Files of transition and all the data from one system of Microsoft PC to an iMAC.

Similar Questions

• Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Erase the data on your phone will not erase the data on the sim card.

• If I remove all the data from the Web site it will also remove all my passwords?

  If I remove all the data from the Web site it will also remove all my passwords?

  It will not erase your saved in the Keychain passwords, but you need to connect back to all Web sites (like this one) that require you to log in.

• How to put all the data into one phone to another?

  Okay, so I have an iphone 5 c and I want to spend it with old iphone my mother 5 s. I want to move all the data from the 5 c to 5 s. but I don't know how to do it? I'm sure that you connect the 5 c with itunes on a computer to do. Help?

  You can do it. First of all, make sure that the 5s are deleted properly: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then you can transfer the contents of the 5 c to 5 s: transfer content from your old iOS device to your new iPhone, iPad, or iPod touch - Apple Support

• Smartphones blackBerry how to transfer all the data from my BlackBerry/Outlook to new computer

  Nice day

  I am currently using a Torch 9800 on my old Dell using Microsoft Outlook 2003.  I just bought a new Dell computer and installed Microsoft Office 2010 with Outlook.  I would like to transfer all my data from my BlackBerry Torch / Outlook to my new computer.

  Can I install BlackBerry desktop on my new computer and just sync with my flashlight or do I make a back-up to my old computer and restore the backup file to my new computer?

  Thank you.

  It depends on what everything you want moved. You can google for more information about how to transfer all your Outlook, including mail settings and all of your PIM data.

  If it's just the calendar, tasks and address book data, then if your BB has everything you want on it, then you can install BDS on the new computer and set up a synchronization one-way system your BB to Outlook to transfer everything in the new perspective. Once it is on both devices settings of two-way synchronization.

  I would like to make a backup of your BB before you do any synchronization to a new computer, just in case where you screw up the sync and removes the BB PIM data.

• Excellent loading from data / last copy takes all the data from column to single column

  I use oracle apex apex.oraclecorp.com, I set up a new page to load data for one of the table Simple (with 4 column of numeric values and varchar 1) Ex: component (VARCHAR), Q1 and Q2 & Q3 and Q4 are (NUMBER) based in columns

  In the CSV, I gave the data like this when I move the CSV file on the page "under data source to load', click Next

  COMPONENT	1ST QUARTER	1ST QUARTER	Q3	Q4
  ABCD	100	200	300	400
  DCBA	90	80	70	60

  I see all the data IS SHOWN IN THE single COLUMN: PFA screenshot

  I also tried with packaged Application: "loading samples" there in the same way

  Please let me know if I m missing something

  Thank you

  CHS

  Hello

  Looks like you need to specify the right column delimiter (comma, tab, etc.). Check which delimiter is used in your csv and make sure that you specify in the field "separator".

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• How to insert into a GLOBAL TEMPORARY TABLE and get the data from it?

  The requrement is
  Split the string ENTRY point on the base and store it in a Collection. And the values of the collection will be stored in a global temporary table. Then, I'm updating some other table based on the data from the temporary table.
  
  There is in fact no error message. But there is no data in the temporary table and also no change in the update statement
  
  First of all, I'm creatiing a global temporary table only once outside the procedure.
  
  CREATE GLOBAL TEMPORARY table GLt (data_element number)
  
  
  create or replace procedure test_proc (p_in_string VARCHAR2) is
  i the number: = 0;
  number of POS: = 0;
  CLOB lv_str: = p_in_string;
  p_delim VARCHAR2 (1): = ', ';
  
  TYPE t_array IS TABLE OF VARCHAR2 (20) INDEX directory.
  t_array channels;
  
  BEGIN
  
  -cutting of string input and store in the strings (i) collection
  
  POS: = instr (lv_str, p_delim, 1, 1);
  WHILE (pos! = 0) LOOP
  i: = i + 1;
  Strings (i): = substr(lv_str,1,pos-1);
  lv_str: = substr (lv_str, pos + 1, length (lv_str));
  POS: = instr (lv_str, p_delim, 1, 1);
  IF pos = 0 THEN
  Strings (i + 1): = lv_str;
  END IF;
  END LOOP;
  
  run immediately "drop table TWG;
  run immediately ' CREATE GLOBAL TEMPORARY table (data_element number) TWG on commit preserve rows ";
  
  FORALL i in strings.first... Strings.Last
  INSERT INTO VALUES TWG (strings (i));
  commit;
  
  Update first_tbl set PIN is "XXX" where first_col in (select data_element from TWG);.
  commit;
  
  END test_proc;
  
  Published by: cedric b on January 25, 2013 12:59

  Remove the two execute immediate line. They are wrong.

  And then use the table in your code that you created at the beginning. The name is GLT.
  And delete the first commit. This validation would empty the temporary table of GLT.

  You get an error? Or it does not work as expected?

  Also, show how you call the procedure.

  Published by: Sven w. January 25, 2013 14:45

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• Select the list box file and read the data from file

  I can list the files in the folder in the listbox

  1. I want to just list file .txt files

  2. How can I read data from the selected file (.txt)?

  I think that's what you want, enter a model in your list of files vi (for example, *.txt) and then just use File.vi text of reading by using the selected item in the list box (double click on event or value change) and use the starting for the vi records list path.  I have included a crude extract for your pleasure.

• History of the files do not save all the data

  I've been running historical files for a few days now and it doesn't save any of my content. I have a single directory that contains all of the staff. Then the subdirectories under music/pictures/documents, etc. I think that this arrangement would be ideal for her, but missing all my documents.

  Secondly, please adjust the cache size to more than 20 percent of the disk offline. I have a separate hard disk for this task and it makes no sense I don't have the option to put 100% of the space.
  Thanks in advance for your help.

  Hi Artie,.
  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you are not able to back up all the content by using the history file.

  To solve the problem with the file history, you can follow these links
  (a) how to use the file history
  http://Windows.Microsoft.com/en-GB/Windows-8/how-use-file-history

  (b) storage space: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/storage-spaces-pools

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.

• Transfer all the data from the iPhone 4 barely z3 Xperia

  Hello guys,.
  I would really appreciate if someone could help me.
  so I bought a Sony Xperia z3 today because my iPhone4 broke down. I saved most of my data on my iTunes and icloud, but I can't transfer anything because I have over my iPhone to connect to the "transfer Xperia" :-( II just can't understand. any ideas?

  You should be able to see your photos on your computer, just copy paste, and regarding the applications, you need to download it manually, because not all applications that you had with iOS will be on Android

• I need to erase all the data from my old 5 iPhone

  I bought a new 6 iPhone more. I transferred all of my 5s (32 GB, iOS 9.2.1 I don't know the speed of the processor).   Now, I want to erase all personal data on it, or maybe take it back to the factory.  I give the phone to my niece.  Currently, the 5s is still active on my Verizon carrier.

  I have been in support of Verizon, but am no where.  I came by the Apple Support page first, but the problems they had to choose, was not there.  So, I finally did here.  Please, could someone at least tell me where to find the information needed to get rid of the 5?  It would be highly appreciated.

  Thank you

  Barb M.

  Try what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Copy all the BLOBs from one table to another

  Hi all
  
  I hope that I put in the right place. I am trying to copy from one table to the other BLOBs, but were usuccessful. Here is the script that I wrote to do, but it just loaded a field saying not supported. Is there something I'm missing, I'm using the APEX 3.1.2.
  
  Thanks for your help.
  
  DECLARE
  number of v_id;
  v_document blob.
  v_filename varchar2 (200);
  v_mimetype varchar2 (200);
  
  
  
  CURSOR c_Document IS
  SELECT id, name of the document file, mimetype
  IN v_id, v_document, v_filename, v_mimetype
  
  OF CAB_APPEAL_ACTIONS
  WHEN THE DOCUMENT IS NOT NULL;
  
  BEGIN
  
  FOR r_Document in c_Document
  LOOP
  INSERT INTO CAB_APPEAL_DOCUMENTS
  (APPEAL_ACTION_ID,
  DOCUMENT,
  FILE NAME,
  MIMETYPE
  )
  VALUES
  (v_id,
  v_document,
  v_filename,
  v_mimetype
  );
  
  END LOOP;
  
  END;

  In addition, what is wrong with just...

  INSERT INTO CAB_APPEAL_DOCUMENTS (APPEAL_ACTION_ID,
                                    DOCUMENT,
                                    FILENAME,
                                    MIMETYPE)
     SELECT   id,
              document,
              filename,
              mimetype
       FROM   CAB_APPEAL_ACTIONS
      WHERE   DOCUMENT IS NOT NULL;
  

  APEX will end process page in a BEGIN block... END; block anyway.

  See you soon

  Ben

• I would like to know if we can copy the data from one scenario to another scenario for several years. See the example below

  For example, I would like to take our entry scenario Plan for FY16 and copy this data into our Long Range Planning scenario in the years 2016,2017,2018,2019,2020.

  So I know I can do this script calc to copy a year but what can do to copy several years if possible

  ESS_LOCALE English_UnitedStates.Latin1@Binary
  UPDATECALC OFF SET;
  SET CLEARUPDATESTATUS AFTER;
  
  Fix (& PlanYr)
  

  ClearData "LRP Input;

  DATACOPY "Entry Plan" to THE "LRP Input;
  "Entry plan";

  
  ENDFIX

  Yes--but with several instructions DATACOPY (one for each year of the 'target').

  You can always make your CLEARDATA in a FIX on every year, but then put the DATACOPYs after the ENDFIX.