Get - VM: with "xyz" name VM is not found using the specified filters.

Hello everyone!

I have a script that reads a CSV with multiple host names, to connect to vCenter and should get the name of host, ip and PortGroup information to generate an external file of CSV.
It happens that several cases vm does not exist in vCenter and returns me the below error:

Get - vm: 04/07/2016-14:41:58Get - VMVM with the name "pxl1sso00008" was not found using the specified filters.

No caractere:31 of C:\Users\f3135606\Desktop\vmTeste1.ps1:25

+ foreach ($vmName in $vmList) {get - vm $vmName |} Select Name, @{N = "Network"; e = {$_...}}

+~~~~~~~~~~~~~~
+ CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)
+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVM



How would I do to get the information from an input file, see the vCenter and if this positive results write the file, ignoring errors. Ideally, if not to find the machine, simply create a line in the output file with only the hostname with the rest in white.

Follow the .ps1 file:



$vmlist = Get-Content C:\vmnames.csv

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))
{
Add-PSSnapin VMware*
Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null  
[void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
if ($getVmwareSnapinErr.Count -gt 0) {    Add-PSSnapin VMware.VimAutomation.Core }
}
    
$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
     
foreach ($vmName in $vmList) {get-vm $vmName| Select Name, @{N="Network"; e={ $_ | get-networkadapter|Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IP Address";E={@($_.guest.IPAddress[0])}}|Export-Csv –path c:\scripts\vlans.csv –NoTypeInformation}

Laurent,

See below... should get what you want... If the virtual machine is not found that it only allows to correct the virtual computer name in the output.

$vmlist = Get-Content C:\vmnames.csv  

if (!(Get-PSSnapin -Name VMware.VimAutomation.Core -ErrorAction SilentlyContinue))  {
    Add-PSSnapin VMware*
    Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -DefaultVIServerMode multiple -InvalidCertificateAction Ignore -Scope Session -ProxyPolicy NoProxy -Confirm:$false | Out-Null
    [void](Get-PSSnapin VMWare.VimAutomation.Core -ErrorVariable getVmwareSnapinErr 2> $null)
    if ($getVmwareSnapinErr.Count -gt 0) {
        Add-PSSnapin VMware.VimAutomation.Core
    }
}

$VCconn = Connect-VIServer $vCenter -User $vUsuario -Password $vPass > $null
$arrVMInfo = @()

foreach ($vmName in $vmList) {
    $vm = get-vm $vmName -ErrorAction SilentlyContinue -ErrorVariable VMError | Select Name, @{N="Network";E={ $_ | get-networkadapter | Select-Object @{N="Network";E={$_.NetworkName}}} }, @{N="IPAddress";E={@($_.guest.IPAddress[0])}}
    if ($vm -eq $null) {
        $arrVMInfo += New-Object PSObject -Property @{ `
            Name=$vmName `
        }
    }
    else {
        $arrVMInfo += New-Object PSObject -Property @{ `
            "Name"=$vm.name; `
            "Network"=$vm.Network.Network; `
            "IP Address"=$vm.IPAddress `
        }
    }
}
$arrVMInfo | Select Name, Network, "IP Address" | Export-Csv "c:\scripts\vlans.csv" -NoTypeInformation

Tags: VMware

Similar Questions

  • When I want to print my coreldraw 13 error "file of valid workspace not found in the specified path.

    whenever I try to print a document on my coreldraw is will just put "file of valid workspace not found in the specified path.

    Hello

    Thanks for posting your question in the Microsoft community forum!

    I understand that you encounter printing problems in CorelDraw. I will try to help you with this.

    (1) is the issue limited to only Corel Draw?

    I suggest you to restore the default values by pressing the F8 key while the program starts.

    Reference: File not found valid environment...

    http://CorelDRAW.com/forums/t/4156.aspx

    If the problem persists, I suggest you contact the link mentioned below for the best support.

    http://CorelDRAW.com/forums/

    Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • Play a suspended virtual machine, vmdk file not found or the specified file is not a virtual disk

    Hi, I have a problem that I can't solve with the usual methods.

    My data

    • software: VMVware Workstation 6.5.1 build 126130

    • Host: NB HP Compaq 2510p with 2 GB of ram

    • OS: Windows XP Pro SP3 5.12.2600

    I have a Win XP Pro SP3 computer virtual created for my work:

    • 6-5 - 7.0 VM workstation

    • RAM: 512 MB

    • Windows XP Pro operating system

    • Processors: 1

    • CDRom: Autodetect

    • Floppy: Autodetect

    • USB: present

    • Sound card: Autodetect

    • Display: Autodetect

    • HARD drive is divided into 2 GB files

    The problem lies in the HARD disk:

    • 40 GB declared

    • 0 MB recognized by the system

    My VM was functional complete. After a suspension

    • The State remains suspended

    • When I try to resume, a pop-up window will appear "file not found: IATROS VM.vmdk" go through it...

    the vmdk file exists (see my attached files).

    When I try to see the features on the parameters, appears "the specified file is not a virtual disk" and all data in the pop-up are unknown or missing.

    I tryied to use the vmware_vdiskmanager with the command vmware - vdiskmanager.exe - R 'e:\appo1\IATROS VM.vmdk' in vain also.

    I think that it is necessary to recreate a file descriptor for disc divided into 2 GB files.

    http://KB.VMware.com/selfservice/microsotes/search.do?language=en_US & cmd = displayKC & externalId = 1026266

    but, if we compare the contents of the VMDK file with the discussion in the article, there seems to be no problem of format or content.

    There are suggestions to solve the problem?

    can I await your response?

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

    I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

    Thank you for visiting the Microsoft answers community.

    The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

  • The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.


    I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

    The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

    EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

    Thank you

    Ron

    Hi Ron,

    Can you please do the following?

    -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

    -Log on to the EM console, go to the homepage of the listener.

    -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

    -Ensure that the parameters, including the Listener.ora directory, are properly.

    Kind regards

    -Loc

  • The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

    I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

    Basically, what I did is the following:

    Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

    Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

    The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

    Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

    BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

    SAML access required but not tempted by customer

    Attributes:

    Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

    Time = MON may 20 16:06:41 MDT 2013

    Gravity = AUDIT_FAIL

    Node = ViewConnection.access360.ca

    Module = broker

    Recognized = true

    Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

    As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

    Any ideas?

    A

    So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

    Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

    Now, I'm on ThinApps for desktops as well as the web interface integration.

    I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

    I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

    A

  • Property named 'name' is not found on the subject: VcVirtualMachine

    Hello

    I'm struggeling with a strange problem.

    I try to get all the VMS in vcenter (s) through sdk like this:

    var sdkConnections = VcPlugin.allSdkConnections;
    for (var i = 0; i < sdkConnections.length; i ++) {}
    var sdkConnection = sdkConnections [i];
    machines virtual var = sdkConnection.getAllVirtualMachines ();
    If (vms.length > 0) {}
    for (var j = 0; j < vms.length; j ++) {}
    var vm = vms [j];

    After that, I try to get the id and the name like this (e.g.) to write in the log example:

    System.log ("--> > > DEBUG - IE '" + vm.id + "'");

    System.log ("--> > > DEBUG-name '" + vm.name + "'");

    but DO NOT several id EXISTS in the vcenter BDD but coming back since the sdk?
    Te is a virtual machine with the id "id-47", which is not in the vpx_vm table
    but another with the id 'id-647' is in this table.
    When I try to get the name (vm.name) of the two I find myself in an exception with the message "property named 'name' is not found on the object: VcVirtualMachine.
    I tried to avoid this and to verify the existence of the property, but without success.
    How well to check the existence of the 'vm.name' without ending up in an error?
    (another question would be: why is the receiving of vm via the sdk which do not exist in vcenter?)
    Thank you!!!
    Chris

    Use try/catch...

    This will allow your code to continue treatment and simply log the errors rather than throw an exception.

    try{
// your code here....
}catch(err){
     System.log("Error: "+err);
}

  • Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

    WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

    It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

    http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

  • I can't extract the zip files; I get an error message that says: "Application not found".

    I can't extract the zip files; I get an error message that says: "Application not found".  When I check help & press the Start button, it tells how to do it.  I thought a program to automatically extract compressed files came with Vista.

    Hello

    1. you use the functionality of Windows Vista to unzip file or third party software?

    2. have you done any software or hardware changes on your computer before this problem?

    To work with this problem, see the following methods.

    Method 1:

    Scan of the SFC

    Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

    http://support.Microsoft.com/kb/929833

    View the results of the analysis.

    Method 2:

    Run the fixit from following link.

    Difficulty of broken desktop shortcuts and common system maintenance tasks
    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    In addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

    Check if it helps.

  • error packaed and launch: Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path:

    Hello

    I get this error when you try to run the sample of cards on the corrugation Simulator:

    Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".

    The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged.  With the help of Mac, the latest versions of everything.  The application runs in undulation ok, but I can't throw on the SIM BB10.

    Someone else have this error and know why?

    PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?

    PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged.  I guess it should not but leaves me clueless as to whats wrong with cards.

    Thank you

    The two directories (in the extensions directory and maps project directory) have permissions to 777.

    But you gave me an idea...

    It turns out that simply by putting

    "Packages".

    in setting output wasn't enough, I need the full path

    for example: "/ Users/username/RippleSites/Maps/packed."

    and presto, now it works!

    Thank you!

  • How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

    How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

    [Profanity removed... MOD]

    Hello

    I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.

    Please see the below help documents:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    Kind regards

    Sheena

  • Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

    Original title: ntdll.dll error at boot fruity loops.

    get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

    Hello
    I suggest you contact support FL. I couldn't find all of the resources for this program.
    Eddie B.

  • When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible

    When I click on a link in an e-mail, I get the message following 'application not found. The only way I can access the site is to copy the link, but it is not always possible. Can you advise?

    Hello

    Follow these steps to solve the problem.


    Step 1
    a. Click Start, default programs
    b. Click set your default programs
    c. Select your browser from the list
    d. Click set this program as default
    e. click OK.

    Then proceed as follows:


    Step 2
    a. click settings by default access and computer program Set
    b. click on continue if you see the user account control prompt.
    c. click Customize
    d. Select your browser from the list
    e. click OK.

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Why do I get an empty folder named SightSpeed records not appearing in the folder My Documents/libraries?

    I get an empty folder named SightSpeed records not appearing in the My Documents/libraries folder in Windows 7. I have not all Dell products. I use Windows Messenger and Skype to make video calls (VOIP). Why this Dungeon appear even after I delete it?

    Hello ThomasSpero,

    It is the response that was returned by Logitech Forums:

    16/10/2012 09:00

    Hello spetho2001,

    The empty SightSpeed records record is a direct result of your Logitech Vid installation. The file is harmless and will remain empty unless the function to record video calls is implemented in Vid.

    enation815

    ---------------------------------------------------------------------------------------------------------

    It seems to be just a record created and will have nothing on the record unless you use the video recording option. You can test this information by recording a video call.

    I'll assume that the empty folder is not a problem.

    I hope this helps.

    Marilyn

  • I get an error saying that I am not connected to the internet (I'm) or my clock is in error (it isn't).

    Photoshop Essentials is installed on my computer, but as I'm using it for the first time I get a message saying that I am not connected to the internet, but I am or that the clock is wrong, but is not.

    I had a cat, but he said I must go to the technical support and I had spent as much time as I could. Any ideas?

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Maybe you are looking for

  • Since the update to 32.0 is sit and spin when checking w / FF to see if the plugins are up to date.

    When I go to "Tools" then click on "Add-ons" and then click "Plug-Ins" and then click "Check if Plug-Ins are up-to-date", it goes to Mozilla, check your plug in Page it does sit and turning to checking on the status of your plugins with Mozilla. I us

  • Toshiba 40TL838 - sleep timer does not work or works sometimes

    Hello I bought 40TL838 TVand I have problem with sleep clock does not work or works sometimesbut usually, you see on the screen a minute left and TV never turn off I try to change the language and also options the system reset does not help and updat

  • Update of Vista on the Satellite A100-813

    Please excuse the Novice... A that someone tried to accomplish the above? Currently, I had problems to find and identify downloads for blue-tooth and chip-set. Can someone advise? Read all documents lead me to be PSAA8 machine accepts the change?

  • How to reinstall a hp2610

    I've recently updated my system, but can not re - install my HP2610 printer because I can not find the... installation disc is there another way?  H E L P

  • Roxio photosuite 7 Platinum burn disc

    I decided to install roxio photosuite 7 Platinum back on my computer to make a floor photo, I have to say that I have not used for years. The problem I found is when I try to burn to disc it just won't do - I was wondering service Pack3 would be the