Filter DefaultVIServerMode Multiple

When using DefaultVIServerMode in Multiple mode, is it possible to filter on which host to connect without return to the only or log out of one of the hosts?

For example, if you connect to a vCenter and connect directly to a host that is located in the vCenter, and running the Get-VMHost cmdlet it returns twice.

You can use the Server parameter to do this on the Get-VMHost cmdlet.

Tags: VMware

Similar Questions

  • How to url using NOT IN (NIN) IR filter for multiple values?

    Apex 5.0.1 (but should work for Apex 4.2)

    I want to set a url with an IR filter using the filter NOT IN. For example, to get a filter that says: status not in (3,4)

    To do this, we can use the url IRNIN_STATUS parameter.

    This method works. Problem is how can I set multiple values in the url?

    IRNIN_STATUS:3, 4 will give a filter 'status not in (3) '

    4 is interpreted as the following for the next parameter value, even if there is no additional parameters.

    Find / remember the solution:

    We can add the backslashes to values to distinguish them from others.

    IRNIN_STATUS:\3, 4

  • Filter Gallery multiple selection in Muse?

    Is there a widget that makes possible by selecting several categories in a gallery?

    Like this (http://designwoop.com/labs/filtered-portfolio/), but with the ability to select categories A and B without selecting C?

    I saw some of the filters gallery here (is it possible Muse? portfolio tri), but none of them does support multiple selection, I see.

    You can try this:http://musewidgets.com/collections/all/products/gallery-filter

    or if you host the BC then you can use Web app to create a gallery and add the filter values.

    Thank you

    Sanjit

  • Is it possible to apply a filter to multiple layers without conversion to dynamic object?

    Title

    Maybe this script filter selected layers will do what you want.

    http://www.PS-Bridge-scripts.TalkTalk.NET/

  • filter multiple channels

    Hello, I have another problem here, just started to learn the filtering and decided to practice on the job making, im if you have this one question: I have two signals on channels of entry of two pressure sensors that come with high noise. I tried to split the signals, filter, and then merge again to send to waveform, but it does not somehow, and I thought that if there was a specific filter for multiple channels, I read that some TREES can divide signals itself and merge them automatically, but I couldn't find one. suggestions for beginners? Thanks in advance

    PS by the way, managed to filter one of the signals manually split and for some reason, the waveform to the display of the data of pressure with sound sensor stops working after apprx 3 sec, it kind of drags a bit and then goes black blank, so any suggestions on this point, would much appreciate

    PPS two graphics of waveform showing the initial data of the sensors go blank after a while at the same time black

    Hello Pomplamoose,

    I forgot to mention something: If you set playback VI to N samples then wire a constant for the number of samples per input channel. A good way would be to read in samples of 1000 per iteration.

    Part Fliltering:

    First of all, if you want to filter the high sounds you use Lowpass Fliter.

    Attached you will find your VI with 2 ways how you can filter your signals.

    (1) easy solution with express filter VI.

    (2) VI of Butterworth filter, the way in which you the tried.

    Some explanations to 2):

    If you use the butterworth VI as a low pass/high pass filter filter, it ignores the entrance of high cut-off frequency. The entry, you should use is the lowcutoff FREQ.

    In VI I provide you with there is no synchronization of the signal information once it is filtered, because you only use data of Y of the type of waveform. If you have calendar information in your signal you could do that with the construction of a waveform type after you filtered the data Y.

    Therefore, you have no synchronization of the signal you need to resize the chart you can see the filtered together signal.

    To merge the signals after you their filtered, you have 2 ways:

    (1) build an array of filters.

    (2) use the signals of fusion VI.

    If you need help just ask, otherwise mark as resolved.

    Kind regards

    Markus Mayr

  • List() FileConnection with filter

    Hello

    I want to list the files in a folder, I am able to list all the files, or to add a filter that lists, for example, "*.mp3" files, but I can't figure out how to use a filter for several "file extensions".

    I tried several kinds of filters syntax, or regular expressions too, but without success.

    What I want to do is list all *.wav and *.mp3 files in a directory.

    is it possible to use the method list() FileConnecion with a filter like this: fc.list ("*.wav, *.mp3" ");?

    Best rergards,

    Strato

    I appreciated that you can use the code directly, but the samples takes a list of files and filter based on multiple filters.  If the UI bits are useless to you, but the filtering code is similar to what you want.

    Alternatively, if you have more than one filter, make multiple calls of list().

    The API does not support what you want, but the additional coding necessary to do what you want is not difficult.  Rather than spend time to discuss and ask questions about it, I have just come down and write it.

  • Find entities within multiple vCenters

    Well... now that my brain is wrecked near I ask for help

    I'm doing a script to search for an entity as a whole of the Vcenters. I have to put the name of the entity, the Type (I give to make this variable...) and the Vcenter... Only two types of information from different vcenters.

    Example:

    Name Type
    CL002-01Cluster
    Vm001-POCVirtualMachine

    The challenge for this task is to reduce the response time... The old writing back information, but a lot of time is wasted.

    I came here and my brain won't work more... Any help?

    Add: a question... is it possible to connect to multiple Vcenters using 'orders-work' and use the connection information of them somehow?

    #Add-PSSnapin VMware.VimAutomation.Core
#Add-PSSnapin VMware.VumAutomation
#. "%programfiles%\VMware\Infrastructure\vSphere PowerCLI\Scripts\Initialize-PowerCLIEnvironment.ps1"
# Adds the base cmdlets
Add-PSSnapin VMware.VimAutomation.Core -EA SilentlyContinue
# Set to multiple VC Mode 
if(((Get-PowerCLIConfiguration -Scope Session).DefaultVIServerMode) -ne "Multiple") {
    Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope AllUsers -Confirm:$false | Out-Null
    Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope User -Confirm:$false | Out-Null
    Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope Session -Confirm:$false | Out-Null
}
$count = 0
Function Get-INFOS{
    param($dcInfo)
    
    Get-Inventory -Location $dcInfo
    
}
Function Find{   
    
    foreach ($info in $finalOUTPUT){
        if($info.Name -match "$typed*"){
        
            $infoFound = $info.Name
            $vcFound = ((($info.uid.split("@"))[1]).split(":"))[0]
        
            Write-host "
            Result Found($count):
                Nome: $infoFound
                VCenter: $VCFound
            " -ForegroundColor Green
            $count = $count +1
        }
    }
}
Function Load{
$vCenters= import-csv lista_vcenters.csv -Header("Vcenter")
$finalOUTPUT = @()
#$finalOUTPUT = "" | Select-Object VC, EntityType, Entity
 
Write-Host ("Getting the Inventory info from {0} vCenters." -f $vCenters.Length)
 
foreach ($vCenter in $vCenters) {
        Start-job -scriptblock{  
    $vc = Connect-VIServer $vCenter.Vcenter -WarningAction SilentlyContinue
      
    if (!$vc) {
  Write-Host "Failure connecting to the vCenter $vCenter."
  exit
 }      
    $dcs = Get-Datacenter -Server $vc
    
    foreach ($dc in $dcs) {
        $vcname = $vCenter.vcenter
        Write-host " "
        Write-Host "Getting info from $vcname" -ForegroundColor Green
          $finalOUTPUT += Get-INFOS $dc
    }
        
    Disconnect-VIServer $vc -Confirm:$false
    } | Wait-Job
}
}
Load
$typed = Read-Host "Type the name of the Entity you want to find:"
Find
while(((Read-Host "Do you want to start a new Search?") -eq "y")){
    
    $count = 0    
    Clear
    
    $typed = Read-Host "Type the name of the Entity you want to find:"
    if($count -lt 1){
        Write-Host "No Results Found!" -ForegroundColor Red
    }
    Find
}

    When you run too many jobs in parallel and thus focus on memory and CPU, the total duration of the session, then if you run them in batches.

    With the Invoke-Command cmdlet, you use the ThrottleLimit parameter, which allows better control how much desired parallelism.

    See also example 2 the Start-Job cmdlet.

  • Inventory of VC using powercli

    Hi all

    I'm looking for a script using powercli for several stocks of VCenterservers something like Vcenter name, host name, name of vm, the VM OS. Notes VM, information data store and vm tools release in excel or csv format

    Note: for multiple Vcenters

    You can check the PowerCLI version you are running? You can do it with the Get-PowerCLIVersion cmdlet. The latest version is: "VMware vSphere PowerCLI 5.1 Release 2 build 1012425. If you are using an earlier version, then please install the latest version. You can download this version of http://www.vmware.com/go/powercli.

    The

    Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope User -Confirm:$false

    command should work in the latest version of PowerCLI.

    Certificate warnings can be removed with the following command:

    Set-PowerCLIConfiguration -InvalidCertificateAction Ignore -Scope User -Confirm:$false

    To make the script more quickly, I did a new version using the cmdlet Get-View . This new version is about three times faster than the former.

    & { foreach ($vCenterServer in $DefaultVIServers)
    {
      Get-View -Server $vCenterServer -ViewType VirtualMachine -Filter @{"Config.Template"="False"} -Property Name,
        Runtime.Host,
        Guest.GuestFullName,
        Config.Annotation,
        Datastore,
        Config.Tools.ToolsVersion |
      Select-Object -Property @{N="vCenter";E={$vCenterServer.Name}},
        @{N="VMHost";E={(Get-View -Id $_.Runtime.Host -Property Name).Name}},
        @{N="VM";E={$_.Name}},
        @{N="Guest OS";E={$_.Guest.GuestFullName}},
        @{N="Notes";E={$_.Config.Annotation}},
        @{N="Datastores";E={[string]::Join(',',(Get-View -Id $_.Datastore).Name)}},
        @{N="VMware Tools version";E={$_.Config.Tools.ToolsVersion}}
    }
  } |
Export-Csv -Path VMsInfo.csv -NoTypeInformation -UseCulture

  • In bulk 2 - export filters

    I'm experimenting with some "Advanced" filtering in bulk and my clocks are found in an error state. These expressions are not supported?

    (1) contact field criteria + membership criteria

    Filter: ("{{Contact.Field (C_FirstName)}}" = 'John' AND EXISTS('{{ContactList[2060]}}')

    Result:

    [{: syncUri = > "/ sync/5718",}]

    : County = > 0,

    : gravity = > 'error ',.

    : statusCode = > 'ELQ-00107. "

    : message = > 'There was an error in treatment of export.',

    : converted = > "" 2014-06 - 30 T 17: 12:40.9730000Z '}, "

    {: syncUri = > "/ sync/5718 ',}

    : County = > 0,

    : gravity = > 'information ',.

    : statusCode = > 'ELQ-00101.

    : message = > "Sync treated for synchronization 5718, resulting in an error state."

    : converted = > "" 2014-06 - 30 T 17: 12:41.0830000Z '}] "


    2) criteria for membership + status criteria

    Filter: (EXISTS('{{ContactList[2060]}}') AND STATUS('{{EmailGroup[1]}}')

    Result: same as above.

    3) two criteria of status

    Filter: (STATUS('{{EmailGroup[1]}}') = 'subscribed' AND STATUS('{{EmailGroup[2]}}') = 'Subscriber')

    Result: same as above.

    Thank you

    Ilya

    Hi Ilya, filter on multiple fields is supported.  Filtering on multiple EXISTS or STATUS is not currently supported.

  • [ADF, JDev12.1.3] LOV entry: is it possible to change the criteria to view / query to use before the opening of the popup?

    Hallo,

    I would like to know if it is possible to change the criteria for the view or the query used by an LOV entry before the opening of the pop-up window (on the click the icon in the search).

    Thank you

    Federico

    You can change the implicit vc used by the LOV, overwriting the popuplistener and a different VC as

    {} public void onLauchLov (LaunchPopupEvent launchPopupEvent)

    String submittedValue = (String) launchPopupEvent.getSubmittedValue ();

    run the queries only if value is submitted

    If (submittedValue! = null & submittedValue.length () > 0) {}

    RichInputListOfValues lovComp = launchPopupEvent.getComponent ((RichInputListOfValues));

    BindingContext bindingCtx = BindingContext.getCurrent ();

    BindingContainer links = bindingCtx.getCurrentBindingsEntry ();

    JUCtrlListBinding lov = bindings.get ("JobId") (JUCtrlListBinding);

    VCM ViewCriteriaManager = lov.getListIterBinding () .getViewObject () .getViewCriteriaManager ();

    ensure that the criteria of display is disabled

    vcm.removeViewCriteria (ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);

    Create a new view of the criteria of

    ViewCriteria vc = new ViewCriteria (lov.getListIterBinding () .getViewObject ());

    Use the name of the default view criteria

    '__DefaultViewCriteria__ '.

    vc.setName (ViewCriteriaManager.IMPLICIT_VIEW_CRITERIA_NAME);

    create a display for all queryable attributes criteria

    VCR ViewCriteriaRow = new ViewCriteriaRow (vc);

    for this example, I put the query filter for 60 DepartmentId.

    You can determine when running in reading to a managed bean

    or the link layer

    vcr.setAttribute ("JobId", submittedValue + "%");

    Note also that the line of view criteria consists of all attributes

    who belong to the view list LOV object, which means that you can

    filter on multiple attributes

    vc.addRow (vcr);

    lov.getListIterBinding () .getViewObject () .applyViewCriteria (vc);

    }

    }

    Here's the LOV on the employee on the work of attribte based on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/29-adf-model-driven-llist-of-values-169171.pdf

    Timo

  • Need help to update to work with the new vSphere environment 6

    I have a great powershell script some time ago, I created to clone our production servers in a development environment and configure them for use in isolated vShield development networks.

    We have recently updated our environment vSphere vSphere 6 and changed architecture autour 5.

    Previously with vSphere 5 we had a unique vCenter server that managed our two datacenters by itself.

    With the new design of vSphere 6, we have a PSC and VCSA server to each data center in one area of SSO.

    The first thing I did with my script of cloning is up-to-date reference vcenter for a table of two servers, so I connect to two VCs at the same time.

    This allows me to see and manage the two vCenters virtual computer guests, so get - vm strives to see the comments of the source.

    However, the problem is that when I try to clone a virtual machine from one data center to another, the command fails because it can't find the virtual machine to clone.

    # Virtual Centre server or VM host to connect to
$aryVIServer = @("vc01.domain.com", "vc02.domain.com")

# Load VMware environment
Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -InvalidCertificateAction Ignore -Confirm:$false | Out-Null
$VIServer = Connect-VIServer $aryVIServer

# Server cluster group to deploy to
$strVMCluster = "Bubbles"

# Define name of new server including environment prefix
$vmName = "$($envPrefix)-$($CloneServer)"

# Select Host with least memory consumption
$selectedHostObj = Get-VMHost -Location $strVMCluster | Sort-Object -Property MemoryUsageGB | Select-Object -First 1

# Select folder to place VM guest into
$folderObj = Get-Datacenter -Cluster $strVMCluster | Get-Folder $selectedBubble

# Select datastore with most available space
$selectedDatastoreObj = Get-DataStore -VMHost $selectedHostObj | Sort-Object -Property FreeSpaceGB -descending | Select-Object -First 1

# Clone new VM from running Server
$newVM = New-VM -Name $vmName -VM $CloneServer -VMHost $selectedHostObj -Datastore $selectedDatastoreObj -DiskStorageFormat "Thin" -Location $folderObj -Confirm:$false

    He used to work very well when there was a single VC but of course does not now with two.

    So far, the only difference is the change in VCs. We always use the same exact 5.0 running ESXi hosts to the same place in separate data centers.

    Oh and I'm now using powercli 6.3 R1 instead of 5.5 R1.

    I look forward to this type of procedure should work fine, and I just need a different command for virtual machine cloning now?

    Well, I have solved the first problem according to them here:

    Re: Impossible to deploy VM model on different vCenter Server (in the same domain of SINGLE sign-on)

    However, now I can't run Invoke VMScript without getting an error that the proxy authentication is required.

    If I remove all my proxy settings in Internet Explorer, then it connects fine but this script must be run by a number of engineers without being dependent on their proxy settings are disabled.

    I can programmatically change the settings of proxy at the beginning of the script, but nothing not preventing to change those back if they use their browser and break execution of the halfway of script.

    Never had any problems with the Proxy settings before and I didn't know any other messages that have directly relevant air.

    Anyone know of a way to avoid this?

  • Get - VM: with "xyz" name VM is not found using the specified filters.

    Hello everyone!

    I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
    It happens that several cases vm does not exist in vCenter and returns me the below error:

    Get - vm: 04/07/2016-14:41:58Get - VMVM with the name "pxl1sso00008" was not found using the specified filters.

    No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

    + foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

    +~~~~~~~~~~~~~~
    + CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)
    + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM



    How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.

    Follow the .ps1 file:



    $vmlist = Get-Content C:\vmnames.csv

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
{
Add-PSSnapin VMware*
Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
[void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
}
    
$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
     
foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}

    Laurent,

    See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

    $vmlist = Get-Content C:\vmnames.csv  

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
    Add-PSSnapin VMware*
    Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
    [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
    if ($getVmwareSnapinErr.Count -gt 0) {
        Add-PSSnapin VMware.VimAutomation.Core
    }
}

$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
$arrVMInfo = @()

foreach ($vmName in $vmList) {
    $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
    if ($vm -eq $null) {
        $arrVMInfo += New-Object PSObject -Property @{ `
            Name=$vmName `
        }
    }
    else {
        $arrVMInfo += New-Object PSObject -Property @{ `
            "Name"=$vm.name; `
            "Network"=$vm.Network.Network; `
            "IP Address"=$vm.IPAddress `
        }
    }
}
$arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation

  • Several cloning for vCenter vCenter vCenter

    I hope I can express this question, so please forgive me if I cannot explain in detail the scenario, but here goes:

    We originally had a single vCenter Server (physical Mahcine) with two visible in it data centers, one in New Jersey and the other in SC. We decided to do two new virtual vCenters one with a data center called NJ and the other with a data center called SC. In our old vcenter, we had a script automated CLI power who cloned a machine in the datacenter of SC, to remove the NIC card, he converted to model and then cloned it on the side of the data center NJ over the WAN. The script looked a little like this:

    ######################

    SE connect-VIServer vCenter

    ######################

    $Temp = get-Template-name "SERVER_CLONE_TODAYSDATE" <-this exists in the SC data center

    $VMHOSTNJ = "hostname1 - 1.domainname.com.

    ######################

    New-model - $(get-modèle $Temp)-name "SERVER_CLONE_TODAYSDATE" - location NJ - VMHost Datastore - NJ_DS_04 - DiskStorageFormat $VMHOSTNJ - thin confirm: $false

    In the past when this script would go on a single vcenter who managed two data centers, if clone the model to the data center of NJ in the root folder. Now with the new game by being a vCenter in New Jersey and a vCenter in SC operating in linked mode, so that I can not get the deployment script the model over the WAN. I get the error:

    New-model: 30/10/2013-11:05:19New-modelThe arguments must be from the same server.

    I have njvcenter Connect-VIServer - AllLinked and scvcenter Connect-VIServer - AllLinked in the script now, but still can not overcome this barrier of the cloning of the model on the WAN. I enabled Set-PowerCLIConfiguration-DefaultVIServerMode - multiple user scope.

    Is there a way to any act of brilliance script that someone can provide that may allow for me to continue with this automated process of new in any of these two related vcenters?

    I tried a few variables such as parameters:

    $VMHOSTNJ = get-VMHost "hostname.domainname.com" - Server njvcenter

    $NJDATASTORE = get-Datastore NJ_DS_05 - Server njvcenter

    $NJFOLDER = get-folder "~ SC to NJ cloning"-Server njvcenter

    And then placed them in my script in an effort for the script to run the clone of the scvcenter, but know to turn to the njvcenter for the - location - data store - VMHost

    If it's confusing, I apologize if you have questions ask away, we want to get to a two purposes of failover vcenter environment, however the script reduces the time more then an hour on which would take nearly 4 hours to complete manually. Any help would be greatly appreciated!

    When you have no storage shared between the vCenters, take note of KB2013516

  • How can I automate the creation of a partition from scratch for a large number of hosts?

    I would like to help with the following steps to cerate a partition scratch on all hosts that have no script, then reprot back to me which guests were to have created.

    all my ESXi hosts have a LUN to start with the space, all the boot LUN are named with the same naming that is conveiton "hostname-localstorage.

    I would like to come up with a script that will check each host in a cluster for a partition of scaratch, if it does not create the folder ".locker -hostname" on local storrage and then set the partition scratching to the new location. Then the new report to me, which is already a partition from scratch and those to whom he owed create a parition scratch to so I can plan then a good time to put the hosts with newly created partitions scratch mainenance mode and restart their.

    I glued the manual way to do it below. I'd appreciate any help anyone can give and it will be well appreciated. I try to avoid to do 1000 hours below. Thanks in advance...

    Note: Before you begin, make sure that/tmp/scratch exists. If it does not exist, create it by using the command #mkdir/tmp/scratch.
    1. Open a command prompt where the PowerCLI is installed.
    2. Connecting to host ESXi using the command:

      connect-viserver ESXHostnameOrIP

    3. A list of the data stores accessible by using the ESXi Host command:

      Get-Datastore

    4. Mount a read/write as a PSDrive data store using the command:

      New-PSDrive -Name "mounteddatastore" -Root \ -PSProvider VimDatastore -Datastore (Get-Datastore "DatastoreName")

    5. Access the PSDrive new using the command:

      Set-Location mounteddatastore:

    6. Create a directory named only for the ESXi host using the command:

      New-Item "DirectoryName" -ItemType directory

      For example:

      New-Item ".locker-ESXHostname" -ItemType directory

    7. Check the current value of the ScratchConfig.ConfiguredScratchLocation configuration with the command option:

      Get-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation"

    8. Change the ScratchConfig.ConfiguredScratchLocation configuration option, specifying the full path to the directory created in step 6, using the command:

      Set-VMHostAdvancedConfiguration -Name "ScratchConfig.ConfiguredScratchLocation" -Value "/vmfs/volumes/DatastoreName/DirectoryName"

      For example:

      Set-VMHostAdvancedConfiguration  -Name "ScratchConfig.ConfiguredScratchLocation" -Value  "/vmfs/volumes/Datastore1/.locker-ESXHostname"

    9. The ESXi host in maintenance mode and restart so that the configuration change to take effect.

    Mike P

    I have something similar to use the script below.

    I think you'll find that your out in there.

    $configName = 'ScratchConfig.ConfiguredScratchLocation'

$mode,$warn = Get-PowerCLIConfiguration | %{$_.DefaultVIServerMode,$_.DisplayDeprecationWarnings}Set-PowerCLIConfiguration -DefaultVIServerMode "Multiple" -DisplayDeprecationWarnings:$false

Get-VMHost | where {$_.ExtensionData.Config.Product.ProductLineId -eq "embeddedEsx"} | %{    Connect-VIServer -Server $_.Name -User root -Password MyPswd    $scratch = (Get-VMHostAdvancedConfiguration -VMHost $_)[$configName]    $tgtName = ".locker-" + $_.Name.Split('.')[0]    if($scratch -notmatch ($tgtName + "$")){        $ds = Get-Datastore -VMHost $_ | where {$_.Name -match "localstorage"}        if($ds){            Set-Location -Path $ds.DatastoreBrowserPath            New-Item $tgtName -ItemType directory            Set-VMHostAdvancedConfiguration -Name $configName -Value ('/vmfs/volumes/' + $ds.Name + '/' + $tgtName) -Confirm:$false            Set-VMHost -VMHost $_ -State 'Maintenance' -Confirm:$false            Restart-VMHost -VMHost $_ -Confirm:$false            Set-VMHost -VMHost $_ -State 'Connected' -Confirm:$false        }    }    Disconnect-VIServer -Server $_.Name}

Set-PowerCLIConfiguration -DefaultVIServerMode $mode -DisplayDeprecationWarnings:$warn

    It uses the DatastoreBrowserPath that Vitali has suggested.

  • detailed report of psp and host ATAS

    Hi guys,.

    I am trying to create a script that will describe in detail below.

    ATAS DefaultPSP ESX host

    testesxhost fixed VMW_SATP_SYMM

    I got the esxcli commands to connect and to question but having problems with the output.

    Any help would be appreciated.

    $test = @)


    {foreach ($esxcli in Get-EsxCli)
    $details = "" | Select-Object host, ATAS, PSP

    $symsatp = $esxcli.nmp.satp.list () | Where-Object {$_.name - eq "VMW_SATP_SYMM"} | Select-Object name
    $sympsp = $esxcli.nmp.satp.list () | Where-Object {$_.name - eq "VMW_SATP_SYMM"} | Select-Object defaultpsp

    $details.satp = $symsatp
    $details.psp = $sympsp
    $test += $details
    }

    $test

    to connect-VIServer-server 'xxx' - username "xxx" - password "xxx".
    $user = "root".
    $pswd = "xxx".
    $vmhost = get-VMHost
    $report = @)
    $oldConfig = get-PowerCLIConfiguration
    Game-PowerCLIConfiguration - DefaultVIServerMode "Multiple" - confirm: $false | Out-Null
    {foreach ($esx in $vmhost)
    $esxConnect = connect-VIServer-Server $esx.name - user $user-password $pswd
    $esxcli = get-EsxCli-Server $esxconnect
    $defaultpsp = ($esxcli.nmp.satp.list () | where {$_.name - eq "VMW_SATP_SYMM"}) .defaultpsp
    $row = select-Object - InputObject $esx, $defaultpsp-property @{"Name" = 'ESXHost'; {'Expression' = {$esx.name}}.
    @{'Name' = 'HOME'; "Expression" is {"VMW_SATP_SYMM"}},
    @{"Name" = 'DefaultPSP'; "Expression" = {$defaultpsp}}
    $report += $row
                      
    Disconnect-VIServer-Server $esx. Name - confirm: $false
    }
    $report | Export-Csv "C:\satp_psp.csv" - NoTypeInformation - UseCulture
    Game-PowerCLIConfiguration - DefaultVIServerMode $oldConfig.DefaultVIServerMode - confirm: $false | Out-Null

Maybe you are looking for