Films taking on average 11 times the length of the sequence export.

Similar Questions

• How can I change the sequence exported to iMovie?

  When I finished making the video and it has exported, some errors found only. How can I change the sequence exported in the application iMovie editing new, mainly texts?

  Just open the project that you exported from iMovie, make the changes necessary, then export again.  (Sod / Murphy's law always ensures that errors found only after export)

  Geoff.

• When the sequence of process template client file is loaded for execution?

  As part of a custom process template I've created, I would like to make a few changes in the sequence of the client before file called by the process template. These changes will be then be restored after the loop finishes USE (I'm changing the sequential model).

  Another thread, I discovered that TestStand sequences cannot be edited structurally once they have been loaded for execution. My question is: what is client sequence template process ' for execution "?

  After some research, I discovered that the sequence of the client file is not locked to prevent changes to the sequence editor until the "Reminder of the main sequence" sequence step call runs in the model process entry point. At this stage, the sequence of the client file is loaded dynamically as the module at this stage.

  However, before this point, there are two places that the file of the client's sequence is used, and I want to assure you that they don't 'load the customer file for execution.  The Runstate.ProcessModelClient property is a reference to the object the client file SequenceFile and exist as soon as the entry point is called. In addition, the engine must know about the sequence of the client file to correctly call reminders of process model. Do any of these things make the movie of 'responsible for performance customer file?

  It boils down to this: can I do safely from the structural changes to my file of sequence of the client during the ProcessSetup and ProcessCleanup?

  According to the information I found in another post (see the comments of Eric_Crank on page 2), it is allowed. However, in this case customers were only make changes to the property Data of the RunState.ProcessModelClient. I want to assure you that I can use the TestStand API on the reference too.

  Also, just FYI, I got this works. I can add steps to the sequence MainSequence customer sequence file of the group stage of installation of the point of entry of the process model via the API TestStand. I ask here if make sure that it is a safe thing to do, and that there is nothing I plan not to.

  Thank you.

  Josh,

  If your sequence allows the option "optimize no concave calls this sequence", the first time the sequence run TestStand stores a copy of the execution of the sequence in a cache associated with running. As long as the sequence is in this cache you can not change, and TestStand considers that the sequence for 'run' file (see the SequenceFile.IsExecuting property). You cannot unload 'enforcement' sequence files (see SequenceFile.CanUnload). Sequences remain in the cache until it is closed. There is no way for you to remove the sequences of this cache, but you can prevent them to be added to the cache by turning off the option "optimize... ». Disabling this option should have no impact on the performance that you call the sequence only once.

  -Erik

• Change the sequence directly after loading sequences

  Hello

  I intend to write a sort of Profiler to see what stage most testtime consumtion.

  That's why I use engine callbacks SequenceFilePreStep and SequenceFilePostStep.

  Whenever a step in order is executed the SequenceFilePreStep generates a timestamp and after executing the step of the SequenceFilePostStep generates a different timestamp. Two timestamps can be used to estimate how long this step has been performed.

  I use several different sequence files (for example a gall for characteristic sequence a sequence one to feature B and so on).

  A sequence file can be called (charged) many times the sequence of higher level or any other file of sequence file.

  My problem is that I don't want to edit each file sequence. Profiling should be initited automatically.

  My idea is that the process template will add the mentioned subsequences above in each sequence file that is used during the execution of the testplan.

  No idea how to implement that?  As far as I've seen there is no ProcessModel callback that is called when loading a sequence file, is it not?

  Thank you very much

  Thorsten

  I forgot to mention, I'm currently using Teststand 3.1, but intend to change to 4.x

  No, you wouldn't.  Read the description carefully.  Also, I tested it by adding the process template.  You can do the same thing and just put a simple message popup in there.  The popup message fires once for each stage of your Client's sequence.

  Kind regards

• Pavilion 17-F001dx: 'Windows 8 using 100% of the HARD drives with high average response time and low write speed '.

  

  It turns out that it is a pretty known issue windows 8.1 users infestation since at least 2013 and there is not a simple fix, then it cannot be * completely * lack of hp. but I've had two of these laptops, both the same model, one needing to be returned and exchanged for a problem absolutely no report with (hardware failure: ethernet port does not work with lights taped). Both are renovated. Both have been extreemly slow and unresponsive even compared to the lower Brazos powered by the laptop that I had before, but I recently decided to investigate why.

  So if there is something specific HP going on here, I hope that there is a simple fix. My average response time went upward as well more than a minute (> 60, 000ms), so that I'm an aberrant case here against this problem of reactivity/band bandwidth hardrive typical windows 8.1.

  Edit: there is a case with another HP pavilion laptop (intel powered, so there may be a problem of storage driver intel described in the first link) being much worse.

  Did not want to resort to that, but,.
  Going to a new facility to clean up an image of Windows Pro 8.1 from DreamSpark for my school.

  Disappointed by the lack of response. Given the odd subdomain name (h30434), I'm wondering if this forum has been abandoned.

• I made a new music video for a song, and the music is not in time with the film, how I put in time?

  I made a new music video for a song, and the music is not in time with the film, how I put in time?
  Oh and I'm using WIndows Movie Maker. One.

  Please repost in Windows Live Solution Center.
  Forum on Windows Live Movie maker:
  http://windowslivehelp.com/forums.aspx?ProductID=5

• How to calculate average daily time of the Start_Time and End_Time fields

  I am using ORACLE 11 G on Red Hat Linux, I have calculated the average daily time of multiple transactions for each day. The followign is the querry that shows the difference between the fields end_time start_ time and time.

  Select TRIP_LOAD_STARTED AS START_TIME, TRIP_LOAD_ENDED'RE END_TIME.

  ceil ((TRIP_LOAD_EDDT-TRIP_LOAD_STDT) * 1440) "time difference Bw Start and End.
  of GATE2GATE_ACTIVITY_VW
  Where TRIP_LOAD_STARTED > = February 1, 14 '
  AND TRIP_LOAD_ENDED < 3 February 14 '
  ORDER BY TRIP_LOAD_STARTED;

  The querry above gives me the result as follows:

  Start_Time End_Time time Diff bw begins and ends

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 18

  1 FEBRUARY 14 FEBRUARY 1, 14 12

  FEBRUARY 2, 14 2 FEBRUARY 14 29

  FEBRUARY 2, 14 2 FEBRUARY 14 29

  FEBRUARY 2, 14 2 FEBRUARY 14 29

  FEBRUARY 2, 14 2 FEBRUARY 14 29

  FEBRUARY 2 FEBRUARY 2, 14 14 19

  FEBRUARY 2 FEBRUARY 2, 14 14 19

  FEBRUARY 2 FEBRUARY 2, 14 14 19

  
  

  It shows two dates for which I want to get the average duration in minutes for each group to date by the start time.

  
  

  I use the following querry that probably gives me the average two days mentioned in where clause
  

  
  

  Select the floor (avg ((TRIP_LOAD_STARTED-TRIP_LOAD_ENDED) * 1440)) 'average of Minutes of time.

  of gate2gate_activity_vw

  Where TRIP_LOAD_STDT > = February 1, 14 '

  AND TRIP_LOAD_STDT < 3 February 14 ';

  Average duration in Minutes

  29

  Can someone help me to a daily average time calculated between start and end.

  Kind regards

  mhamidch

  Is that what you want:

  SELECT trunc (TRIP_LOAD_STARTED), trunc (TRIP_LOAD_ENDED).

  floor (avg (ceil ((TRIP_LOAD_ENDED-TRIP_LOAD_STARTED) * 1440))) Diff

  OF GATE2GATE_ACTIVITY_VW

  WHERE TRIP_LOAD_STARTED > = to_date('01/FEB/2014','dd/MON-YYYY')

  AND TRIP_LOAD_ENDED<>

  Trunc GROUP (TRIP_LOAD_STARTED), trunc (TRIP_LOAD_ENDED)

  Always the example of create table and insert statements to verify the results and use the to_date with date format function.

  Post edited by: Elya

• HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  HI everyone, I paid almost 10 days ago, my supcripcion to plan for all the app elements, and after u date of my latest plan, any program is runing, always appear, your time taking, is late, please by the app with my adobe ID works correctly?

  Photoshop Elements and Premiere Elements are NOT part of the cloud... you buy a serial number, not a subscription, and you enter the serial number during installation

  If you don't want to say things, read below

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Windows 8, taking a lot of time at the stop

  Hello

  I use Windows 8 in my laptop Sony vaio SVE15136, it takes a long time to stop. Please help me solve this problem

  Hello

  I use Windows 8 in my laptop Sony vaio SVE15136, it takes a long time to stop. Please help me solve this problem

  I would like to try normal these steps.

  Scan if there is no virus / malware then try the steps below.

  1 remove temporary files: start > run > type "Temp". Press ENTER.

  delete all the files/folders that are stored (ensure that all applications are closed)

  2 remove the local temporary files: start > run > Type "%Temp%". Press ENTER.

  delete all the files/folders that are stored (ensure that all applications are closed)

  3. delete prefetch files.

  Start > run > type "prefetch". Press ENTER.

  delete all the files/folders that are stored (ensure that all applications are closed)

  Also, I would reset the Internet Explorer settings to default and remove 3rd party addons that are not necessary.

  4. increase virtual memory to 2 times the size of the real memory.

  5. If none of these work. I would recreate user profile with elevated (Admin) access.

  See you soon!

  Love Alison

• Average read time IC Agent

  All,

  I use the IC agent seriously for the first time.  Just lie be of the opinion that all other settings other than the average playing time is not collected.

  Host > Hostname > physical disks > sda > average length of reading

  Other measures are collected very well. How the IC agent collects data so that I can begin to solve the problems.

  CentOS 6.2 x 64 with flgam last 5.6.7 and IC installed locally running as root.

  More physical measures of disc are from the file/proc/diskstats. Our IC dashboards visualize the logical disk data. The http://edocs.quest.com/foglight/567/doc/Cartridge/InfrastructureCartridge/Reference.003.4.php#424072 table gives a summary of what parameters are available for each type of OS. When I look at one of my test systems, I also see the values '0' for ' / '-I don't know if this is a defect, we can check it out. Other readers on the same host seem to bring their good values. If there are specific values that you expect or need I have to turn to our dev team to answer specific questions about what might happen or why some settings may not be available.

• How to change the sequence of films in iMovie Theater

  By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?

  HI, breeaz,

  I have not found a way to change the sequence of films shown in the movie screen.

  If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster

  in the alphabetical order in archival records.   I was not able to manually rearrange it.   They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie.  In General, I'd like to make changes to the structure of iMovie in the finder.  It can cause serious problems.

  Best,

  Rich

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• calculation of the average value of the sorted data and polar route drawing

  Hello

  I did a VI that calculates the average value of the wind rotor/speed-ratio in the sections of 30 degrees (wind direction). He also called the polar plot of calculated data. Everything works, but I would like to make more detailed calculations and drawings, by increasing the resolution to 1 degree, or...

  Problem is VI, I did, is not easy on a large scale. At the moment, I have 12 parallel structures of switch-box to calculate the average value and build the array function to collect data calculated for Polar plot to draw the image in real time. I know it's probably the worst way to do it, but since I have done a few things with LV, it was the only way I managed to do what I wanted.

  Now, if I continue in same way to reach my goal, I have to create 360 Parallels switch-case structures... that are crazy.

  Something like the calculation of the average of the table or matrix (zero/empty values should not be calculated on average) inside the loop or similar way would probably be the best solution.

  So, polar plot drawing is not a problem, but creating a reasonalbe average metering system is. Any ideas?

  I would also like to rotare northward to the top (0 deg), and degrees of increase in a clockwise direction on polar ground dial plate (as on the compass).

  VI on the attachment. (simplified version of the complete system)

  I have signals:

  -Wind speed

  -wind direction

  -Rotor speed

  I want to:

  -calculate the average value of the speed of the wind / rotor - ratio in sections (5 degrees, 1 degree)

  -Draw a polar path of the wind rotor/speed-ratio of averages in propotion of wind direction

  I'm using LabView 2009

  Thank you very much.

  It is closer to what you're looking for?

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But i

  Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.

  If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.

  As a fundamental step. Leave the creative Cloud desktop application.

  Delete the contents of the Temp folder:

  Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.

  Please press Windows + R and you will get a command window run, get hit and type %temp%.

  Delete all the content inside the temp folder.

  
  

  
  Then try again to install application InDesign CC again.

  Just in case, if you are still having the same issue.

  Creative application cloud thus released, do not close it.

  Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.

  Then leave Creative Cloud application and try to install.