and blogs, but he could not understand how to solve this problem.

  Level APPS, made a backup of tar and restored on another machine (everything is same) but on the new concurrent machine manager does not work but everything else works well.

  When you start the application startup script:

  applprod@cloapp:/oraapp/prodcomn/Admin/scripts/PROD_cloapp > applications/applications <

  You run adcmctl.sh version 115.19

  Responsible for simultaneous departure PROD...

  Departure PROD_0323@PROD internal competitor Manager

  Default printer is noprint

  adcmctl.sh: exit with status 0

  applprod@cloapp:/oraapp/prodcomn/Admin/scripts/PROD_cloapp >

  If I click on the internal log manager, I get the following message:

  There is no log file for the process xxxxx. The concurrent Manager may have encountered an error attempting to create the log file

  Database alert log watch

  Commissioning ORACLE RDBMS Version: 9.2.0.3.0.

  Parameters of the system with default values:

  _trace_files_public = TRUE

  process = 800

  sessions = 885

  TIMED_STATISTICS = TRUE

  shared_pool_size = 301989888

  SHARED_POOL_RESERVED_SIZE = 30000000

  _shared_pool_reserved_min_alloc = 4100

  JAVA_POOL_SIZE = 67108864

  enqueue_resources = 32000

  nls_language = American

  nls_territory = America

  nls_sort = binary

  NLS_DATE_FORMAT = DD-MON-RR

  nls_numeric_characters =.,.

  nls_comp = binary

  nls_length_semantics = BYTE

  control_files = oradata/proddata/cntrl01.dbf, oradata2/data/cntrl02.dbf, /oradata/proddata/cntrl03.dbf

  db_block_checksum = TRUE

  DB_BLOCK_SIZE = 8192

  db_cache_size = 167772160

  compatible = 9.2.0

  log_buffer = 10485760

  log_checkpoint_interval = 100000

  log_checkpoint_timeout = 1200

  DB_FILES = 512

  db_file_multiblock_read_count = 8

  log_checkpoints_to_alert = TRUE

  dml_locks = 10000

  row_locking = always

  UNDO_MANAGEMENT = AUTO

  undo_tablespace = APPS_UNDOTS1

  undo_suppress_errors = FALSE

  UNDO_RETENTION = 1800

  db_block_checking = FALSE

  max_enabled_roles = 100

  O7_DICTIONARY_ACCESSIBILITY = TRUE

  session_cached_cursors = 200

  UTL_FILE_DIR = / usr/tmp, /oratech/proddb/9.2.0/appsutil/outbound/PROD_clodb

  JOB_QUEUE_PROCESSES = 2

  _system_trig_enabled = TRUE

  CURSOR_SHARING = TRUE

  parallel_min_servers = 0

  PARALLEL_MAX_SERVERS = 8

  background_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/bdump

  user_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/udump

  max_dump_file_size = 20480

  core_dump_dest = /oratech/proddb/9.2.0/admin/PROD_clodb/cdump

  optimizer_features_enable = 9.2.0

  db_name = PROD

  open_cursors = 600

  iFile = /oratech/proddb/9.2.0/dbs/PROD_clodb_ifile.ora

  SQL_Trace = FALSE

  _sort_elimination_cost_ratio = 5

  _b_tree_bitmap_plans = FALSE

  _fast_full_scan_enabled = FALSE

  optimizer_max_permutations = 2000

  query_rewrite_enabled = true

  _index_join_enabled = FALSE

  _sqlexec_progression_cost = 2147483647

  _like_with_bind_as_equality = TRUE

  pga_aggregate_target = 1073741824

  workarea_size_policy = AUTO

  aq_tm_processes = 1

  olap_page_pool_size = 4194304

  PMON started with pid = 2

  DBW0 started with pid = 3

  LGWR started with pid = 4

  CKPT started with pid = 5

  SMON started with pid = 6

  RECCE has started with pid = 7

  CJQ0 started with pid = 8

  QMN0 started with pid = 9

  Sun Mar 23 18:10:09 2014

  ALTER DATABASE MOUNT

  Sun Mar 23 18:10:13 2014

  Mount of redo thread 1, with mount id 254776577.

  Sun Mar 23 18:10:13 2014

  Database mounted in exclusive Mode.

  Completed: ALTER DATABASE MOUNT

  Sun Mar 23 18:10:13 2014

  ALTER DATABASE OPEN

  Sun Mar 23 18:10:15 2014

  Thread 1 is open to the sequence of journal 9194

  Currently Journal # 2 seq # 9194 mem # 0: /oradata/proddata/log02a.dbf

  Currently Journal # 2 seq # 9194 mem # 1: /orada

  Where should I start in order to solve this problem.

  I don't know why are you fndsm missing entry tns. AutoConfig should have created the tnsnames.ora with this entry.

  Assuming that the architecture you have is

  clodb - only db level

  cloapp - applications (cm, forms, apache)

  1. check if you have the correct entry for FNDSM_CLOAPP_PROD tns in tnsnames.ora on the application tier

  2. make sure that apps listener is running

  If it does not, the cleaner way than it would be to:

  1. stop all application services

  2. run exec fnd_conc_clone.setup_clean (); only applications

  3. run autoconfig on dbtier

  4. run autoconfig on level apps

  Check fnd_nodes, you should have entries for the nodes and the check tnsnames.ora, should have entered correct tns.

  5 start services.

  Thank you

  Shakti