File sharing and replication, some questions

Similar Questions

• Centre network and sharing that network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything

  just noticed on my network and sharing center that the network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything thank you.

  If you do not share with another PC or XBOX Media Center, then your file and media sharing must be turned off.

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• Domain network cannot activate file sharing and print?

  Hi all

  I get an error message when you try to share a folder "an error has occurred. trying to share folderxxx Incorrect function ". After research I see that file and printer sharing is not enabled.

  I went to control panel | Network and sharing Center. Advanced settings - sharing on the "Discovery of the network" and "File and printer sharing" I select "turn on...» "for one or the other and save changes - but neither is saved! Ebb in advanced sharing settings both return to "Turn off"... "State. (I am local and domain admin).

  Windows 7 computer is joined to a domain and the firewall settings are defined mainly through Group Policy, although local settings are allowed (merged).

  I would add that I can access the admin shares (c$, d$) on the computer without problem on the network so advanced in this regard firewall settings are ok.

  At a loss as to why file and printer sharing will not allow?  Thank you.

  I found what was wrong or the problem.

  During the process of deployment of our new systems Windows 7 wipe us the rules of default outgoing firewall who do seem to not be a problem because outbound connections have been set by default to "allow". But we have learned that only when outbound rules for file sharing and printer available (enabled or not) can share news can be created.

  After the creation of the joint ownership, these outbound rules can be removed and sharing still works fine to keep rules to incoming traffic.  I guess this is normal, but it is not quite make sense to me why the outbound rules are explicitly required for files and printers share when you create a share... but that is what has worked for us.

  David (toyNN)

• File sharing and print with XP - Windows 7

  Is it possible to share files and a printer with 1 under Windows 7 Home Premium desktop computer connected to a router and 1 laptop running Windows Xp (wireless) connected to the router (wired). and 1 printer connected to the desktop computer?

  I know that Windows 7 made workgroups can I still share with 2 different OS?

  Yes, it is possible.  These pages show how do:

  Sharing files and printers with different versions of Windows
  Networking of computers running different versions of Windows
  Share files and printers between Windows 7 and XP Boulder computer Maven  
  Most Microsoft Valuable Professional

• The setting of file sharing and printer in my LAN adapter is being turned off when I reboot. Why? What could be responsible for this?

  I put the file and printer for Microsoft Networks share on IT in my LAN adapter properties. When I reboot it has itself turned off.

  My PC running Windows 7 64 bit.
  With leader & Printer Sharing, I am able to access the files on another PC 32 bit Windows 7 and the PC can access mine. After a reboot of my PC is possible - file & print sharing has set itself off the power in the properties of the adapter on my PC (the other PC is still OK).

  In Control Panel / advanced sharing settings I also file and the specified printer sharing option - and which remains lit on a restart. But it seems that it is not enough to allow these two PC to see each other.

  When I turn on sharing in the properties of the adapter to the printer & file, the two computers can then see each other (restart is not required).

  On the other PC, file & printer sharing survives through a reboot without reinitialization.

  I removed the two PCs of our homegroup yesterday evening to try to identify where the rub.
  My PC is to use the standard Windows Firewall current t.

  It is an aspect of various strange problems, I was 'enjoying' with Windows 7.  Following suggestions of the other forums, I turned off of packages jiumbo and created a connectionid identical on both systems. The Intel web site confirms that I have the Intel network adapter driver.

  It's very strange. Any suggestion will be highly appreciated.

  I think that I found the cause of the problem.
  It is a Lenovo Thinkpad and it comes with 'Logins', software to help manage network connections.
  Buried deep in the settings is a security option disable file and printer sharing.  I disabled that and will test by restarting later.

• I am trying to configure MÜDE for my organization using Oracle BI administrator and have some questions about its feasibility. Please help me.

  I'm looking for in the MUDE (multi development environment - user) for future developments of the RPD and I tested various scenarios and I came across a few questions:

  1. do you think that we can add new objects to an existing project without checking in?

  2. in case I missed a few items for development while creating a project, so how do I add them to the project?

  3. special security on objects - it can handle special security on objects (example fields assigned to hidden only)?

  4 should we we look at a timetable of the releases (only the new changes to RPD each 60 / 90 days?)

  I know that few issues may be vague, but any idea on those who could help me a lot.

  Thank you in advance!

  I don't want a double amount of answers. Because I have no response from the other group felt that it was in the wrong place or group sleeping and it took a double signal. Of course, I will be closed one of them when the answers start coming.

• I am trying to configure MÜDE for my organization and have some questions about its feasibility. Please help me.

  I'm looking for in the MUDE (multi development environment - user) for future developments of the RPD and I tested various scenarios and I came across a few questions:

  1. do you think that we can add new objects to an existing project without checking in?

  2. in case I missed a few items for development while creating a project, so how do I add them to the project?

  3. special security on objects - it can handle special security on objects (example fields assigned to hidden only)?

  4 should we we look at a timetable of the releases (only the new changes to RPD each 60 / 90 days?)

  I know that few issues may be vague, but any idea on those who could help me a lot.

  Thank you in advance!

  1 MUD is based on projects of RPD - amending the RPD requires checkout / mud
  2. proposed adjustments are made in the DPR MUD Master

  3 Please give details...
  4 RPD development should be managed and disciplined; cadence of releases is entirely up to you.

• DW CS6 file save and open the Question

  I noticed this glitch in DWCS6 and also Flash CS6, for example, if I crop an image in Photshop and save in a folder, open the folder and see the file inside. Now, I open Dreamwever and go to add the file (which is a jpg file) to an html page. But when I open and navigate to the folder that the file is located in he's not here.

  I tried a few times and have no idea why this is.

  I'm a Lion as mentioned 10.7 DWCS6 running

  any help that slows me down.

  RD

  Permissions of suffocating, resolved!

• How can I disable the file sharing without Windows Firewall is turned on? (I use Norton 360 and he doesn't have two firewalls running at the same time.)

  When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.

  Hello

  Check this box

  How to enable file sharing enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.html

  If no joy collate Support Norton/Symantec and Forums

  Norton support
  http://www.Symantec.com/support/index.jsp
  http://www.Symantec.com/Norton/support/DTree.jsp?PVID

  Norton forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• Windows vista and playstation 3 - I do not know how to get my PlayStation 3 appears on my network and I don't know how to enable file sharing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Google comes up with these:
  http://www.ehow.com/how_5074747_network-PlayStation-computer.html
  http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
  http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
  http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• Why only download family movies shared and not stream

  I use the family sharing and for some reason that my children need to download a movie, I buy to watch while I always listened to?

  Hi bjohnson33,

  I understand that you have a question about the sharing of family and purchased movies streaming.  Family sharing is used to share the iTunes purchases by downloading the content.  For streaming content, you should always use home sharing.  Here's how it works:

  Use home sharing to share iTunes content with other devices

  Home sharing lets you share and stream content from the iTunes library on your computer to other computers and Apple TV iOS devices.

  Use the home sharing on your Mac or PC

  You can use Home sharing with up to five computers on your home network. Follow these steps to use home sharing:

  1. Open iTunes on your computer.
  2. Sign in with your Apple and the password. Use the same Apple ID to each computer or device on your network to share at home.
  3. Go to file > home sharing.
  4. Turn on home sharing.

  Use the home sharing on your iPhone, iPad or iPod touch

  1. Go to settings > music or settings > videos.
  2. Scroll to home sharing.
  3. Press Sign in.
  4. Then, enter your Apple ID and password. Use the same Apple ID to each computer or device on your network to share at home.

  You can now use home sharing on your iOS device:

  • To take advantage of shared videos, open the video application, touch Shared and select a library.
  • To take advantage of the shared music on your iPhone or iPod touch through home sharing, open the music application and tap my music > library. For iPad, type just my music. In the screen that appears, click on the category near the middle of the screen. Tap on Home Sharing, and choose a shared library to connect to.
  • 

  Use the home sharing on your Apple TV

  1. On your Apple TV (4th generation), go to settings > accounts > home sharing. On earlier models of the Apple TV, go to settings > computers.
  2. Turn on turn on home sharing.
  3. Then, enter your Apple ID and password. Use the same Apple ID to each computer or device on your network to share at home.

  See you soon!