Animations work only not for sweeping three-fingered until mission control

Similar Questions

• Animation work is not for card games

  After installation of Service Pack 2 of unsucessfully for Spider Solitaire, solitaire and hearts animation does not work. You have to keep clicking on the maps to see and they disappear until clicking on them again.

  Hello KoryG,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  You can set the level of difficulty and set other game options in the Options dialog box.

  1. Click to open the games.
  2. Double-click Spider Solitaire.
     If Spider Solitaire is not available, you may need to install the game. For more information about installing Windows features, see turn Windows features turn on or off.
  3. Click the game menu, and then click Options.
  4. Select the check boxes for the options you want to enable and then click OK.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Shift-click eyedropper trick works only not for me

  I would like to have knowledge of Deke McClelland of Illustrator, but I'm only learning...

  He used the Eyedropper to copy just the #1 path #2 path gradient fill (not the shot!)

  Cool!   So, I tried...

  1 created 2 paths - path #1 = blank/outline, path #2 = empty/striped

  2 apply a gradient to #1 path (so now gradient-filled/contour).

  3. made sure 'fill' is selected in the color Panel.

  4 selected path #2 (still empty/rubbed).

  5 activate the eyedropper.

  6 shift - click on the eyedropper over sketch of the #1 path.

  For him, the gradient of the path #1 path immediately fill filled #2.

  For me, the #1 trail gradient fill is now displayed in the color Panel, but path #2 remained vacant.

  I know that I can copy fill + race to the path #1 path #2 with the click of rays of the pipette, but what escapes me in the Tower of his shift-click?

  (I've checked everything in the van of the pipette and apply options)

  Try these settings of the pipette. I need to have two peaks upwards and applies to offshore. Did not work with great efficiency to race on.

  

  RESULT:

  

• Xbox 360 controller triggers work only not for pc

  I recently brought a xbox 360 controller to my pc all the buttons seem to work fine execpt triggers, they work with games like halo 1 havnt tested too many other games tho
  He came with the instillatoin disk but still do not work the triggers that bothers me really because I could have made a controller at half price with style ps2 but I perfer the 360 setup
  so, it would be great if someone can help me solve this problem and sorry for the bad catigory

  Stick with your new thread in Vista/Gaming forum: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/8d7a3ddf-ebee-4768-b69e-ccc37787be45

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Find and replace works only not for files in folders

  CC of Dreamweaver (version 13.2) find and replace does not work for 'folder '.... ', "Selected files to the Site" and "current Local Site together".  Works great for open files. Older versions worked fine.  What I am doing wrong?

  Clear your cache.

  Clear Cache corrupted in DW

  http://forums.Adobe.com/thread/494811

  Nancy O.

• mailto works only not for Android smart phones

  Hi all

  I'm developing a couple of websites with Muse and the mailto link does not work on Android phones. When I click on the email link, I get the error:

  The webpage at mailto: [email protected] cannot be loaded because:

  NET::ERR_UNKNOWN_URL_SCHEME

  Is this common? Works for iOS, Mac and Windows, so a little surprised!

  Cheers, Paul

  Hello

  I tried to recreate the same thing at my end of presentation both phone and desktop computer and checked on my Android phone, and it worked fine with no errors.

  Can you please share the URL in question with us so that we can look at it codes?

  Concerning

  Vivek

• Adobe AIR for Android as3 codes work only not for this one project

  I am using the accelerometer in my flash game, which works for all the other projects I'm trying, but for some reason any on a project if I try to use it I get, using the same code that I've used before, such as this one.

  1046: type was not found or is not a constant of compilation: accelerometer.

  1180: call to a method may be undefined, accelerometer.

  It is a quite old file, not if old, then, are there files I have to add to make it work or I need to change the settings? It's very frustrating, I don't know what the problem might be. Can someone help me?

  The error message indicates it does not find the class.  Make sure you import it:

  import flash.sensors.Accelerometer;

• Why animations work only not on Safari?

  I tested on Chrome and works well, but not in Safari 6.0.5

  Here is the URL http://pierosalardi.BusinessCatalyst.com

  Thank you

  If you have seenig that after July 3, I have all ready pulled out the effect of movement of scrolling in the Muse that was causing the problem. After a lot of testing on board, I discovered that Edge was not the problem. But what gives an oam movement of scrolling effect file in Muse, Safari, for some reason, was not working.

• < cfqueryparam with null attribute works only not for me >

  Using SQL Server 2005 and CF801.  I have a field in my table defined as (int, null).  In my .cfc CF function.

  < name cffunction = "createReference" access = "remote" returntype = index 'string' = 'add a reference unit.  The success of ReferenceID back on return error message. ">

  < cfargument = "intsteam_cap_mwe" type name 'digital' = required = "no" default = "0" >

  < name cfquery = "insertReferenceData" datasource = "#application. DSN #">"

  INSERT INTO units

  (

  SteamCapacity_MWe)

  Values

  (

  < cfqueryparam value = "" #arguments.intsteam_cap_mwe # "cfsqltype ="cf_sql_integer"= null" #YesNoFormat (NO len (trim (arguments.intsteam_cap_mwe))) #">"

  )

  < / cfquery >

  < / cffunction >

  However, it gives an error "INTSTEAM_CAP_MWE the argument passed to the function createReference isn't digital type."

  In my old code, I used < cfif to test if the value is not numeric, then assigning a value of 0.  This method works.  However, I have so many fields and many < cfif s so I would use the < cfqueryparam > NULL attribute. In the code above, it's just one of the many areas inside my cffunction.

  Help, please!

  Thank you.

  me1019 wrote:

  In my form, I'm not fill this field as a test for the . I thought that this will take care of this situation.

  Nope. Even if you leave the text box empty, still defined sound. If you pass an empty string as Steve.  An empty string is not a number. If your function is complaining because you have already told him to expect a number:

  type = "numeric" required = "no" default = "0" >

  You either have to force the value to be digital, such as use val() or change the type argument.

• Captivate 5 Advanced answer to poll option works only not for me

  I use Captivate 5 and have a series of 6 questions in the survey as below:

  

  Which, according to me, I put in place, if they choose or a or b, he has to jump to slide 6 (i.e. the next slide) does.

  If they choose c) vegetarian - it says on the answer advanced options jump to slide 8 vegetarian (which is another drag several answer questions "poll"), but it isn't, yet, he climbs to the next slide.

  All my questions are asked, I try to learn more about my clients and wanted to take them through other questions based on what response they provide.

  In the Quiz properties box, where it says Action, I put it in place for this slide as 'Continue', because nothing else seems to help.

  Any suggestions as to why it does not work as I want, I spent 3 days trying to find an answer and trying different ways to do this, so your help is very appreciated.

  Lilybiri done a lot of this and messages often enough: http://lilybiri.posterous.com/tag/quiz

• hash function works only not for me

  I tried to figure this out all day, and I can't understand what I'm doing wrong.
  
  I'm trying to get this password hash example works if I can use it on an application I am building. For some reason, no matter what I did, I had either an error, or no error, but the encryption did not.
  
  I realized that I had not named the form, so I did it, which resulted in one) no error b) no message 'username or password is not valid' - and c) no message "password is valid".
  Passwords are encoded in hexadecimal.
  
  Can you see what I could do wrong?
  

  Well - it turns out that 'someone' is me :) I had already visited this page:

  http://www.petefreitag.com/item/270.cfm

  previously, but it didn't occur to me that I might need to regenerate the hash values (and Yes, it * is * need to be stored in the table - hash values, otherwise why encrypt? it's all here for a common sense to watch). So I tried a couple, and there is nothing wrong with my code - it worked! I just made a small doc cfm like this:

  #Hash("myPassword", "SHA-512") #.

  (although I've used another algorithm; (D) I replaced with my password 'mypassword', and it generates the correct hash.

  * Phew *. :)

• Kuler home page works only not for me

  I'm trying to access the Kuler Web site and I see is a black background with the message "Kuler requires the latest version of the Adobe Flash Player." appears above the button 'Get Adobe Flash Player '. I clicked on the button, downloaded and installed the latest Flash Player (I left Safari before installing), but I still see exactly the same thing when I try to access the Kuler site. Any suggestions?
  
  I've logged into my account Adobe but that did not help. I have also restarted and emptying the Cache of Safari but still the same. I use Safari and Mac OS X 10.4.9
  
  Thank you
  NAS
  

  Or try a manual uninstall and reinstall, as Mac OS X uninstaller does not work properly (bug was noted on that).
  Check what version you actually run here. For Mac/Win, it should be 9,0,47,0.
  Saami

• Dependent drop-down list of ADF works only not for me

  I used the following example
  
  [http://ranajitsahoo.blogspot.com/2008/05/how-to-implement-dependent-drop-down.html]
  
  I can't list the employee to complete.
  
  I tested my emplist of the tester module app object and the values have been retrieved after that I get my setting for deptid
  
  This is what I checked:
  
  Properties departmentList - autosubmit = true, id is empdeptid
  
  Properties EMPLIST - triggers partial = empdeptid
  
  Def Page Properties:
  Links
  Run with the settings has been added
  iterator is Emplistiterator bind value = bindings. EmployeesView1DepartmentId.inputValue
  
  Executables:
  Call action has been created binded to executewithparms and placed before the emplist
  updating has been configured to render a model
  
  
  Can we see something that I missed?

  Hello

  using invokeAction is not a strong implementation as it fails for applications PPT. It only loads when the page is refreshed and there, it is not very reliable. The best option is to write code in the valueChangeListener for the departmentId field and run the query programmatically.

  Frank

• Product key not working only not for the upgrade from Windows 7 starter to win 10

  I have two Asus EEEPCs came with Windows 7 Starter.  The product key is on the bottom of the devices.  And they are completely legible.   4 years ago by ish and over the years the installations of Windows crashed, one of them, I installed Linux, the other, I played a bit with the installation of Android.  Today, I have upgraded to Windows 10 for each of them, wipe the disk and did a full install from USB.  One of them was perfectly, the second installation won't take the period key, the product license.  I even tried to change the characters only TWO that could be incorrect due to friction vs O Q and still nothing.   is there a way to send an image of the product key to Microsoft and someone to tell me what the heck is wrong with it?

  Try to contact support to have reactivated it:

  Activate your Windows 10 license with Microsoft Chat support

• Acrobat Pro V9 serial number works only not for installation

  I need to reinstall my Acrobat pro v.9 on my new PC, however the serial number from my account no longer works. How can I get a new or existing difficulty my serial number serial number, so I can reinstall the Acrobat Pro v9?

  Thank you

  JK

  Acrobat 9 is not compatible with Windows 10.