Files NAVE corrupted with streaks of color bands? Is - this transfer or LightRoom?

Similar Questions

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• Movie Maker - corrupted with green flashing screen movie file

  After importing successfully via Firewire MiniDV camcorder movie in avi 'clean' format (tested by looking at a media player).

  I have started working on the edition in MovieMaker, the avi file appears corrupt with annoying intermittent green flashes. This is obvious when you export to another storage medium. Its OK.

  Help, please

  I discovered that the green flashes was on the video that I had downloaded, I noticed the when using other video editing software...  They were on the original video or was caused by the program I used to download...  When I made the film the film on video setting for your computer, seem to make the green flashes more sensitive... Using the avi setting creates a huge file and seems to squish them out of existence...  So my apologies to Microsoft...  The only time where this Director has caused a green flash was after editing a video for a long period of time and I share a video with a green flash appears in the Division...  That would signal that my memory has been exhausted, and I would like to do a disk cleanup and restart my computer, and I could continue to edit the video...    Filmmaker working fine all along so the problem of the mysterious flashing green have been resolved...

• When copying a file in flash memory, a shortcut of the file is created with! Why is this happening?

  When I copy a file in flash memory a shortcut depending on the size of 1 KB from the file is created with the original?

  is this a virus?
  What is the solutions for that?

  Sorry, I misread your question. I thought that you receive only a shortcut.

  I don't know what would cause. Have you tried with another flash drive? Have you tried to format the flash drive that you use, when there is nothing on what you need?

  It won't hurt a thing to check for malware. Download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• Photoshop questions color bands appear in the PSD files?

  I hope I can get help with a problem I've had with Photoshop or my PC.   I use Photoshop to make the illustration work.  My problem is that some of the work files I've saved get magenta or green strips through them when I reopen it.  This has happened more recently.  They are not a few strips of color, it's like a bunch of a part of the illustration is projected onto another area, and this band discolour the part of the illustration it is superimposed on.    Files of closing and reopening will not fix the image, or don't restart PS, but restarting the computer succeeded in restoring the images, however, corruption continues happening randomly with other files.   Anyone know what is the cause and what can I do about it?    I tried to disable the graphics processor and change the drawing to basic mode, etc.   I don't know if the problem is from photoshop, my pc or my graphics card. So far, only to restart my PC will correct the image, but I really want to solve this problem, so he continued to occur.

  Thank you very much for your time!

  Here's an article on it: corruption - file recovery corrupted Photoshop cs6 - Super User

  Outside the hibernation cause problems, perform a routine maintenance, disk cleanup, check the disk Defragmention and of course as suggested, turn on the history of the file or the shadow copy.

  Also to reset the Photoshop preferences.

  

• Problems with importing photos using Windows - Photo files are corrupted in the Gallery windows

  I use Windows to import images from my camera (Canon Rebel EOS) to the computer (HP) and display them in the Windows Photo Gallery.  Recently, the photos in the Gallery become corrupt once downloaded, which means they download fine then when I open "Images" to see in the Gallery, they photos each are corrupted with ribbons of various colors, or the image is cut into strips to compensate.  It didn't happen when I uploaded the same photo files to another computer so I know that is not the fault of the camera or individual files.  I scanned for a virus (I use AVAST).  Can I fix this, or is there any other software I should use to download files?  I'm just a MOM ol ' ordinary looking to transfer the zillions of photos that I take my children.  Help!

  Hello

  Welcome to the Microsoft Answers community.

  Try to rebuild the database of photo gallery that should remove corrupted files that could cause this problem. Do follow the steps mentioned below.

  Photo of C:\Users\[username]\AppData\Local\Microsoft\Windows

  Gallery\Pictures.PD4

  Rename the file Pictures.Pd4 to Pcitures.Pd4.old

  Retstart the photogallery program check what is happening.

  Run a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning

  Anthony.

• Problem with. The NAVE (pictured with D90) - files cannot open pictures

  I get message "could not complete your request because an end of file unexpected has occurred" when I try to open some. NAVE in ACR (version 6.3 in PS CS5) files. Similar results when I try to open it from Photoshop CS4, but the message is "could not complete your request because of a program error". Some. Files NAVE created the same day (on the same card) and downloaded to the folder opened without problem.

  I would appreciate your advice on how I might be able to recover the images. THX.

  • IrfanView shows approximately 2/3 of an image of 4288 x 2848, the lower part being gray way.
  • Windows 7 image viewer shows the same upper part of the image, with the lower part being screwed upward - for example, offset on the side, and in part with the loss of contrast.
  • Reports end of file unexpected met Photoshop.

  Here is what Windows Picture Viewer shows, which could provide enough information to reconstruct the file, with an elbow grease.

  

  This file is clearly corrupt.  How it happened, I can't say.

  -Christmas

• Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

  I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

  While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

  I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

  Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

  I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

  I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

  I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

  This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

  I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

  I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

  I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

  I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

  And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

  Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

  Thank you

  Vernon

  When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

  If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

  go here for instructions on deleting the recovery console.

  ===========

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  ===============

  as for the other problems:

  did you use Registry cleaners?

  These can damage your system

  You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

  ===============

  Checkdisk with parameter/r should be run. and run it again until there is no error.

  ==========

  you are fully updated and patched to Microsoft updates?

• My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  My Cookie file was corrupted in data and my programs continually pop up with the 'corrupt file' error when a program opens, pointing to \Users\name\Appdata\Roaming\Microsoft\Windows\Cookies.

  The problem is, Chkdsk will not fix this, and I can't access the file. This opens up a world of problems when I need to fix this error, so I can upgrade to Windows 7. Help, please!

  I just ran the scan again. He said of the errors found, but could not be repaired.

  This problem actually has nothing to do with internet explorer. It's the cookies folder that is corrupt in the Windows folder in roaming. The error file is in conjunction with the programs, that I try to run (AIM, Skype, so forth). Trying to enter the folder it says it's corrupt. I don't know what is the root of the problems or how to solve this problem, but these measures have not helped so far. Regarding the repair, I will try that next.

  http://Tinypic.com/view.php?pic=14mw4ly&s=4

  Here is a picture. This is the error of the lower right

  It's what the tool SFC to see system files corrupted and try to repair the system files.
  SFC could not fix it.

  Looks like you will need to do this:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Read the info on the link above.

  Good luck with it.

  Let us know how you go with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 backup error: the file is corrupt or has been tampered with. Error code is 0 X 80041321

  After coming back to Windows 7 pro to windows 10 I'm not long able to back up my computer.  I get an error message saying: the file is corrupt or has been tampered with.  Error code is 0 X 80041321.  Any help will be greatly appreciated.

  Original title: backup Windows 7

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  I would say first of all allows you to check if the Volume Shadow Copy service is running.

  1. click on Start, type Services in start search. When the page is open, find shadow copy Volume service.

  2. right clickon the Volume Shadow Copy service (VSS) and check whether it is started.

  3. If it is stopped, select Start or restart.

  Check if you are able to backup.

  Step 2: If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.

  Step 3: You can also try to remove the task from the location:
  
  C:\Windows\System32\Tasks

  How to find which task is damaged or altered.

  3. click on Start; Search type cmd in the list on the start menu, programs, right click on cmd and run as administrator.
  4. now run the following command

  schtasks/query | findstr /i

  Search:

  ERROR: the task image is damaged or has been tampered with.
  ERROR: task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  1. click on Start, type Task Scheduler in the start search box, and then click Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. in the Actions of the Task Scheduler dialog box, click on create a new task.

  Check whether the problem is resolved.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• If an illustrator file has links with spot colors, how can I create PDF files with process colors?

  My file has shades of tones that came with the linked logo, I could not find a way to convert those shades of colors quadri.

  I need to send PDF on a printer with only process colors, I know that the printer can choose to convert spot colors to process when printing with printer within Acrobat Panel, but since we do not print, we need to send files to print ready with process colors only.

  Is there a way or a script to make PDF file generated from Illustrator with process colors only?

  You could try object > flatten transparency and clear colors to preserve overprints and Spot.

  I set the preset high resolution and turn on the preview to see if something dramatic is going to happen.

  After that, you can check the file of color dot in the separations Preview Panel.

• R610 SAS6IR with SSD RAID 1 file system Corruption

  Hi all!  I worked on a recurring problem with some Dell R610 servers upgraded with the ruhnning controller SAS6IR a pair of Kingston SSD 256 GB in a RAID1 configuration.  I have 5 of these servers and are all identical and all have the same issue, this is why I'm leaning - point anyway - more than a question of settings rather than material because I swapped around the servers as well as SSDS them has tested in a R710 and the question arises in all R610s but the 710 using the same disks is not the issue.

  Yes, on the real problem: corruption after being shut down the system of files and shut down by the operating system - not power failure or power button.

  I tried to use Ubuntu Linux, RHEL7, Windows Server 2 k 8 and I saw the question in the O/Ss Linux but not Windows - same XenServer worked perfectly after a weekend 4 days, which lends to thinking me it is on Linux.  All appears well in the main bios and 6IR as much as all the disks/RAID volumes and run diagnostics on readers shows that they are all in good health.  I can install and reboot until the cows come home, home and there is no problem.  But when I shut down the system completely (this is a test environment and not yet in in production environment) using the option to stop the operating system and with elegance stops the system and turning off the power, but not to disconnect the supply plug/UPS when I turn back - usually after be closed from one day to the next, but also did the same an hour or similarly - messages just fine and starts the boot sequence.  The matrix RAID and Volume is found, and the operating system starts the startup.  It was then that the system will come to a prompt instead of the graphical interface or will stop with an error of file system corruption saying there are some deleted inodes.  I am trying to download the Dell Diagnostic DVD and let's see what he comes up with, but this issue has been frustrating me for almost 2 months now that I struggle to find what is the cause.

  Any additional information required, please let me know.  Thank you in advance.

  Scott

  I discovered that it was indeed the RAID controllers in the R610.  The particular version of the PERC 6 was not compatible with the Ubuntu kernel and it managed the SSD correctly.  After their replacement by the PERC 6 / i with backup battery, all that survived a weekend stop.  Thanks for all the suggestions and help.

• How do I file NAVE with Photomerge (3-4Fotos) created open in Camera Raw?

  How do I file NAVE with Photomerge (3-4Fotos) created open in Camera Raw?

  NEF files are camera raw Nikon. You cannot create new in Photoshop or Camera Raw. You can use NEF files to create photos merged into Photoshop files. If you CC of Photoshop, you can create photos merged into Camera Raw files and then save as DNG files. However, you cannot do it with CS6. You can create files photomerged with CS6 via Bridge or Photoshop.

• How to export a file with a CMYK color profile in Lightroom?

  I try to save a picture with a CMYK color profile to send to a company that will print for me. I looked at the color profiles installed on my computer, and a certain CMYK profiles seem to be there (in/Library/Application Support / Adobe / Color / Profiles / recommended). I don't know if they should be expressly in the folder "Profiles", or if it is important that they are in a subfolder of that folder. This is on a Mac, by the way.

  The problem is, when I go to export in Lightroom, and I chose 'Other' in the color profile, I gives me any options of CMYK.

  Thanks for your help!

  Ray

  Sorry... you can't. LR does not CMYK, RGB only... you will need to Photoshop or some other app.

• MP3 link does not open a Web site using Ubuntu 14.04, window saying the file is corrupted, but it works other NVO computers very well and worked on this computer using

  Ubuntu 12.04 and upgraded to Ubuntu 14.04 and now trying to open an MP3 audio on a Web site that used to work, now I get an error message indicating that the file is corrupted. Using the Firefox browser which is updated. What now? The file opens correctly in Documents with VLC Player.

  Don't worry about this. You are today, ask questions.
  Someday, you'll be the one who gives the answers.

  Once you are sure that the problem has disappeared, please report
  your last post as solved problem.

  Good luck.