Files duplicated in the libraries?

Similar Questions

• Some folders in the libraries view 0 files

  In Windows 7, some records in libraries approached through the Explorer shows 0 files and does not open even if they used to work properly, (most records still work) but when I approach them by going to the D: drive the files are all there. I done all the easy things, checked the permissions, etc., but the problem persists. Can you help me? Thank you.

  It is usually a corrupt library.  Try right-clicking on the libraries section, choose new > library and make a new.  Add this folder and check that it works.  If all goes well, right click on the library of old/broken and delete it.

• My file is duplicated in the composition Panel, how to fix this?

  My file is duplicated in the composition Panel, how to fix this? I want to go back to 1 single image of my file, not 2.

  There are two images, I just want a. This has been really annoying me and making it difficult t edit so please help, thank you!

  Forum of the future visitors who might be responsible for the search to find the answer, because you have the same problem, the problem was that he put his audience from two points of view instead of just one. Notice the drop down at the bottom of the composition Panel menu.

• Legend of java ServiceBus - how to pack the JAR file with the libraries?

  Hello
  
  I want to use a legend of Java from a stream of Bus Service.
  
  What is the right way to pack the JAR file with its necessary libraries?
  
  I have tried different methods to pack my POT, but again, as if Java works perfectly workshop (Eclipse), when I try to use the Jar exported on the ServiceBus stream, it fails with a ClassNotFoundException exception.
  
  I would appreciate your advice here.
  
  Thank you
  
  Koby

  Follow the steps: -.

  1. create a java file with a static method that is running your features
  2. in the container, the file use the following command:-

  jar cvf entry file jar-file (s)

  For example, jar cvf Test.jar Test.class

  3. in the Console ALSB, open the session in edit or design mode. Create a folder (if you wish).

  4 inside of this folder, create a resource > Jar. Select the jar file you created above, and then name the resource. Record.

  5 activate the changes.

  6. in the proxy, AddAction service > Message Processing > JavaCallout.

  7 select the resource and method. Click on submit. (Only static methods defined in the file will be displayed)

  8. you can test by logging the response since the Java file.

  I hope this helps.

• new folder on the libraries button does nothing

  Why the "New folder" button works in my library.

  Hi James,

  1. how exactly you are trying to create a new folder?
  2. do you have a code error message when you try to create a new folder?
  3. don't you make changes to the computer before the show?

  4 Windows operating system is installed on the computer?

  5 are logged as administrator?
   
  Method 1:
  Restore default libraries and then try to create a folder in the library.
  Steps to follow:

  a. open a Windows Explorer window.

  (b) in the Navigation pane, click with the right button on the libraries and click on restore default libraries.

  c. try to access the new folder button.
   
  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  If the methods above do not solve the problem, then follow the steps mentioned by Linda Yan dated Monday, May 24, 2010 08:38, the link given below.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I have two different file names, but the files inside of them are exactly the same

  Hi all

  I was running a double Finder folder.  I realize that in my Directory user (c:\users\myname) there are a few paths to the same folder, but referred to by different names.  One of them is C:\users\myname\AppData\Local\ the other folder is C; \users\myname\Local Settings.  Both of these 'files' link to the same files on the hard drive.  The double file Finder think that these files are duplicated because they seem to be in different folders, but they are in fact the same files singled twice.  The C:\users\myname\Local settings directory has a symbol that looks like a shortcut, but it does not behave as such.  There is no way to remove it without deleting the file in the other folder.

  Is a problem in the file system, or is it simply one of the oddities that I should just ignore?

  Thanks for any help

  It is a feature of the NTFS file system. Vista uses in several reasons such as compatibility.

  • http://msdn.Microsoft.com/en-us/library/aa365006 (v = VS. 85) .aspx
  • http://en.Wikipedia.org/wiki/NTFS_junction_point
  • http://en.Wikipedia.org/wiki/Hard_link
  • http://blogs.technet.com/b/joscon/archive/2011/01/06/how-hard-links-work.aspx

• Disabling the 'libraries' in Windows 7

  I don't like the libraries feature and I would not use it. How can I disable or turn off?

  186 Ionic wrote:
  > I don't like the libraries feature and I would not use it. How can I
  > turn it off or disable it?
   
   
  In fact, the concept of 'library' can be very useful, especially if
  you have similar types of data files stored on several disks or
  partitions and is quite easy to ignore if you don't have a
  Use for this at present.
   
  However:
   
  How to disable and remove libraries from Windows 7 Explorer
  http://www.mydigitallife.info/2009/08/05/How-to-disable-and-remove-libraries-from-Windows-7-Explorer/
   
  Disable the new function of libraries in Windows 7
  http://Lifehacker.com/5354879/disable-the-new-libraries-feature-on-Windows-7
   
   
  --
   
  Bruce Chambers
   
  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html
   
  http://support.Microsoft.com/default.aspx/KB/555375
   
  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin
   
  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell
   
  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot
   

• How can I use Powershell to create shortcuts "File Folder" in the section network location?

  Hello

  I am trying to create a powershell batch file that will create a bunch of shortcuts to files to Sharepoint document libraries network.

  To get an idea, the manual method would be to go to computer--> right click--> Add a network location

  From there, I can enter the path of the URL to a Sharepoint document library and it will create a folder shortcut in this library of documents that allow people access to the library without having to go through Sharepoint to access.  So when the user clicks the shortcut, it opens an Explorer window to view and manipulate the files.

  I found the script next, but it will create a shortcut 'Internet' when I put in the path instead of a shortcut of the file folder. So when the user clicks on it, it just opens the web page.  Any help would be great!  Thank you!

  [Environment]: GetFolderPath ("ApplicationData")
  $path = [Environment]: GetFolderPath("ApplicationData") + '\Microsoft\Windows\Network Shortcuts\ACL Documents.lnk.
  $comobject = new-Object - comObject WScript.Shell
  $link = $comobject. CreateShortcut ($path)
  #targetpath can be the UNC path or physical path to .exe
  $link.targetpath = "https://finance.domain.net/ACL/Shared%20Documents".
  $link. IconLocation = '% SystemRoot%\system32\imageres.dll,137 '.
  $link. Save()

  Thank you

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/category/SharePoint2010, sharepoint

• I have that one saved backup system, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  I run the Windows Image backup to a hard drive external on a weekly schedule. The result shows on the hard drive as "WindowsImageBackup\(User name)-PC\Backup (date) (number)"-currently about 80 GB (binary).

  I reserve about 135 GB of available space for backups of the system, so I save only the last backup of the system.

  So far, I have no problem with that.

  However, the disk hard, there is another folder '(USER NAME)-PC' & under which is a folder "backup of files (date) (number)" for each time that the backup system runs.

  These files vary considerably in size - for example, 1 GB, 12 GB, 22 GB. They delete or replace automatically - just, they accumulate.

  What I want to know is ~.

  What is the purpose\importance of these additional files?

  Since I only have a single saved backup, is there a reason to keep additional files prior to the last backup of system? I can remove them systematically?

  Original title: Windows Image backup

  Hello

  Thanks for the reply.

  File '(Computer name)-PC "contains the files necessary for the Windows. Data files saved in libraries, on the desktop, and if the Windows folders for all people with a user account on the computer are also recorded.

  [The default Windows folders include AppData, Contacts, desktop, downloads, Favorites, links, saved parties and searches.]

  The size of these files increases, because the content of the folders mentioned above increases.

  For more information, see the article mentioned below:

  How Windows selects the files to back up?

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-choose-which-files-to-back-up

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• somehow my folders in the libraries folder is missing

  I have windows 7 and somehow my folders in the libraries folder is missing and I can't seem to find a way to get back them. How can I get my folders (my documents, my pictures, my music, my videos) back in the folder libraries make for easy access if you know how could you please please help me. I tried moving them to the libraries folder but it wouldn't let me.

  You use McAfee Antivirus?  It has a bug where it maintains see libraries to hidden.  To restore them, go to your Folder Options and turn on the display of hidden files and folders in the view tab.

• An official way to disable, disable or remove the libraries feature in windows 7?

  I'm looking for one or the official way to disable, turn off or remove the libraries feature in windows 7?

  I know not how,
  http://Windows.Microsoft.com/en-us/Windows7/products/features/libraries
  http://www.MakeUseOf.com/tag/Windows-7-libraries-%E2%80%93-and-why-you-want-them/
  http://TechNet.Microsoft.com/en-us/library/ee449413%28V=WS.10%29.aspx

  Not these please.
  http://www.mydigitallife.info/how-to-remove-and-hide-libraries-group-from-navigation-pane-of-Windows-7-Explorer/
  http://www.SevenForums.com/tutorials/61514-Library-pane-turn-off.html
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/turning-off-libraries-in-Windows-7/18d001dc-5319-440b-B29C-d348f81c929c
  http://www.howtogeek.com/HOWTO/21462/how-to-enable-or-disable-the-libraries-feature-in-Windows-7/
  http://www.askvg.com/how-to-disable-libraries-feature-in-Windows-7/
  http://www.mydigitallife.info/trick-to-open-computer-or-documents-as-default-instead-of-libraries-folder-with-Windows-Explorer-on-Windows-7/
  http://www.TechRepublic.com/blog/window-on-Windows/remove-libraries-from-Windows-Explorer-in-Windows-7/3401
  http://www.windows7hacker.com/index.php/2010/07/how-to-disable-libraries-feature-in-Windows-7/
  http://www.gHacks.NET/2011/11/07/hide-delete-or-customize-libraries-in-Windows-7/

  You left it I think.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/how-do-i-remove-libraries-Favorites-from-Windows/6a52e21a-DACF-47cc-883E-cea9c6af8b2e#footer

  If you do not trust the many lists or are you batting for the same amount of 10?

  Even if it's my favorite,

  http://www.SevenForums.com/tutorials/35627-libraries-folder-add-remove-navigation-pane.html

• My files that are the library (documents, photo, etc.) for windows 8 will not open

  

  This is what appears when I click on the file documents & I can't save anything in the library, please help!

  Hello

  To correct the library, perform the following steps.

  1. open the file Explorer and select the folder parent of libraries in the left pane.

  2. in the right pane, right-click on each library , and then select delete. Confirm deletions.

  3. in the left pane, right-click libraries parent folder and select restore default libraries .

  This recreates the libraries.

  Let us know if you have any other questions.

  Concerning

• After you run microsoft windows update 8, I get an error message when I try to go to the libraries using the Explorer

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  Hello

  See the following instructions to Update libraries and solve this problem.

  1. in the file Explorer , select the folder parent of libraries in the left Navigation pane.

  In the right pane click on the right button of the library of Documents, music, photosand videos by default, and select the Remove option. Click Yes to confirm the deletion.

  (Note: this will not affect the folders or files in this library)

  2. in the Navigation to the left side pane, click on the libraries of parent folder and select restore default libraries option.

  This will refresh the default libraries and should solve the problem.

  If you added all files for libraries folders by default, you need to add these records.

  Let us know the results.

  Concerning

• webutil read file function finds the file on the application server

  Hello

  I want to select and read a file (possibly .pdf) and save it to the database.

  To achieve this, I:

  1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

  (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

  and the image format is "tiff".

  (3) wrote the following piece of code to perform the selection of local file (successfully)

  Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

  RETURN VARCHAR2

  IS

  vPath Varchar2 (128);

  vFileName Varchar2 (256);

  vFileFiltre Varchar2 (200): = i_FileFiltre;

  Begin

  vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

  vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

  (

  vPath,

  '',

  vFileFiltre,

  "Select the file to download.

  ) ;

  Return vFileName;

  END selection;

  The form above function call is:

  Declare

  vFileName Varchar2 (200);

  Begin

  vFileName: = PKG_File_Ops.Selection;

  If vFileName is not null then

  : eq_deltia_metakinhshs. Filename: = vFileName;

  End if;

  End;

  (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

  client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

  substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

  "eq_deltia_metakinhshs.deltio_image");

  The call to the packaged procedure client_image.read_image_file does not work. It returns error

  "47109 - cannot locate the/u01/oracle/temp /... image file"

  In other words, the system will search to read the selected file locally on the server App.

  What can be the cause of this?

  With regard to the content of the webutil.cfg of the App Server. :

  # ---------------------------------------------------------------------------

  # webutil.cfg - WebUtil default configuration file

  # ---------------------------------------------------------------------------

  # This file contains all the configuration settings for webutil. These are some

  # divided according to the following sections:

  # 1. Logging options

  # 2. Installation options

  # 3. Upload a file and download Options

  # 1. Logging options side server for recording the log messages and errors

  # You must set logging.enabled to true to allow registration of mid-range. Without this

  logging of mid-range # will not be any PL/SQL or URL options

  # are provided to turn it on. Once recording is activated the other settings are

  # in-game.

  #

  # Details

  # -------

  # logging.file: sets the file name and location of the log file.

  # Note that WebUtil does no management of the log file. You can

  # need to manually clean this file at any time.

  # logging.enabled: can be TRUE or FALSE

  # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

  # only errors and the normal information log messages

  # are written to the log file. It would be for the use of the product,

  # normally be set to TRUE

  # logging.connections: can be TRUE or FALSE. Setting to true causes each

  connection from a client using WebUtil for write in #.

  # the log that it puts in place.

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  # 2. Installation options

  # WebUtil needs to download files on the client to perform

  # some operations such as OLE integration or access to the registry. These files

  # are downloaded on the client when webutil is run for the first time.

  # Subsequent executions will use the dll in the cache. Define the location of the

  # These files on the server and the location on the client.

  #

  # Here's a chart that shows numeric constants and their meanings. They

  # are used in configurations of installation options. These constants are defined

  # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

  # is generally the architecture of the JAVA virtual machine that runs on the client,

  # not necessarily even the real client architecture of BONE.

  #

  # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

  # 0-0 - 32-bit Windows

  # 1 Linux 1-64-bit architecture

  # 2 SOLARIS

  # 3 HP

  # 4 AIX

  # 5 mac

  # 9 unknown

  #

  # < Package > - package name

  # 7 WEBUTIL_OLE2

  # 9 WEBUTIL_C_API

  # We do not yet have downloads for other packages. If you need, refer

  # Spec package WEBUTIL_CORE for constants of other packages

  #

  # Details

  # -------

  # NOTE: For all < arch > parameters field is optional. Without this field, the

  # setting will apply to the client 32-bit and 64-bit OS (FMV)

  architectures of #.

  #

  # install.syslib.location. < os >. < arch >:

  # The virtual path of the directory containing the webutil library files the

  server-side of #. This must be an absolute URL or a relative URL

  # for the documentbase.

  # NOTE: < os > field is optional for this parameter. In the absence of a framework

  # which has the client OS and ARCH, it will use

  # install.syslib.location. < arch > cannot be specified if < os > is omitted.

  #

  # install.syslib.location.client. < os >. < arch >:

  # The path to the directory on the client machine where the webutil library

  # files will be downloaded. This must be an absolute path or a path

  # which is the profile of the client user or at HOME. Directory will be created

  # If necessary as well as other parent directories. If the path is

  # do not set, it will be treated as a special case where the libraries will be

  # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

  # Directory is changed, all libraries will be redownloaded again.

  #

  # Please keep in mind that other forms server may also have a similar

  the location of # and so libraries could be overwritten even when

  # client running webutil server of different forms. It is therefore

  # advised that the location has a subdirectory that may be unique to your

  # Server, such as the name of the host server. You could use $(SERVERHOST) in the

  # location. This string will be replaced with the actual hostname of the server

  #

  # install.syslib. < os >. < arch >. < package >. < n >:

  # The names of the libraries required for the particular webutil beans. The

  # format of it's name. size | version | showDownloadDialog. Several libraries

  # can be downloaded per package. But make sure the values < n >

  # row and start at 1 for a given operating system, arch and package together.

  install.syslib.Location=/webutil

  install.syslib.Location.0.0=/webutil/Win32

  install.syslib.Location.0.1=/webutil/Win64

  # Add/Edit the following if you want to specify a different location client

  # where syslib libraries.

  # Format:

  # install.syslib.location.client. < os >. < arch > = < location >

  \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

  \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

  # Change the size and the version if necessary, such as when the upgrade of the library.

  # Normally this is not necessary since most of these libraries are equipped

  # settle. Jacob does not however come with installation

  # Format:

  # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

  install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

  install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

  install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

  # You can also add your own libraries here, for example

  #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

  #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

  #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

  # 3. Download / upload options

  # For file upload and download options, you can set the default locations

  # on the server that webutil can use as a work space. Optionally, you can pass

  off # upload and download

  #

  # Details

  # -------

  # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

  # disable upload and download of data

  #                                server.

  # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

  # disable the upload and download from the

  application server #.

  # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

  # store temporary files uploaded by the client.

  # If no location is specified, application server

  # user_home/temp will be assumed.

  # This place is always readable and accessible writable

  # No matter the parameters of

  # transfer.appsrv. * are. This parameter is

  # If you need side customer

  # READ/WRITE_IMAGE_FILE procedures.

  # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

  # that loads and downloads can occur

  # the directories named in the

  # transfer.appsrv.read.n and

  entries transfer.appsrv.write.n # and their

  subdirectories #. If this parameter is set to FALSE,

  # transfers can happen anywhere.

  # transfer.appsrv.read. < n >: list of directory names that downloads can read

  #                                from.

  # transfer.appsrv.write. < n >: list of directory names that mail can write

  #                                to.

  #NOTE: by default, the file transfer is disabled by security measure

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  transfer.appsrv.workAreaRoot =

  transfer.appsrv.accessControl = FALSE

  #List transfer.appsrv.read. < n > directories

  Transfer.appsrv.Read.1=c:\temp

  #List transfer.appsrv.write. < n > directories

  Transfer.appsrv.Write.1=c:\temp

  # 4. Others

  # Details

  # -------

  # BlockAllowHeartBeat: Continue the heart beat communication with the

  # Server when set to TRUE. By default, the value is

  # the value False. If set to False, there is no heart

  # fight mode blocking communication.

  BlockAllowHeartBeat = False

  Notes:

  The database version is 11g v.2

  Forms services version is 11g v.2

  The webutil has been installed and configured (I have done a project that requires reading a

  saved locally excel file - using webutil_ole2.)

  I didn't notice an error in the Java console.

  Thank you

  SIM

  This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /

  
  

  If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

  (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.
  

  3) Transfer.appsrv.Write.1=c:\temp. It is already set.

• DC on Android Adobe cannot REPRODUCE files stored in the cloud 'Document '!

  I use Adobe DC on Android but can't DUPLICATE the files stored in the "Document cloud".  I can duplicate local files, but I want to copy the files in the cloud of document that I have a model it and you want to duplicate for daily use.  Can anyone help please?  Thank you

  Hi Rob,

  PDF cannot be duplicated, which is stored on the Cloud. You can fill out the feature request/Bug report form

  Thank you

  Abhishek