Files Ogg plays do not correctly on Sansa Fuze

Similar Questions

• I can not connect my sansa fuze to my Vista pc. __

  I can not connect my sansa fuze to my Vista pc.  It works on XP. Apparently looking for a driver.

  Check with San Disk.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS MEDIA PLAYER PLAYS DOES NOT CORRECTLY .avi FILES

  WINDOWS MEDIA PLAYER ONLY PLAYS THE SOUND OF. AVI FILES. VIDEO IS NOT PLAYED. IAM USING WINDOWS MEDIA PLAYER 11. I SEE A RED CROSS MARK, NEXT TO THE NAME OF THE FILE IN "NOW PLAYING".

  WINDOWS MEDIA PLAYER ONLY PLAYS THE SOUND OF. AVI FILES. VIDEO IS NOT PLAYED. IAM USING WINDOWS MEDIA PLAYER 11. I SEE A RED CROSS MARK, NEXT TO THE NAME OF THE FILE IN "NOW PLAYING".

  ===========================================
  The following utility can identify the codec that you need to read files:

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html
  (to download GSpot... left click on 'The GSpot zip file' in the first paragraph)
  ... then... Download the file to your desktop / unzip the file and run it.
  No installation is required)

  Evaluation of video files and Codecs with GSpot
  http://www.windowsmoviemakers.NET/PapaJohn/68/GSpot.aspx

  Or...

  It might be worth a try to download and install
  a pack of codecs:

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  Info on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• CC2014 and PHP files Dreamweaver renders do not correctly in the browser

  My old computer is Windows 7 with XAMPP 1.8.3. I now have the new computer with Windows 8.1 and I installed XAMPP 5.6.3.

  Everything worked perfectly on my old computer set up (and still makes). I did the local Web site of tests with virtual hosts set up for my multiple sites. It was fine.

  To the best of my knowledge, in the implementation of my new computer, I followed the same XAMPP set up and make the same changes to virtual hosting (1) file hosts (Windows/System32/Drivers/etc/host); (2) httpd.conf (xampp/apache/httpd.conf); and (3) httpd - vhosts.conf (xampp/apache/conf/extra/httpd-vhosts.conf).

  On the new computer Windows 8.1, XAMPP works very well. Apache runs on Port 80 443 and PID 1924 / MySQL running on Port 3306 and 2100 PID.

  I don't get the error messages. My "site1" and my "site2" servernames (etc.) pull up the correct Web sites...

  BUT - the website does not display well at all. It seems that it does not render the php "include" that I have in my php Web pages. The sites look good online so that there may be something wrong with the files on my laptop. (They are the same files php of my old computer Web site.) An example of a Web site is: "www.dm-webcreation.com"... It is in line, but appear badly on my new server local computer test.

  This new version of the XAMPP uses a different configuration?

  Live Preview without problem works... but when I view in a browser, it does not correctly.

  Can someone help me with this?

  Hey thanks for the help.

  I Uncomment the "LoadModule" that you referenced. He then started work in Chrome...

  But... not in Internet Explorer...

  Accidentally, I discovered a setting in Internet Explorer, which was not aware of... under "Compatibility view settings" - I unchecked the box "display Intranet Sites in Compatibility View '... I had no idea there was such a framework (I wasn't aware that look at one of my sites them was referred to as a 'intranet sites'). Once I unchecked, IE started working perfectly...

  Once again, thank you for your help!

  David

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Video not playing does not correctly in Internet Explorer.

  my download speed is always more 5.5 Mbps and I have 2 gig ram, but no video streaming is still jerky. Netflix, hulu, etc. I have the latest version of flash as well. all boards

  Hi James,

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. don't you make changes to the computer before the show?
  2. do you get an error message?
  3. you use Internet Explorer to access the Web sites?
  4. What is the brand and model of the computer?
   
  Method 1:
  Run the fixit.
  Playing video files crashes or blocking Internet Explorer - Windows
  http://support.Microsoft.com/mats/video_freezes_or_crashes/
   
  Method 2:
  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294#top
   
  Method 3:

  Update the display drivers.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Hope this solves the problem.

• Edition of EI sequences play does not correctly in PPro CS4

  First - I am a novice.

  I have captured images of a Canon GL2 (photographed on the Auto settings) in Premiere Pro CS4, who was murdered in front of a blue screen. In the timeline panel, I choose the blue screen images (avi file), to backgroundn (jpg) and audio photo, right click and choose the function after Effects Composition to create a DynamicLink. In AE, use KeyLight to correct the background. Then I clicked on save. In the body, the link is updated, but when I play it, the video moves not with the audio. The video is much delayed in moving. How can I fix? The rate is the same in both pre and post AE - 29.97 FPS.

  Thank you-

  Amy

  Set up your program on quality monitor. Pressing ENTER when the timeline is active to achieve the same effect as the sequence/Render.

• path of the image file that links do not correctly in the executable file

  I have a jpeg file in a project that I'm building which is not loading when run as an executable file.  The executable seems to be looking in the same directory that the image file was originally instead of the support folder where the image is deployed.  On another machine, the exe will look for the image in the directory, that were found on my machine.  When I drag the image file of the project on the block diagram Explorer, it creates a constant path of file indicates where the file is located on my machine.  This does not seem to update when I build the exe.  The image file is included in the source files.  Any help is appreciated!

  A constant path is... Yes indeed constant! It's not automatically change whenever someone might move the file too, whatever his imagination made her do. He does not maintain a link to the actual file it could use later to detect that the file has been moved elsewhere. In fact Windows has quite such a mechanism.

  So if you want to access an external file to your executable application to first do a correct path when running. My approach is to put in a directory from a VI file that I put in my application. Then in this VI use the way of getting current VI, band name the VI of it and add the location relative to the other file to it.

  If you do something like this:

  The project directory

  Directory of the utility

  My Location.vi

  Data directory

  MyResource.jpg

  in system development, then:

  The application directory

  MyApplication.exe

  Data directory

  MyResource.jpg

  in the application of the construction.

  With this provision, it doesn't matter even if you use the old format of executable LabVIEW 8.x or the new default format since LabVIEW 2009.

  My Location.vi is just a VI that takes a relative path in the entry (in this case "... / directory/MyResource.jpg data" called the "Current path to VI" node, use 'Band path' to remove the name of VI, then build to add this entry path, and this is!.)

• *.psd file icons displayed does not correctly after the CC 2014 update

  I just installed the new version of 2014 of some applications like Photoshop, Illustrator Adobe, InDesign and so on.

  The only problem was caused by Photoshop.

  First of all, all my default manager lost *.psd files, they were empty and no software was set to open.

  And then when I chose 2014 CC Photoshop as Manager default *.psd THIS happened:

  http://i.imgur.com/iFv9ngR.PNG

  as you can see the icon of the illustrator file is normal, but the *.psd file looks like Photoshop.exe icon and not the *.psd file icon.

  any ideas how to fix? (already tried to empty the cache icon)

  OS: Win 8.1 Pro WMC Update 1 (just making it clear if anyway, it makes a difference)

  I had this problem since CC came out last year and I came across a solution yesterday (finally!)

  This implies external Download program 3rd party, but now I have the correct icons, so I'm pretty happy.

  Here's what I did, if it helps:

  (1) download Default Programs editor this link here.

  2) once you have extracted the .zip file open the .exe and we go.

  (3) this is the first screen, you get...

  

  4) click on the first item "File Type settings" and you get this:

  

  5) click on 'icon '.

  (6) for this example I'll change a file, InDesign icon as I already fixed the Photoshop those. An excerpt from the next screen with the white ghost icon InDesign and yes it works if you have the icon default .exe showing instead of a blank white icon.

  

  7) type in the search box the file extension, you need. In this case because I'm changing the InDesign file I want it to be .indd but you can use for Photoshop .psd or .ai to Illustrator etc etc.

  

  (8) now, the program will ask what icon you want. What you need to do is click Browse and browse to the location of the default for the program .exe you change who will be in the folder Program Files. In this case my location is C:\Program Files\Adobe\Adobe InDesign CC 2014\InDesign.exe

  Once you open that default Programs editor will show the full icon set for this program, as you can see below.

  

  (9) simply select the one you want and click OK. Click the arrow next to the Save icon, and then choose Save in the registry and then BINGO!

  (10) GLANCE! He has worked.

  

  Just need to sort all my other out now, but he receives a helping hand to the top of me!

• Sticky transitions in project final burn / files sometimes plays is not his

  I have a project that is 30 minutes in length, 2 soundtracks sometimes and probably 15 transitions/titles.  They looked OK during playback, but some don't turn out so well on DVD burn - it was as though the transition took some framing and "stuck" on them - or he flashed at the end - also some of the soundtracks provided with PRE would not play at different times during playback, so I removed them and put back them in and they seem to work.  I got a good burn, so I recorded as 'action' but then had problems with this sear then with some of the transitions as well as with some of the soundtracks.  Any suggestions?  Eric

  Lots of fun, Mr. Fishmor! And you did a great job of taking pictures of these fireworks!

• Videos, play does not correctly in Safari

  Some videos on my iMac (OS10.9.5, running Safari 9.0.2) play more normally, the others are playing very well. It's a tossup. This is what happens - sometimes the promo ad and the launch of video playing at the same time, then I heard the two audios, other times they begin to put into memory buffer can stop and play any. I have the latest version of Flash player installed and active. Any ideas?

  Problem solved. And that's called "Safari Power Saver" that prevented loading web videos ball and play immediately. When I unchecked this preference, videos loaded and played automatically.

• Music plays does not correctly

  I created my web page to listen to the music from the opening. Songs to start playing when the web page opens but stops playing a few seconds after the start of itv. Nancy O said it could be a problem with my song which is a record studio in mp3 format output, but I tried it with a number of CD recordings market, but it does the same thing with all the records?

  It seems to work fine now on your home page.

• Windows does not start with Sansa Fuze plugged

  That's all.  The machine hangs at the bios screen indefinitely until I unplug the "rocket".  I checked my CMOS, the "rocket" is not listed as device startup.  There is no "USB Legacy" option in the CMOS (as I read to check).  Reader priorities are defined on my first hard drive and CDROM as the second, all the others 'off '.  I can't enter CMOS with the trendy "rocket".  Otherwise, the machine is very good.

  I don't know, disconnect the "rocket" before starting, but I would like to have the "rocket" moored permanently to the machine via a USB docking station.  I don't want to remove the "rocket" whenever I start my computer.  (It's certainly a hardware problem, not Windows because there is regarding)

  Any ideas?

  Thank you!

  It looks like although there is no legacy usb option in your bios something it is always the origin of the problem. You can check to see if there is an update of the bios available for your motherboard that can solve the problem, but it's kind of a long shot. you see the problem with any other USB mass storage device? as you use the MTP or MSC mode on the "rocket"? If you have not tried both I could and see if you get the same result.

• check if a loaded sound file still plays

  Is it possible in AS3 to determine if a loaded sound file still plays or not?  I need to start an animation, a sound at startup and stop the animation when the sound is done playing.

  Thank you

  You can determine (to a reasonable extent) when a sound starts by using the open event of the sound class and you determine when a sound finishes the game using the soundchannel class soundcomplete event.

• Flash does not correctly install in the directory Plugins of Firefox 3. Help!

  Hello
  
  I had a real bear trying to get flash works with firefox 3. For awhile, I've been runing Firefox 2 and Firefox 3 beta/RC side by side (installed in different directories, of course), but now that Firefox 3 is out, I uninstalled Firefox 2 and do a fresh install of Firefox 3. However, when I try to run the Flash Player installer, it lists the "output folder" as "C:\WINDOWS\system32\Macromed\Flash" and does not affect the directory of the Firefox plugin - which of course means that Firefox does not know that the plugin is here.
  
  I don't know if it's the default behavior and some files are copied but not correctly, or if the output folder is simply false, but if I manually copy the contents of the C:\windows\system32\macromed folder in the plugins directory, flash works in Firefox.
  
  I need the installer works well. Can someone help me with this?
  
  Thanks in advance.

  OK, I found the problem: there are incorrect permissions in the registry. The Administrator's guide led me to this page: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19148&sliceId=2. I discovered the HKLM/Software/Macromedia registry key (as well as two key in HKLM/Software/Mozilla, Firefox and ' HKLM/Software/Mozilla Plugins') was inaccessible to the administrator; I had to take possession of the key and replace the permissions.

  So the problem (get flash to install correctly) is now fixed. I guess the problem didn't rear its head with older versions of flash, because they have installed the flash plugin in the directory plugins of firefox rather than rely on the registry.

  Thanks for all your help!