Could not import all of a sudden

Similar Questions

• Could not import all of the files in Lightroom

  I've been using Lightroom since Beta 3, but never meet this problem before. He apparently don't ingest photos. (I usually ingest RAW and convert to .dng but it won't let me even copy without converting them to .dng.)

  I tried two readers of different cards, two different cards, with pictures (one CFDC, a SDHC), most copied photos of CF card on my desk and tried to eat there. I also have an auto import to my desktop folder (to put in the files scanned my scanner) will not import. :-( It's used to work like a charm.

  I use LR v3.4.1 on a Mac Pro with 14 GB of RAM. I ran Apple disk First Aid, as well as the latest version of Diskwarrior on this hard drive: no problems found.

  The photos can be viewed on both cameras, they came. I can see them in Lightroom before I attempt ingestion.

  The error message that appears when I click on to ingest is: 'some import operations was made' and inside this window: 'the following files were not imported because they could not be read. (466),"then it shows the folder structure. All of the photos I am trying to import are RAW files, but those sent to my folder to auto import on the desktop of my scanner was RAW, tiff and jpeg. None would have the auto import. :-(

  Any solution for me?

  Only, I have solved my problem.  For reasons that I don't understand, I didn't write permissions to the folder where to put my LR library.

  To solve this (Mac)-, I selected the folder that is located at the top of my directory structure of library (in fact - at the top of the directory tree) and made a command-i.

  From there on, I opened the "sharing & permissions" section and made sure that I have and reading and writing.  Then, I selected "apply to the elements included...". "in the menu of gear below and now, everything is good.

  I hope this helps others who run on this issue.

  Steve

• Could not import all of the PowerPoint slides

  I created a PPT presentation with 117 slides I want to import into Captivate 3. However, whenever I try to import slides PPT in Captivate file, I see that Captivate detects the first 77 slides of the presentation (40 slides are still missing). I tried to cut the PPT file into several smaller files and import each of these files separately, but whenever I get to the 77th slide, Captivate cannot import slides more (when I go to file > import > PowerPoint slides... and select the desired PPT file, it shows only a blank slide even if the PPT file in question has several slides in there).
  
  How can I get Captivate to detect all 117 slides of my PPT presentation?

  I found the answer: in the pane left of your PPT presentation, when you click on 'Preview', you can see that each slide has its own name. most of the slides have no names at all (the space next to them is just empty), however some slides are named after a specific text box, that you can find on the slide itself. It turns out the slides that Captivate has not detected that all had exactly the same name (as you might see in the section overview in the left of your presentation as pane described above). I simply deleted the names in order to could be "no-name" slides as all other slides in the presentation. It also automatically removed from the text box related on those slides, but I simply replaced those with the standard toolbar text boxes.

  Summary: All the slides have different names (or blank) as seen from the Plan of your presentation for Captivate tab import correctly.

• Could not import all the Favorites in IE 8

  Recently experienced the premature death of all new hard drive, but was able to save the files including the IE Favorites on a flash drive.  Now, try to import the Favorites in IE 8 (there are 1 500 +, separated in subfolders).  Export the main folder on the flash drive was not a problem.  How can I import the entire lot without doing each one individually?

  http://support.Microsoft.com/default.aspx/KB/211089/en-us

  Internet Explore 7

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Add to Favorites, and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Export Favorites, and then click Next.
  4. Click Favorites , and then click Next.
  5. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  6. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  7. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  8. Click Finish.

  Internet explore 8

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click export to a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  5. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  6. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  7. Click export.
  8. Click Finish.
  Back to top

  Import Import Favorites to Internet Explorer 6 and earlier versions

  Use the Bookmarks Converter tool to import the Bookmark.htm file into Internet Explorer on Windows 95, Windows 98, Windows 98 Second edition, Windows Millennium Edition, Windows NT 4.0, or Windows 2000.

  Import Favorites to Internet Explorer 7

  1. In Internet Explorer 7, click Add to Favorites , and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Import Favoritesand then click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next. Or, click Browse, and then click Next to accept the default value.

  4. Select the folder where you want to place the imported bookmarks, and then click Next.
  5. Click Finish.

  Import Favorites from Internet Explorer 8

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click import from a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next.
  5. Select the folder where you want to place the imported bookmarks, and then click import.
  6. Click Finish.

  See you soon.

  Mick Murphy - Microsoft partner

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• Could not initialize all required WMI Classes

  My programs that rely on WMI function do not work properly. When I checked the WMI settings (went to Device Manager > WMI Control > properties), I get the following error:

  Could not initialize all required WMI classes.
  
  
  Win32_Processor: Win32: the system cannot find the specified file.
  Win32_WMISetting: success
  Security information: success
  Win32_OperatingSystem: The system cannot find the specified file.
  I already tried to re-enroll the WMI, but that doesn't seem to do the trick. I also confirmed that the processor appears in Device Manager. Any thoughts? Any help would be appreciated.

  Hi Mattabedi,

  Thanks for posting your query in the Microsoft Community Forums.

  Help me with more information.

  1 are. what program you referring?

  2 is specific to the program the issue?

  You can run WMIdiag tool and check if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=7684

  See also:

  http://msdn.Microsoft.com/en-us/library/aa394603 (vs.85) .aspx

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Could not reconnect all network drives

  My laptop is getting the message "Could not reconnect all network drives", at startup. I'm running Windows XP, service pack 3. I have a 'Z' allocated network drive, which is marked 'memory_card '.

  Must this drive be connected?

  If so, what are the steps.

  When I try to open this network drive, I get the message "an error has occurred during reconnection 'Z' (: to \\HP(serial number) \memory_card'."

  Thank you

  All of this makes sense now.

  Thanks for your help and happy new year!

  C1

• Could not reconnect all network drives in Vista...

  On startup, I get the message, form the notification area: "Could not reconnect all network drives.".  How to connect readers.  I have an Epson printer connected.

  Hello

  (1) what firewall are you using?

  You are connected to a Modem/Router? If so have them turn it off for 30 seconds and turn it back on.

  Let us know if that helps.

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Cannot import songs in Windows Movie Maker, we get an error "could not import.

  Original title: wrong to import the music after hard drive now

  I downloaded the songs from Amazon in the past and import it onto a movie from Movie Maker without problem.  I had to put in a new hard drive on my computer and now I cannot import new songs.  Can I use the old songs that I downloaded (I recorded on a USB key), but when I try to add new songs I get an error message "could not import.  Any ideas what I am doing wrong?

  Hi SHennessey,

  (1) what is the complete error message you receive?

  (2) what is the format of the file?

  Method 1: For files that can be imported into Windows Movie Maker, see the link below.

  Can what types of files I import?

  Method 2: To check your video filter settings, follow the steps mentioned below

  (a) in Windows Movie Maker go to the Tools menu

  (b) click on Optionsand then click the compatibility tab

  Now, check if the problem persists

  See the link below

  Problems with importing files into Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/problems-importing-files-into-Windows-Movie-Maker

• copy - paste does not work all of a sudden

  copy paste does not work all of a sudden. I did system restore has do updates again and it still does not work.

  then I did this thing running and it might fix something and I do not understand what are the new instructions all about - that's why people buy Mac?

  CTRL + c and ctrl + v work?

  Try this

  (1) Start-> Run-> Services.msc

  2) look for Desktop Window Manager Session Manager.

  (3) restart the Service

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• Could not import title animation After effects Bridge

  In Adobe Bridge, I click on an animation effect I like, and there's a window saying to burst: after effects error: could not import the random word shuffle in.ffx: unsupported file type or extension (0::1)

  If anyone is familiar on how to solve the problem, it would be very useful!

  Geneviève

  We need the details of the version and the operating system. If you use 13.8 - do you have installed the update on 13.8.1?

  After Effects 2015.3 CC (13.8.1) corrections update is now available. Creative blog Cloud by Adobe