FileReferenceList does not return a complete event

Similar Questions

• Run query does not return a lines

  Hello

  I find that the Executequery code does not return everything.

  {

  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);

  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);

  Dim Query = "select CODE a.secondary_uom_code, (select b.unit_of_measure from MTL_UNITS_OF_MEASURE b where b.uom_code = a.secondary_uom_code) GLU, xxtmxc_primary_selling_suom (: 3, a.inventory_item_id) ' PSUOM from mtl_system_items_b where a.inventory_item_id =: 1 and a.organization_id =: 2 and a.secondary_uom_code is not null ';"

  'UNION select 'OUR' CODE, UOM 'Number', 10 double PSUOM;

  String query = "" select secondary_uom_code CODE of mtl_system_items_b where inventory_item_id =: 1 and organization_id =: 2 and secondary_uom_code is not null '; "

  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");

  pageContext.writeDiagnostics (this, "message query" + Query, 1);

  PreparedStatement stmt = conn.prepareStatement (Query);

  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);

  stmt.setString(1,Item);  ver1

  stmt.setString(2,Org);  ver1

  stmt.setInt (3, Dis.intValue ());

  stmt.setString(3,Dis);

  stmt.setInt (3, Ext.intValue ());

  stmt.setString (3, Ext); ver1

  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);

  ResultSet resultset = stmt.executeQuery ();

  pageContext.writeDiagnostics (this, "Resultset" + resultset, 1);

  If (resultset.next ())

  for (ResultSet resultset = stmt.executeQuery ();)

  ResultSet.Next ();)

  While (resultset.next ())

  {

  String code = resultset.getString ('CODE');

  String uom = resultset.getString ("UOM");

  String psuom = resultset.getString ("PSUOM");

  row.setAttribute ("UomCode", code);

  row.setAttribute ("UnitOfMeasure", GLU);

  row.setAttribute ("LineAdjustedPercent", psuom);

  pageContext.writeDiagnostics (this, "secondary UOM" + resultset.getString ('CODE') + resultset.getString ("UOM") + resultset.getString ("PSUOM"), 1);

  pageContext.writeDiagnostics (this, "secondary UOM" + row.getAttribute ("UomCode") + row.getAttribute ("UnitOfMeasure"), 1);

  pageContext.writeDiagnostics (this, "LineAdjustedPercent" + row.getAttribute ("LineAdjustedPercent") + "PSUOM" + resultset.getString ("PSUOM"), 1);

  }

  ResultSet.Close ();

  stmt. Close();

  }

  catch (SQLException sqle)

  {

  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);

  }

  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");

  }

  }

  }

  }

  Hi Bobo,

  I tried the same requirement in my local instance and changed the code for you.

  Please check process requires working Code of the form below:

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  OAViewObject QuoteLinesLevel70VO1Obj1 = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj1!=null)
  {
  If (QuoteLinesLevel70VO1Obj1.GetCurrentRow ()! = null)
  pageContext.writeDiagnostics (this, "Current Row" + QuoteLinesLevel70VO1Obj1.getCurrentRow () .getAttribute ("UomCode"), 1);
  }
             
  pageContext.writeDiagnostics (, "concluded Save Button", OAFwkConstants.STATEMENT);
  If ("Event.Go".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))
  {
  OAViewObject QuoteLinesLevel70VO1Obj = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj!=null)
  {
  pageContext.writeDiagnostics (thie, 'enter in Count' + QuoteLinesLevel70VO1Obj.getFetchedRowCount (), 1);
  int count = QuoteLinesLevel70VO1Obj.getFetchedRowCount ();
  RowSetIterator Iter = QuoteLinesLevel70VO1Obj.createRowSetIterator ("Iter");
  {if(Count>0)}
  Iter.setRangeStart (0);
  Iter.setRangeSize (count);
  for (int i = 0; i)<>
  {
  OAViewRowImpl row = (OAViewRowImpl) Iter.getRowAtRangeIndex (i);
  If (row.getAttribute ("InventoryItemId")! = null & row.getAttribute ("OrganizationId")! = null)
  {
  String Item = row.getAttribute("InventoryItemId").toString ();
  String Org = row.getAttribute("OrganizationId").toString ();
  Number say = (Number) row.getAttribute ("LineAdjustedPercent"); LineAdjustedPercent
  Dim Ext = (String) row.getAttribute ("Attribute1");
                            
                             int item1 is Integer.valueOf (Item) .intValue ();.   Converted entire string
  int Org1 is Integer.valueOf (Org) .intValue ();.     Converted entire string
  Try
  {
  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);
  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();
  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);
  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);
  String query = "select xxtmxc_primary_selling_suom(:1,a.inventory_item_id) PSUOM from mtl_system_items_b where a.inventory_item_id =: 2 and a.organization_id =: 3"; Index link //Changed
  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");
  pageContext.writeDiagnostics (this, "message query" + Query, 1);
  PreparedStatement stmt = conn.prepareStatement (Query);
  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);
                                  Item1 is Integer.valueOf (Item) .intValue ();. Converted entire string
  ORG1 = Integer.valueOf (Org) .intValue ();  Converted entire string
  pageContext.writeDiagnostics (this, "Param1 all" + item1, 1);
  pageContext.writeDiagnostics (this, "Param2 all" + Org1, 1);
  pageContext.writeDiagnostics (this, "Param3 all" + Ext, 1);
  stmt.setString(1,Ext);
  stmt.setInt(2,item1);  ver1
  stmt.setInt(3,Org1);  ver1
  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);
                                  
  for (ResultSet resultset = stmt.executeQuery (); resultset.next ();)  //Used for loop in Resultset
  {
                                     
  String psuom = resultset.getString ("PSUOM");
  pageContext.writeDiagnostics (this, "[AJ] z:" + psuom, 4 "); //Here we got the value of the function
  pageContext.writeDiagnostics (this, "m [AJ]:" + Ext, 4);
                                      
  }
                                  
  stmt. Close();
  }
  catch (SQLException sqle)
  {
  pageContext.writeDiagnostics (this, ' [AJ] with the Exception: "+ sqle.getMessage (), 4");
  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);
  }
  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");
  }
                            
  }
  }
                   
        
  }
           
  super.processFormRequest (pageContext, webBean);
  }
  }

  Thank you

  Dilip

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• HP 640 c: HP640c cartridge does not return to its original position and the printer will be no print anything

  Printer cartridge does not return to its original position on the right side of the printer after the top cover is opened, with the resume light continues to Flash.

  After restarting the printer, the cartridge moves to the right, but not all the way and remained there when the printer is off.

  The printer will not print anything.

  How can I get the cartridge is positioned correctly?

  Solved the problem... it's a defective color print cartridge, which was the carrage Act strangely.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• PC Windows 7 does not return the document or the printed page

  I had a setting for this in XP control but can't find the page, that I got it.

  This occurs in AN application, or a browser.  I print from a workbook Excel specific, for example, when I have a number of them opens.  The system does not return the workbook that I printed.  It's maddening and causes all sorts of questions.  Searching the Web for this instant product nothing and I know I can't be the only person who saw this.

  It is a platform of Windows 7 in a commercial network environment.  I use the snap Menu Addintools classic because I can't stand the Ribbon and never loved.  In Windows 7, I run a couple of other supplements that restore the XP the taskbar properly use, so you can work efficiently.

  None of the supplements are causing this problem because I was running the same classic Menu Add-in in the XP box and he had the same problem until I found workaround that I don't remember now.

  Everyone knows about this problem?

  Jeff Lynch

  Hello Jeff,.

  Please contact the Microsoft community.

  As the Windows 7 computer is under the corporate network environment, the issue that you are facing is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope the information above has been a useful answer, Mercia back to us if you respect them more.

• does not; process is completed?

  I'm testing my application in the emulator 9530 with 4.7 version. Sometimes the error will occur when I leave my app without doing anything. Error was:

  Eception exception: Application App$ 202009 (151) does not. process is completed

  My app has a thread that runs every 5 seconds to update the user interface.

  No idea what is the problem?

  The problem is that the queue is full.

  In most cases, it occurs when an application calls of invokeLater() several times one after another.

  And there are some applications that are not yet resolved, but new are coming and coming.

• Smartphones blackBerry eception exception: application net_rim_bb_addressbook_app (250) does not. process is completed

  Hello

  I found this error in my BB8520 "eception exception: application net_rim_bb_addressbook_app (250) does not; process is completed"and I can not save or edit contacts in the phonebook. nothing etinterpretation to reinstall the system to an earlier date. Can you help me please?

  It will work! After doing research, you need to delete programs such as yahoo messenger and Windows live ON your phone. They interfere with the address book (uncaught Exceptions is a program that appears when problems arrive). Another thing you don't use or that is not supported by your version must example from applications of police etc. After you uninstall these restart your phone and you have, no more exceptions. Especially delete yahoo and windows live messenger, otherwise it will not work. I am convinced that it works bc I just did this, then your host in advance. Have a good

• Smartphones blackBerry eception exception: Application net_rim_medialibraryplayer (291) does not. process is completed

  Hello world

  I'm listening to music with my blackberry 9700, but as soon as I select a title and click on play all crashes and I have to restart the device.

  After indicating my pin code, I get the error message "eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  What this means and what I can do about it?

  Your help is really appreciated.

  Thank you very much in advance.

  Miriam

  Hi and welcome to the forums!

  "After indicating my pin code, I get the error message" eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  Do you mean your device is password protected, and you enter the "pin" or you

  must enter a PIN in order to listen to a song?

  I guess that your support is on a memory card, if you take it off you have the same error?

  No problem with the ringtones and alerts?

  The first step would be a traction battery as shown below.

  No data will be lost when you do the following: remove the battery while the device is activated.
  Replace after one minute, let the device reboot 10 minutes, see if the problem is corrected. I like to leave the device completely reindex the files.

  If this doesn't solve your problem, try raising the phone in safe mode;

   KB17877 How to start a BlackBerry smartphone in safe mode.

  Check the settings of your media card, if they are correct, reverse them and reset. Then battery pull.

  Use the following settings in the segment of memory of the menu options.
  (options > memory)
  Card support ON
  NONE encryption mode
  Media transfer protocol WE
  WE support mass storage
  Auto enable mass storage support when it is connected TO

  (still in status > scroll to security options > encryption0)

  Make sure of course have no content protection enabled.

  Battery pull what happens?

  If all else fails, I would use the following to verify your card (save the media BEFORE!)
   ' KB14745 ' " Memory card error, please use disk utility control on computer" is displayed on the home screen of the smartphone BlackBerry.

  I've left the best for last, which would be a wipe and charging the device, OS, after a full backup successful device using Desktop Manager.

  Try and see if you can get the following error information:

  KB17215 How to extract information from a BlackBerry smartphone with the Chargers or incorrect command line tool

  And the last would be the device OS reload.

  KB13323 Untrapped exception errors appear on the BlackBerry smartphone

  Let us know how it goes!

  Thank you

  Bifocals

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• ctxrule - match does not return a result

  v.11.1.07 - I created a ctxrule index as described below. However, although a query must match on the given document, it does not return. Any ideas?
  

  begin
  ctx_ddl.create_preference('ot_lexer', 'basic_lexer');
  ctx_ddl.set_attribute('ot_lexer', 'index_stems', 'ENGLOSH');
  end;
   
  begin
  ctx_ddl.create_section_group('ot_sec_group', 'auto_section_group');
  end;
   
  create table ot_profile_test
  (profile_id number,
  query clob);
   
  create index ot_profile_rule_ndx on ot_profile_test(query)
  indextype is ctxsys.ctxrule parameters
  ('stoplist ctxsys.empty_stoplist
  section group ot_sec_group
  lexer ot_lexer');
   
  insert into ot_profile_test values(1, '($apple and $pear) and (1 within food)');
  commit;
   
  exec ctxsys.ctx_adm.set_parameter('log_directory', '/yourdir');
  exec ctx_output.start_log('ot');
  exec ctx_output.add_event(ctx_output.event_index_print_rowid);
  exec ctx_output.add_event(ctx_output.event_index_print_token);
  exec ctx_ddl.sync_index('ot_profile_rule_ndx', '2040M', null, 1, null, ctx_ddl.lock_nowait_error);
  exec ctx_output.end_log;

  Then, run a query:
  

  declare
  a clob := 'apple orange pears banana
  <metadata>
   <indicators>
     <food>1</food>
   </indicators>
  </metadata>
  ';
  vn_profile_id number;
   
  begin
   
  select profile_id into vn_profile_id
  from ot_profile_test
  where matches(query, a) > 0;
   
  dbms_output.put_line(vn_profile_id);
   
  end;
   
  ERROR at line 1:
  ORA-01403: no data found
  ORA-06512: at line 8

  Profile_id = 1 should not be returned?
  
  
  In addition, the log file should not have 2 lines written in $I?
  WRITING APPLE: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0
  WRITING APPLES: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0

  As noted earlier, you must use a list of words, not a lexer to control, like the two conflicts between them. All what you need to do is remove the following line from your code:

  ctx_ddl.set_attribute ('ot_lexer', 'index_stems', 'ENGLISH');

  You can still have a lexer with other attributes; Just do not set the attribute index_stems to the lexer. Set the attribute generator of forms derived from the list of words only.

• sys_context procedure does not return an ip address

  Hello
  
  
  DB 11 GR 1 material
  
  What would be the reason for which this query does not return an IPAddress?
  
  Select sys_context ('userenv', 'IPAddress') of double;
  
  Thank you

  What would be the reason for which this query does not return an IPAddress?

  USERENV does not know what the IP # is.

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select sys_context('userenv', 'ip_address') from dual;
  
  SYS_CONTEXT('USERENV','IP_ADDRESS')
  --------------------------------------------------------------------------------
  

  Maybe it's because you are connected locally & not via SQL * Net

  Published by: sb92075 on October 27, 2010 12:53

• Guest user does not return a value

  I have a user prompt dialog box which is a slightly modified version of questioning the standard user to enter VI express. I tried to change the VI so that it would allow the user to close the command prompt by pressing the enter/return key. The final objective is to have the popup dialog, the user will scan a bar code and barcode reader adds a carriage return, automatic closing of the dialog box character.

  I have followed this user lyrics: https://decibel.ni.com/content/docs/DOC-13973. The only difference between my code and the code it is that my user dialog box returns a string instead of a number. See below for my code.

  

  

  The problem that I am running is the string "Item number2" never really returns any value once it's called. The indicator on the front panel of the updated the express vi displays the correct value after you run, but the value is never returned to the VI, who called the dialog box. The express vi the value default value is successfully returned. The only change I made was the addition of the structure of the event, so I have to assume that my code does not go inside this node.

  Any thoughts are appreciated.

  Adjust the chain drive on 'Update value then of the hit'.

  

• EventLogger events does not appear in the event log Simulator

  So, I was more than a little frustrated with debugging Widget applications and decided to help me a bit.

  I've created a Widget extension that connects to System.out and the EventLogger BB using:

  Logger.Java:

  public class Logger {}

  public static final String APP_NAME = "AppName";
  public static final long GUID = 0xb50dd37e31148effL;

  public static enableLogging() Sub {}
  If (EventLogger.register (GUID, APP_NAME, EventLogger.VIEWER_STRING)) {}
  out ("recorder active.");
  }
  else {}
  ("EventLogger record has failed.");
  }
  }

  /**
  * Prints System.out and event log (if enabled).
  */
  public static {Sub out (String msg)
  String message = formatMessage (msg);
  System.out.println (message);
  log (message);
  }

  /**
  * Prints in the journal of the events with the ALWAYS_LOG level.
  */
  Public Shared Sub log (String msg) {}
  logEvent (msg, EventLogger.ALWAYS_LOG);
  }

  private public static Sub logEvent (String msg, int level) {}
  If (EventLogger.logEvent (GUID, msg.getBytes ())) {}
  System.out.println ("EventLogger.logEvent succeeded.");
  }
  else {}
  System.out.println ("EventLogger.logEvent failed.");
  }
  }
  ...
  }

  The Widget extension works.  I can not even log JavaScript stuff :

  somewhere in file.js:

  Logger.log ("it is JavaScript!");

  as seen by the Eclipse debug console:

  AppName [2010-09-24 12:01:33.609]: active recorder.
  EventLogger.logEvent succeeded.
  AppName [2010-09-24 12:01:33.625]: it's JavaScript!
  EventLogger.logEvent succeeded.

  RIDDLE ME THIS: WHY are the messages NOT sent to the event log Simulator! (9550 or 9800 > tools > Show Event Log does not show my posts.)

  My frustration with BB Monte.

  -----

  Windows XP 32-bit

  Install Eclipse Version: 3.5.2 version identifier: M20100211-1343

  Version plugin Web blackBerry: 2.0.0.201003191451 - 33

  BlackBerry Java plug-in Version: 1.1.2.201004161203 - 16

  BlackBerry Java SDK Version: 5.0.0.25
  BlackBerry Widget SDK Version: 1.0.0.201003191451 - 126

  6.0.0.141 blackBerry SmartPhone Simulator

  As a new BB developer, imagine my surprise when I discovered that the API of EventLogger BB and the BB Simulator event log were completely foreign.

  It's like they're really trying to confuse us.

• Eception exception: Application test1 (176) does not. process is completed

  My application appear error message "Eception exception: Application test1 (176) does not; the process is completed. ", by searching on this forum, it seems that the queue is full." I have a timer thread that publishes events to the event from the queue by like that

  UiApplication.getUiApplication () .invokeLater (new Runnable()

  {

  public void run() {}
  any code to update the user interface

  }

  });

  My Question: Is there a way to check how full (number of items) is the queue of the event? What is the maximum elements it may contain?

  A related question:

  Can I replace all the invokeLater() call with UI code in a worker thread associated with acquiring the lock of the event running?

  synchronized (UiApplication.getUiApplication () .getAppEventLock ())
  {
  any code to update the user interface

  }

  This code runs in a worker thread but held event lock, no problem with this code?

  You don't mention your test environment.

  If it's in a real device, you can use the Javaloader utility to retrieve the log of events to a text file, using the USB cable. This utility is provided with the JDE, but you will need to have a recent version of Desktop Manager isntalled to get the current USB drivers for your device.

  Another method (which works on the SIM and the device), is to view the log of the events on the device running or the Simulator.

  For non touch devices, go to the home screen and type:

  L G L G

  To contact devices, go to the home screen and hold the «?» 123"key for a few seconds, then type ', 5, 5".