file placedItem (re) failure of the implementation in Javascript

Similar Questions

• El Capitan iCloud drive failure complete the transfer of files on disc from Macbook to iCloud drive

  Product

  MacBook Air. 120 GB with 15 GB of free disk space.

  Connected to the internet via WIFI from Apple Timecapsule, here through to VDSL 40 MB/s in download, 10 MB/s in upload.

  Operating system

  El Capitan 10.11.06

  Describe the problem and include details on what seems to make it.

  The Macbook was working a little slowly. It seemed a good idea to transfer files to the player to iCloud from various places on the Macbook. I created a folder, XXX, within the iCloud drive. I did drag elements of 2200 (displaced), approximately 1.8 GB total for the XXX folder. The files successfully on 15 minutes, no files in the source folder. Disk utility showed that I had lost free disk space, to about 14 GB on the Macbook.

  Use the Finder to open the iCloud drive showed two points of interest:

  • Circle of pie next to iCloud Drive. The pie chart had a white game, with most of the gray.
  • At the bottom of the window in the Finder to iCloud drive notification: 8 items, 15 GB available, download 2 235 elements (1.84 GB 1.94 GB).

  Since the transition to iCloud Drive 18 hours it is, nothing good is felt. Notification of message like above remain unchanged.

  Accessing the iCloud drive through another computer, using iCloud.com on behalf of the Watch:

  • 79 items in the folder XXX (when there should be a more another 2000 points)
  • No element contain subfolders of the folder XXX
  • 4.54 GB available

  Already tried troubleshooting steps

  • Rebooted computer MacBook twice
  • Patiently waited all night for computer complete the download sync on iDrive
  • Use disk utility to repair disk

  No temporary miracle identified.

  Related full exploration of this issue is here (thanks!). The link includes several possible solutions.

  iCloud Drive no local sync

  The main solution, apparently, is "Call Apple Support". I note that there are several recent complaints in the same direction. Maybe something changed with the implementation of iCloud Drive in August 2016?

• I had received a record of failure of a file error message and when I tried to follow measures to correct by adjustment files he told me that the system does not find the files

  I got the error message, shortly after I upgraded to service pack 2 windows xp with service pack 3.  When I try to start in safe mode or in an earlier era, the computer stops at the 32\drivers\mup.sys system.  Then it goes to the blue screen which gives me the error message of failure of a registry file and begins to clear the physical memory on the disk.

  And what happens when you try to start in Normal Mode?

  Have a HP or Compaq PC? If Yes, read on:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284
  If not, let us know. Also, have you tried install SP3 with an antivirus running on board? (That's a no-no!)

• How implement storage files and save emails in the application Mail in Windows 8

  Know Windows Live Mail which allows me to create storage locations and drag emails to them for future use, but cannot see how to proceed with the application Mail in Windows 8.

  I thought about it.  I decided to include 4 emails from different vendors in my Mail in Windows 8 application and realized that they all had different folder list.  Each folder in the application list was exactly the same as it has been implemented in my original email with the vendor account. for example, gmail, Hotmail, etc.

  I connected to each of my email on the suppliers Web site accounts and created new folders here.  When I went back to the application of Mail Windows 8 all my new files now posted.

  The App is just to import what you have already set up.  You cannot create folders in the application itself.

• Transaction is written to the log file and it is not written to undo tablespace. During a failure of the system how oracle rolls back the transaction.

  Hi all

  My question is:

  Transaction is written to the log file and it is not written to undo tablespace.

  During a failure of the system how oracle rolls back the transaction.

  I have already provided the answer, you ignored if well (you seem to only read the responses by people of your country).

  Redo log is always written * first * before * writing to the data block (redo log writing is much more aggressive). So it DOESN 'T MATTER if you lose these scriptures of rollback segment.

  Valuation: rear roller followed by roll forward, using redo log files and/or archive redo log files.

  Sybrand Bakker

  Senior Oracle DBA

• Failure of the Session of YES YES-10208: cannot find the specified product files

  Hi all
  
  I get an error when I try to install 11.1.1.6 on Windows OBIEE. I get the following error message when I click on install and once 13% installation is complete:
  
  "Enter the disk with Oracle Fusion Middleware Business Intelligence 11g and number 4 disc label or access files containing location for the disk, then press OK"
  
  Failed installation. Failure of the Session of YES YES-10208: could not find the files of the product specified by the disk labeled "Oracle Fusion Middleware Business Intelligence 11 g. Impossible to continue with the installation, check the value in the variable FROM_CD_LABEL corresponds to the value in the file "disk.label" or please check if the disk is accessible.
  
  I tried pointing to the folder where all of my extracted files are present, but I still get the error.
  
  I have all my extracted files in a folder on the E drive, and RCU file on drive C as my OS is on the C drive.
  
  Please let me know if I should create a new folder for the extracted files.
  
  
  Thanks in advance!

  Hello

  You can check if links below help to solve your problem.

  OBIEE 11 g installation disc number 5 required
  http://dannywil.blogspot.in/2011/04/OBIEE-installation-steps.html

  Thank you

• Failure of the LKM FILE to Oracle (SQLLDR)

  HI -.
  I'm trying to load a file into an Oracle using the LKM FILE to Oracle (SQLLDR) table. I don't have any changes to the default values in the LKM. But the process fails to call sqlldr ss_o step.
  
  This is the message of control file
  
  OPTIONS)
  SKIP = 1,
  ERRORS = 0,
  DIRECT = FALSE
  )
  DOWNLOAD THE DATA
  INFILE 'D:\ODI_META\METAFILES/test.txt' ' X "0D0A" str
  BADFILE "D:\ODI_META\METAFILES/test_name.bad."
  DISCARDFILE 'D:\ODI_META\METAFILES/test_name.dsc '.
  DISCARDMAX 1
  IN THE ODI_STAGING TABLE. "" C$ _0test_name ".
  
  FIELDS TERMINATED BY X 7 IT
  
  TRAILING NULLCOLS
  (
  C1_PERIODDATE,
  C2_LES
  )
  
  
  File error message "SQL * Loader-101: invalid argument for the name of user and password.
  
  Someone knows what's the problem?
  
  -app

  Hello

  Read the requirement of KM... it will be mentioned that you need a customer installed Oracle Tnsnames.ora file must be configured, source file must be accessible to all mapping needs to run on the staging agent ODI etc.

  Check each requirement of the KM and to implement the same.

  Thank you
  Fati

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• ORA-27369: failure of the EXECUTABLE work with exit code: no such file or dir

  Hi all
  
  I'm new with DBMS_SCHEDULER and my need is to create a job, without program and schedule, I can call in an app of the Apex.
  This work carried a window * by cmd.exe .bat file
  I have test the .bat with doubleclick and it works.
  I have test the window run with the string

  c:\windows\system32\cmd.exe/c C:/mycompletepath/myfilename.bat > nul

  and it works.
  
  I have run the following

  execute DBMS_SCHEDULER.create_job (
                 job_name=>'EIM_JOB',
                 job_type=>'EXECUTABLE',
                 job_action=>'c:\windows\system32\cmd.exe',
                 number_of_arguments=>1,
                 auto_drop=>FALSE,
                 enabled=>FALSE,
                 comments=>'Job Lancio EIM'
            );

  and the task is created.
  
  I run this

  execute DBMS_SCHEDULER.set_job_argument_value('EIM_JOB',1,' /c C:/mycompletepath/myfilename.bat > nul');
  execute DBMS_SCHEDULER.enable('EIM_JOB');
  execute DBMS_SCHEDULER.PURGE_LOG(job_name=>'EIM_JOB');
  execute DBMS_SCHEDULER.run_job('EIM_JOB');

  but error ORA-27369: jobs of type EXECUTABLE failed with exit code: no such file or directory is triggered
  
  The argument is uge and read about it here https://forums.oracle.com/forums/thread.jspa?threadID=701740 here https://forums.oracle.com/forums/thread.jspa?threadID=555102 and here http://www.oracle-base.com/articles/11g/SchedulerEnhancements11gR1.php_ I guess that my problem is quite on the credentials , but I need help or advice to clearly identify, check and solve the problem.
  
  Any kind of help will be appreciated.
  Thank you
  
  Alex

  Hi Alessandro,.

  Other registered Oracle services?

  This service is automatically created during a successful installation of the database under Windows. If she is not there, something may have gone wrong during the installation.

  Thank you
  Ravi.

• How to be notified of the ftping file schema validation failure in XMLDB

  Hi all
  
  Oracle 10.2.0.4
  
  We used RegisterSchema to register for an XSD. And we are ftp'ing the xml files in the database using port 2100 to load in the xmltype table.
  
  How should we deal with the case where the XML file fails validation schema for the FTP "put" of the process, as with an enumeration error? We want to save the error and warn users that the file failed to load due to an error in xml validation.
  
  Is there a log somewhere in Oracle who writes the error, as in the listener.log?
  Can we have the FTP process will return the error ORA-31038 that gets triggered when a xml schema validation error occurs?
  
  Thank you very much
  
  Troy

  This error is caught during the validation of light since we need to encode the value of the enumeration before we store. Therefore, it happens before any insert triggers fire. The only solution for this is 11.1.x using the repository event model.

• Only VC currently - planning the implementation of SRM

  Hi all, I read the page sup-100 (planned for a plu guide?), Administrator's Guide as well as the of the evaluator and guide "Notice."

  I did not see anything in the official docs/pdf files that address the apparently common scenario in which a given customer is responsible for the implementation of SRM, and said customer has always (so far) an implementation of simple-VirtualCenter in which there are 2 or more virtual datacenters (and their hosts/clusters) extending over 2 or more physical sites/locations.  What IS very clear documentation, that is, before the SRM being installed, the customer must have the following in place: 2 VirtualCenters (and their databases), 2 license servers (and their respective records of LIC) and 2 servers RS (and their data).

  So I draw some negative findings/conclusions and would appreciate confirmation because it is uncharted territory for me and we have been a store VC 'single' since the time of ESX 2.5:

  1. I need to 'split' my world to a single VirtualCenter that handles all my guests/clusters and all my virtual machines.

  2. I need to divide my license file in 2 low-income instead of the unique ICA is now.  (I already bought all the necessary licenses, I will need, including a 2nd license VC, and SRM licenses for each cpu on the host computers that will be 'protected')

  3. I inform my fellow admins (I'm in charge of welfare of ESX in my company) that hosts 'Site A' and the vm and the clusters will be managed by pointing to the current instance of the VC, whereas 'Site B' vm and clusters, etc., that were PREVIOUSLY managed on Site is now managed the new instance 'Site B' VC...

  How go on this redistribution/splitting of the implementations of VC and the files license and databases is entirely mine.  Is that hard to understand, but it needs to be done, regardless, before the installation of SRM.  Site A VC will handle everything in Site A and VC of the Site B will handle everything in period of Site b...

  Thank you all... and if there is anything in any docs related to the foregoing (in which the user Bob must transition from a simple VC 2 VCs), sorry I missed it-please advise.

  Your assumptions are correct, you will need to have two virtual centres as well as two licenses, servers, databases, VC and SRM SRM and don't forget 2 without for the storages of replicated data. If you think about it, it makes sense, since the purpose of SRM is DR having 2 of all eliominates a single point of failure.  Now regarding how to split the VC isngle two - I know not all guide, but it's going to be a manual process to remove guests from the VC original he and adding them to the new VC in the Dr site

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I select save files, but when I close the browser and open it again, he was always ask me where to save files.

  I select save files, but when I close the browser and open it again, he was always ask me where to save files. Whenever I closed and re-opened my browser it goes back to ask me where to save files.
  Help, please

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

  If you like Advanced SystemCare software that could restore some files from older versions to protect files against the changes and then check their settings or uninstall this software.

• How we prevent save as alwways .csv file adding .txt file name if I choose the action "open with?"

  My download of csv ASP page is to call:

  Response.Clear
  Response.AddHeader "content-disposition", "attachment; filename = filename.csv ".
  Response.ContentType = "Content-Type: text/csv; "charset = utf - 8"

  When I click on the link to this ASP page, appears the dialog 'Opening filename.csv' Firefox:

  filename.csv
  which is a: Text Document

  If I choose 'Open with < any Application name >' the file is always opened by the application with a .txt appended to the name of the file, which, in this case, my spreadsheet software prevents opening correctly.

  (a) how can I prevent the .txt is added the filename if the OpenWith is used?

  (b) is there a way to add a CSV type to the tools-> Options Applications Content Type list to avoid the message "which is a: Text Document"?

  This behavior does not occur in Chrome, Opera, Safari or IE.

  It was a failure of the server, not Firefox.

  ASP should have been:

  Response.ContentType = text/csv"; "charset = utf - 8"

  Fixed!

  Thank you

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• Failure of the airport Time Capsule?

  I have a Time Capsule from Apple Airport – 2 TB (ME177LL/A). Today, I was unable to access the drive in the finder for the first time. The airport icon does not appear in airport utility. More than a month, no real change in my machine, no new installed apps, I've upgraded to El Capitan. I did some research on Google and found the only real option for me (after a power power off to the airport and my machine) is to reset the router to factory settings which I seem to have done. In addition to killing the wifi (which was still working before reboot), the Airport now appears under the button "other Wi - Fi devices (1). But whenever I select which and it attempts to connect (so I can probably do a manual installation) it fails and merely says that an unexpected error has occurred. I don't know if I lost all my files on the disk, since this seems to be a failure any which allows to treat the router itself. He was still working as a bridge providing internet and Wi - Fi before the reset, now it only provides internet for everything that it is hooked up via ethernet.

  I had some of my gripes with this product over the years, but the lack of diagnostic information is now slightly irritating. Is there something else for me to do a short delivery to another zero?

  First of all... no files will be lost on the hard drive... for this, TC would fail to start or have a disk failure error...

  Your questions are totally El Capo... and pretty typical.

  Why should he choose now occur instead of a month ago... done installing part of the pleasure of the wireless network adapter... It's frightfully little reliable.

  I want you to do it again... Yes I know.. Sorry...

  Disconnect the TC of the network and plug in ethernet on the computer... However leave the radio on... Apple depends on increasingly less reliable network strategy.

  Do a complete factory reset.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  N.b.: any of your files on the hard disk of the TC are deleted... This erases just the settings of the router of the TC.

  Go in the wireless and ethernet on the computer and make sure you have IPv6 well positioned to post a local link only. for example...

  

  It is set to automatic might be the reason why you have problems... one day he autoed to bad settings... Auto is a plan for a disaster.

  Now, try and open the configuration of TC in airport utility... No luck... do it manually...

  Accept this self... is always a bad idea... so here go us.

  1. click on file and set up the other.

  

  2. Enter the IP... always 10.0.1.1 after a reset. No password necessary yet.

  

  3. now you can see all parts of the installation... you will go to each tab to make configuration.

  

  4. in the first place is the Base Station... and change the name... in short, no spaces and highly recommended pure alphanumeric characters.

  Ditto for passwords. Internet will be DHCP for most people having nothing else... then wireless

  

  Then the network... Choose what you want yourself... you are now in control.

  For most people, they will be set to DHCP and NAT or Off (Bridge Mode)

  

  5. Once you have finished making changes... update allows to configure them for the TC... and wait until it restarts...

  If all is good it will come back on the main use.

  

  If it still errors just click on TC icon and go back into the setup and fix anything there.

  Any step fails to tell me that that...

  You may need to switch to ethernet, if you have any problems, if.

  In airport utility now ethernet is under other devices Wi - Fi... that makes no sense at all. Ethernet will only appear when it is connected and working.