Windows Update will apply to the application server

Similar Questions

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• Windows Update will fail with the error: error code 80072F78

  Original title: windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Hello
   
  1. who is the software antivirus installed on the computer?
  2 did you have any software or changes to the material on the computer before this problem?
   
  Method 1:
   
  See the steps in the following links.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  If the problem persists, see the steps from the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997
   
  Registry warning
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
   
  Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
   
  Hope the information is useful.

• Windows Update will automatically restart the system

  After I install updates to Windows 7, I have to restart my system. The computer is done automatically. How permanently disable this? I don't like that gives Windows me a "choice" to postpone the restart - if I'm away from the machine, then I have no way to stop that and I lost all the data that I had and all the screens I look at one. I'm an adult; I can make my own choices on when I need to restart. Now I get more than 16 hours of work on a project because Microsoft thought that I was a child and could not take decisions for me.

  How to disable auto restart continuously after updates?

  To update manually instead (this means that you need to remember to update your computer when it is convenient to you - also know that you can not be protected against the latest security threats until you update)-
  http://Windows.Microsoft.com/en-AU/Windows7/turn-automatic-updating-on-or-off TaurArian [MVP] 2005-2010 - Update Services

• Windows Update will not install the 2587968 for Outlook junk e-mail filter. I get an error 57 a code.

  Because I do not use Outlook, can I just hide this update. If so, how? My computer has Windows Vista and Office 2003. Thank you

  Because I do not use Outlook, can I just hide this update. If so, how? My computer has Windows Vista and Office 2003. Thank you

  In the update of Vista, to hide an update...

  1. click on view available updates
  2. right click on the update you want to hide
  3. click on hide the update
  4. confirm the UAC if necessary

  If you want to try to install the KB2587968 update, try leaving the office 2003 CD in the installation drive or do a repair installation of Office 2003.

• Windows Update will not download anything, the code error code 80070641 and 641

  When I try to download things it says Update window won't I don't really know what to do and my windows update will not install the things he asked me of! Help, please

  Hello!

  It's what has helped us to
  This error code occurs when the Windows Installer is damaged
  Try this:

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  I also had iolo which weaken my Windows Installer and I had to uninstall it.

  Hope this helps

  Microsoft KB article:

  http://support.Microsoft.com/kb/2642495

  Please come back if you need more help

  Thank you

  Makoi

• Windows Update will not end. ?

  Windows Update will not allow the installation of the updates.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  what version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  what application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install? (Number of KB)

  What error do you get everything when trying to install updates?

  A general solution, *IF* is no malware problem, would be to reset the update components:

  Access the KB article via Internet Explorer next (only) & run it in DEFAULT and AGGRESSIVE modes difficulty.

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058>

  Although this page States that this article does not apply to Windows 7, it does.

  The most effective way to use the Fixit above is to download, * except *, configure the system to boot, then run MicrosoftFixit 50202.msi and all first choose the default mode. Turn it back on.

  See if the system can update now. If no joy, run it again with the system connected to the internet, in aggressive mode. Turn it back on.

  See if the system can update now.

  Cancel the clean boot procedure, and then see if he can search for updates in Windows normal mode.

  How to configure Windows XP to start in a State of boot minimumhttp://support.microsoft.com/kb/310353>

  How to troubleshoot a problem by performing a clean boot in WindowsVista/Windows 7

  http://support.Microsoft.com/kb/971058>

  BTW, when a short "Windows Update" fix this "utility on this page, how to reset the Windows Update components?, the history of update file is deleted." This is why you don't see the update history even if the system can connect to Windows Update. Open the ReportingEvents.log located in Windows\Software Distribution to examine the history of update.

• After the SP2 on Vista 64 update, Windows Update will reflect no updates in the history of the update successfully, only to fail.

  I'm running Vista 64 on a laptop HP Touchsmart.  I've recently updated to SP2.  It took me 3 tries to get to SP2.  I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered.  Now, Windows Update will install the updates but it reflects not in the update history.  It shows then available updates again and when I try to install the second time, they do not.  Failure is displayed in the update history.  I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed.  I completely disabled Macafee but did not help.  Any suggestions?

  I'm running Vista 64 on a laptop HP Touchsmart.  I've recently updated to SP2.  It took me 3 tries to get to SP2.  I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered.  Now, Windows Update will install the updates but it reflects not in the update history.  It shows then available updates again and when I try to install the second time, they do not.  Failure is displayed in the update history.  I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed.  I completely disabled Macafee but did not help.  Any suggestions?

  Suggest you clean boot Vista x 64 . Perform step 1 .
  Once in the clean boot state, run the Fixit here in clicking on the Internet Explorer shortcut and choosing "Run as Administrator" . Enter a password, if one is used, or click on the button continue. :
  How to reset the Windows Update components?

  Then click the Fixit button, click run in the file download dialog box, and follow the steps described in the fix it Wizard. and choose the default option. Restart the system after the tool runs and check if updates are available, and if they install automatically.
  Since it's Patch Tuesday, updates should be available for the system soon, if not today.
  IF no updates installed automatically in the coming days, rerun the Fixit but aggressive use.
  Don't forget to Cancel the clean boot once you have completed the steps running the Fixit.

  Please be patient. If you want to see if updates are available but are regulated, check WindowsUpdate.log: How to read the Windowsupdate.log file
  Scroll down for the latest entries. IF updates are regulated, you will see an entry or entries that are similar to this:

  2009-08-17 07:36:45:739 980 370 DnldMgr rules: {9482F4B4-E343-43B6-B170-9A65BC822C77}-DAA5C9BF-D188-40FE-AF01-DFC72D5D422A update is the 'priority' regulated and can NOT download. The sequence 5472 vs AcceptRate 0. MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012

• My firewall of Windows 7 will not take the updates more

  How do update you my Windows Firewall that stopped taking updates?  Sound not to get your updates.  How can I solve this problem?

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  The Windows Firewall doesn't in any way requires any maintenance feature.

  If you are referring to Windows Update.

  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Windows Update will not start work until I run the update utility.

  Original title: Windows 8 - Windows Update

  I have a desktop with Windows 8.  Pre-installed - computer is 1 year.

  Whenever I run my Windows Update to download/install updates - it always shows as downloads but it comes in fact does nothing and just "of the acts' as is the download but nothing happens.  Then I run the windows update convenience store (in Control Panel) and he told me that the problem is "fixed".  So I run windows update again and it works.

  But the next time it's the same thing as above - doesn't work - run the troubleshooter, and then it works.  I need to run the troubleshooter and to resolve the problem, almost everytime before the windows update will work.

  How can I get a permanent fix?

  Hello

  I suggest you follow the steps in the link below. Chose Windows 8 option from the menu drop down to follow the correct steps.

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  http://support.Microsoft.com/kb/947821/en-us

• Name of the application server on window

  Hello
  Is it possible to get the name of the application server somehow during the execution of a form (Forms 10 g 2). We want to show in a matter of window.
  Is see no possibilities get_application_property or webutil functions that can do the job.
  
  Best regards Erik
  
  Published by: Erik Trip - Darwin THERE on November 25, 2009 08:29

  There are several ways in which it can be done. However, the exact way depend on the platform and the method you prefer. Here are a few options:

  OPTION 1:_
  Create a variable in default.env which contains the host name. For example:

  Host name = myMachine

  In your form, you can retrieve this value by using the following:

  TOOL_ENV. GetVar ("HOSTNAME", unevariable);

  OPTION 2:_
  Get the information from view V_$ SESSION. Needed to use this method, users CHOOSE to view or you can create your own. For example, something like this:

  Declare
       the_host     varchar2(255);
       this_user     varchar2(255);
  Begin
       this_user := GET_APPLICATION_PROPERTY(USERNAME);
       select distinct machine into the_host from v$session where username = this_user and program LIKE 'frmweb%';
       MESSAGE (the_host);
  End;
  

  OPTION 3:_
  Import the necessary java into your application and call it to retrieve the host name. There are many examples of java code on the Internet.

  http://www.Google.com/search?q=Java+get+hostname

  Be sure to compile the code using the version of java used in the version of the application server that you are using. Here are the versions of java:

  10.1.2 application server: use JDK 1.4.2
  Server applications (FMw) 11.1.1: use JDK 1.6.0

  If you try to compile the java with a newer version than the version used by the Oracle Home, your code may not work correctly or may not import correctly into the form.

  There are probably many other ways to accomplish what you want. I hope this helps :)

  Michael Ferrante
  Senior Principal Support Engineer
  Global Technical Manager of forms
  Oracle USA

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• webutil read file function finds the file on the application server

  Hello

  I want to select and read a file (possibly .pdf) and save it to the database.

  To achieve this, I:

  1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

  (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

  and the image format is "tiff".

  (3) wrote the following piece of code to perform the selection of local file (successfully)

  Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

  RETURN VARCHAR2

  IS

  vPath Varchar2 (128);

  vFileName Varchar2 (256);

  vFileFiltre Varchar2 (200): = i_FileFiltre;

  Begin

  vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

  vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

  (

  vPath,

  '',

  vFileFiltre,

  "Select the file to download.

  ) ;

  Return vFileName;

  END selection;

  The form above function call is:

  Declare

  vFileName Varchar2 (200);

  Begin

  vFileName: = PKG_File_Ops.Selection;

  If vFileName is not null then

  : eq_deltia_metakinhshs. Filename: = vFileName;

  End if;

  End;

  (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

  client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

  substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

  "eq_deltia_metakinhshs.deltio_image");

  The call to the packaged procedure client_image.read_image_file does not work. It returns error

  "47109 - cannot locate the/u01/oracle/temp /... image file"

  In other words, the system will search to read the selected file locally on the server App.

  What can be the cause of this?

  With regard to the content of the webutil.cfg of the App Server. :

  # ---------------------------------------------------------------------------

  # webutil.cfg - WebUtil default configuration file

  # ---------------------------------------------------------------------------

  # This file contains all the configuration settings for webutil. These are some

  # divided according to the following sections:

  # 1. Logging options

  # 2. Installation options

  # 3. Upload a file and download Options

  # 1. Logging options side server for recording the log messages and errors

  # You must set logging.enabled to true to allow registration of mid-range. Without this

  logging of mid-range # will not be any PL/SQL or URL options

  # are provided to turn it on. Once recording is activated the other settings are

  # in-game.

  #

  # Details

  # -------

  # logging.file: sets the file name and location of the log file.

  # Note that WebUtil does no management of the log file. You can

  # need to manually clean this file at any time.

  # logging.enabled: can be TRUE or FALSE

  # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

  # only errors and the normal information log messages

  # are written to the log file. It would be for the use of the product,

  # normally be set to TRUE

  # logging.connections: can be TRUE or FALSE. Setting to true causes each

  connection from a client using WebUtil for write in #.

  # the log that it puts in place.

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  # 2. Installation options

  # WebUtil needs to download files on the client to perform

  # some operations such as OLE integration or access to the registry. These files

  # are downloaded on the client when webutil is run for the first time.

  # Subsequent executions will use the dll in the cache. Define the location of the

  # These files on the server and the location on the client.

  #

  # Here's a chart that shows numeric constants and their meanings. They

  # are used in configurations of installation options. These constants are defined

  # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

  # is generally the architecture of the JAVA virtual machine that runs on the client,

  # not necessarily even the real client architecture of BONE.

  #

  # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

  # 0-0 - 32-bit Windows

  # 1 Linux 1-64-bit architecture

  # 2 SOLARIS

  # 3 HP

  # 4 AIX

  # 5 mac

  # 9 unknown

  #

  # < Package > - package name

  # 7 WEBUTIL_OLE2

  # 9 WEBUTIL_C_API

  # We do not yet have downloads for other packages. If you need, refer

  # Spec package WEBUTIL_CORE for constants of other packages

  #

  # Details

  # -------

  # NOTE: For all < arch > parameters field is optional. Without this field, the

  # setting will apply to the client 32-bit and 64-bit OS (FMV)

  architectures of #.

  #

  # install.syslib.location. < os >. < arch >:

  # The virtual path of the directory containing the webutil library files the

  server-side of #. This must be an absolute URL or a relative URL

  # for the documentbase.

  # NOTE: < os > field is optional for this parameter. In the absence of a framework

  # which has the client OS and ARCH, it will use

  # install.syslib.location. < arch > cannot be specified if < os > is omitted.

  #

  # install.syslib.location.client. < os >. < arch >:

  # The path to the directory on the client machine where the webutil library

  # files will be downloaded. This must be an absolute path or a path

  # which is the profile of the client user or at HOME. Directory will be created

  # If necessary as well as other parent directories. If the path is

  # do not set, it will be treated as a special case where the libraries will be

  # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

  # Directory is changed, all libraries will be redownloaded again.

  #

  # Please keep in mind that other forms server may also have a similar

  the location of # and so libraries could be overwritten even when

  # client running webutil server of different forms. It is therefore

  # advised that the location has a subdirectory that may be unique to your

  # Server, such as the name of the host server. You could use $(SERVERHOST) in the

  # location. This string will be replaced with the actual hostname of the server

  #

  # install.syslib. < os >. < arch >. < package >. < n >:

  # The names of the libraries required for the particular webutil beans. The

  # format of it's name. size | version | showDownloadDialog. Several libraries

  # can be downloaded per package. But make sure the values < n >

  # row and start at 1 for a given operating system, arch and package together.

  install.syslib.Location=/webutil

  install.syslib.Location.0.0=/webutil/Win32

  install.syslib.Location.0.1=/webutil/Win64

  # Add/Edit the following if you want to specify a different location client

  # where syslib libraries.

  # Format:

  # install.syslib.location.client. < os >. < arch > = < location >

  \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

  \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

  # Change the size and the version if necessary, such as when the upgrade of the library.

  # Normally this is not necessary since most of these libraries are equipped

  # settle. Jacob does not however come with installation

  # Format:

  # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

  install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

  install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

  install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

  # You can also add your own libraries here, for example

  #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

  #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

  #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

  # 3. Download / upload options

  # For file upload and download options, you can set the default locations

  # on the server that webutil can use as a work space. Optionally, you can pass

  off # upload and download

  #

  # Details

  # -------

  # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

  # disable upload and download of data

  #                                server.

  # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

  # disable the upload and download from the

  application server #.

  # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

  # store temporary files uploaded by the client.

  # If no location is specified, application server

  # user_home/temp will be assumed.

  # This place is always readable and accessible writable

  # No matter the parameters of

  # transfer.appsrv. * are. This parameter is

  # If you need side customer

  # READ/WRITE_IMAGE_FILE procedures.

  # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

  # that loads and downloads can occur

  # the directories named in the

  # transfer.appsrv.read.n and

  entries transfer.appsrv.write.n # and their

  subdirectories #. If this parameter is set to FALSE,

  # transfers can happen anywhere.

  # transfer.appsrv.read. < n >: list of directory names that downloads can read

  #                                from.

  # transfer.appsrv.write. < n >: list of directory names that mail can write

  #                                to.

  #NOTE: by default, the file transfer is disabled by security measure

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  transfer.appsrv.workAreaRoot =

  transfer.appsrv.accessControl = FALSE

  #List transfer.appsrv.read. < n > directories

  Transfer.appsrv.Read.1=c:\temp

  #List transfer.appsrv.write. < n > directories

  Transfer.appsrv.Write.1=c:\temp

  # 4. Others

  # Details

  # -------

  # BlockAllowHeartBeat: Continue the heart beat communication with the

  # Server when set to TRUE. By default, the value is

  # the value False. If set to False, there is no heart

  # fight mode blocking communication.

  BlockAllowHeartBeat = False

  Notes:

  The database version is 11g v.2

  Forms services version is 11g v.2

  The webutil has been installed and configured (I have done a project that requires reading a

  saved locally excel file - using webutil_ole2.)

  I didn't notice an error in the Java console.

  Thank you

  SIM

  This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /

  
  

  If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

  (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.
  

  3) Transfer.appsrv.Write.1=c:\temp. It is already set.