finalize the code after the conditional

Similar Questions

• I get the error 66 has code after installing IE9.

  original title: 66A error code

  I received this error 66A code after installing IE9.  Low IE9 loaded correctly but the update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708)

  will not be down load. This is the important part?

  Roxanne Conway
  http://go.Microsoft.com/fwlink/?LinkId=204898

  Help

  and support:
  http://support.Microsoft.com

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Can I use a Windows 8 promo code after the 31/01/2013 if it had not yet been used?

  I got a Windows 8 promo code, after that I bought my laptop in August 2012. I received an email giving me the code to upgrade, but I do not use it before January 31, 2013. Can I use the code or is this now invalid?

  $14.99 promotion has expired, so the free promo of Media Center. But it can't hurt to try!

  J W Stuart: http://www.pagestart.com

• I don't have a redemption code after you apply the student plan

  I don't have a redemption code after you apply the student plan

  Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  Do check host files mentioned in step: 3 article.

  Let me know if you still face barely...

  Concerning

  Megha Rawat

• Placing the code after the < body > body tag opening

  I would use Google tag on my Adobe Muse site manager.  I do not see how to add a snippet of code in the Head of a page section but Manager tags Google recommends to apply the code after the body opening < body > tag of each page due to its use of iframes.   Can someone tell me how to proceed?

  Thank you

  Hello

  Could you please check this thread,

  Re: Errors tag Google in Adobe Muse Manager

• How to add a tracking code after the opening &lt; body &gt; tag on a Master Page?

  I would use Google tag on my Adobe Muse site manager.  I do not see how to add a snippet of code in the Head of a page section but Manager tags Google recommends to apply the code after the body opening < body > tag of each page due to its use of iframes.   Can someone tell me how to proceed?

  Thank you

  Hello

  Could you please check this thread,

  Re: Errors tag Google in Adobe Muse Manager

• get the movie to delay execution of code after a click in a sprite

  Hello
  I want to know how I could get Director to delay execution of code after a click in a sprite. When I click on the sprite it changes its members and that it plays a sound, but after seconds, I would like that he can reset and have up to this writing some custom drivers to do this, but here Director to suspend the operation of this code for a few seconds and still play the movie. Is anyway to do this?
  
  Thank you

  pPause property

  on beginSprite me
  pPause = #off
  end

  on mouseUp me
  pPause = milliseconds
  -include your code here that you have already written
  -which will run immediately
  end

  on exitFrame me
  If pPause <> #off then
  If milliseconds > pPause + 1000 * 5 then
  -I used it 5 seconds. Change the 5 to everything which
  -number of seconds you need.
  -run the code or the manager who had to be delayed
  pPause = #off
  end if
  end if
  end

  --
  Craig Wollman
  Specialist jargon
  Word of mouth productions
  212-928-9581.

  www.wordofmouthpros.com
  "jclegs" wrote in message
  News:f17dd1$RKT$1@forums. Macromedia.com...
  > Hi
  > I want to know how I could get Director to delay execution of code after
  > a
  > sprite is clicked. When I click on the sprite it changes its members and plays
  > a
  > sound, but after a few seconds, I would like that it reset and have so far
  > writing
  > a couple of custom managers to do that, but want Director to pause
  > execution of this code for a few seconds and still play the movie. Are there
  > in any case
  > to do this?
  >
  > Thank you
  >

• Not transmitted after validation of the conditions

  Hi, I have a page which serves as a page to create/update. Depending on whether you are creating or updating, a request for CREATION or UPDATE value is passed to the page to determine how it behaves. If CREATE is spent, I show empty fields and create a button. If UPDATE is passed to the page, I display values surveyed on the ground and a button update. Everything worked well.
  
  Then I added in some point postings not null when you click the create/update buttons. Now, when I'm on the update page, and I deliberately leave a null field and click the update button, the validation fires and works. However, the new page with the displays error messages now the Create button. The same thing happens with other elements of the page that need to know if she should work as the page create or update.
  
  Thus, it seems that my CREATION and demand of UPDATE values are not through the postings. What I am doing wrong? Can I fix?
  
  Thank you
  Mark

  Brand:

  Rather use the State of the 'REQUEST' variable to determine the conditions to CREATE or UPDATE button is displayed, you could instead make these conditions button depends on the page element corresponding to the primary key column of the record displayed in the form.

  CITY

• Editing a text field in aform according to the conditions

  Hello
  
  We develop a custom form that has a rematch of the database.
  This form is a form master detail. He has a field called 'State' whose initial value is "Draft" and this field is present in the main part of the form.
  
  The logic of "Draft" is written in trigger for insertion before the header block.
  
  ---------------------
  Question
  ---------------------
  
  If the condition 'A' and 'B' is met, the status must be defined as a value called as 'sent ';
  
  If the condition is not satisfied and B is filled, status must be defined as a value called "Created";
  
  We do this in the trigger of subsequent update to the block level. But the changes do not take effect.
  Please let us know if this is the right approach for manage column. Note that the "Status" column is a column of data.
  
  
  Thanks and greetings
  SR

  HI SR,

  948611 wrote:
  Hello

  Thanks for your reply.

  I would remind the requirement:
  There are 3 statuses - project--> this-> created.

  During the initial creation of registration, it is in the planning stage.

  When this record is questioned in return and if a certain set of conditions is completed at the moment the State should change project to submitted project created or submitted.

  We reach the features above, by creating a timer in the post REQUEST trigger BLOCK-level.
  ________________________________________
  Create_timer ('ABC', 1000, no_repeat);
  ________________________________________

  In WHEN_TIMER_EXPIRED relaxation at the level of the FORM, we require a program unit that has the logic below:
  We are looking for a certain set of conditions and modify accordingly the status as:
  If condition A is true: block.status = project;
  If condition B: block.status = subject;
  If the condition C: block.status = crΘΘ;

  After that this COMMIT_FORM is published.

  So your main point works well. ;)

  Whenever the State gets past submitted or created, needs form to gray out which means that the user should not able to change the shape at this point.
  For this, we use in the trigger after REQUEST of the BUILDING, the following:

  set_block_property ("BLOCK_NAME", insert_allowed, property_false)
  set_block_property ("BLOCK_NAME", update_allowed, property_false)

  The code above works?

  There will be a situation when the record that we ask for a status as an Envoy and the creation condition is met. In this case, the State should get passed to creation of subject. But somehow, it is not updated.

  Please provide information on the implementation of this requirement.

  What done you for this and where?

  Hamid

  Mark correct/good to help others to get the right answers. *

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69

• The condition of the Terminal loop in a wiring SCTL

  Hi all.

  I'm relatively new to LabVIEW, and I have a little doubt with a Terminal loop condition which I think is pretty basic. When using a while loop, the VI breaks if there is no condition connected to the Terminal, even if it is a constant t. The same is also pretty explicitly mentioned hereand I think that makes perfect sense.

  Now, I am interested in some code LabVIEW FPGA on a forum post that I was living to understand better SCTLs (only the attached photo is NOT my own code, credits to Mahesh0459), and the conditional terminal in the SCTLs does not seem to be wired. When I watched the video that introduced this concept, loop a while turns out be replaced directly with a SCTL, whereupon the F constant (since the while loop) is automatically connected to the Terminal.

  So, my question is this: is it a good idea to leave the condition of the Terminal loop unwired in an FPGA VI? If so, what is the reason? Alternatively, is this SCTLs-specific behavior? If so, again, what is the reason?

  Thank you!

  Only in FPGA is fine.  The reason being that it is assumed the loop will only run for always in the material.  No no not the loop control registers some doors.

• Prevent the child class dependency when the conditional use disable to specify the class in the development environment

  Hello

  I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

  To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

  The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

  To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

  I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

  This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

  To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

  If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

  So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

  Thanks in advance

  John.

  I feel your pain.  I came across something similar some time back.

  Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

  I also much prefer the method you describe...

• Click on the button conditional and alert when the condition is not met

  Hello

  I have a problem with the click of a button; in my form when the user clicks on a button I have to run the True action only if an element has the value; otherwise I would show an alert message like "enter value < element >...". ».

  It seems a simple problem, I tried to insert the condition "Is not null" and warning that the action of false, but it does not work.

  Who is the Apex way to solve?

  Thanks in advance.

  Cry

  1. replace the button URL type

  Code - javascript:validate();

  2. create a javascript function in the page function and declaration of global variables

  function validate()

  {

  If ($v ('YOUR_ITEM_NAME') == ")

  Alert ('XYZ');

  on the other

  Apex. Submit ('BUTTON_NAME');

  }

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• e-mail when the condition meets

  Hello

  I have managed to get the code for the e-mail to a user, but I want to know where I can put the condition if it meets the specific condition for only then email? In addition, can I get the results in the body of the email also?

  DECLARE

  v_From VARCHAR2 (80): = ' [email protected] ';

  v_Recipient VARCHAR2 (80): = ' [email protected] ';

  v_Subject VARCHAR2 (80): = 'High CPU;

  v_Mail_Host VARCHAR2 (30): = 'server ';

  v_Mail_Conn utl_smtp. Connection;

  CRLF VARCHAR2 (2): = Chr (13) | Chr (10);

  BEGIN

  v_Mail_Conn: = utl_smtp. Open_Connection (v_Mail_Host, 25);

  UTL_SMTP. HELO (v_Mail_Conn, v_Mail_Host);

  UTL_SMTP. Mail (v_Mail_Conn, v_From);

  UTL_SMTP. RCPT (v_Mail_Conn, v_Recipient);

  UTL_SMTP. Data (v_Mail_Conn,

  ' Date: ' | TO_CHAR (sysdate, ' Dy, hh24:mi:ss DD month YYYY ') | CRLF.

  ' De : ' || v_From | CRLF.

  "Subject: ' |" v_Subject | CRLF.

  'To: '     || v_Recipient | CRLF.

  CRLF.

  "some text" | CRLF.    -Body of the message

  "more text of the message. CRLF

  );

  UTL_SMTP. Quit (v_mail_conn);

  EXCEPTION

  WHEN utl_smtp. Transient_Error or utl_smtp. Permanent_Error then

  raise_application_error (-20000, "cannot send an email: ' |") SQLERRM);

  END;

  /

  Thank you.

  Hello

  user8786417 wrote:

  I tired the code, but it has the following error:

  DECLARE

  v_From VARCHAR2 (80): = ' [email protected]';

  v_Recipient VARCHAR2 (80): = ' [email protected]';

  v_Subject VARCHAR2 (80): = 'High CPU;

  v_Mail_Host VARCHAR2 (30): = 'server ';

  v_Mail_Conn utl_smtp. Connection;

  CRLF VARCHAR2 (2): = Chr (13) | Chr (10);

  num_found PLS_INTEGER;

  BEGIN

  SELECT COUNT (*)

  IN num_found

  Select *.

  of CSD_CALL_RATING;

  IF num_found > 0

  THEN

  v_Mail_Conn: = utl_smtp. Open_Connection (v_Mail_Host, 25);

  UTL_SMTP. HELO (v_Mail_Conn, v_Mail_Host);

  UTL_SMTP. Mail (v_Mail_Conn, v_From);

  UTL_SMTP. RCPT (v_Mail_Conn, v_Recipient);

  UTL_SMTP. Data (v_Mail_Conn,

  ' Date: ' | TO_CHAR (sysdate, ' Dy, hh24:mi:ss DD month YYYY ') | CRLF.

  ' De : ' || v_From | CRLF.

  "Subject: ' |" v_Subject | CRLF.

  'To: '     || v_Recipient | CRLF.

  CRLF.

  "some text" | CRLF.    -Body of the message

  num_found | 'lines of qualification found in another_table "| CRLC |

  "more text of the message. CRLF

  );

  UTL_SMTP. Quit (v_mail_conn);

  END IF;

  END;

  Error on line 1

  ORA-06550: line 11, column 21:

  PL/SQL: ORA-00923: KEYWORD not found where expected.

  It's one of these error messages that actually means what he says.

  Each SELECT keyword must be followed by exactly 1 FROM keyword, like this:

  SELECT  COUNT (*)

  IN num_found

  FROM another_table

  WHERE the cpu > = 100;

  In your code, you have the statement following (or the compiler will treat this as a single statement because he has only a semicolon):

  SELECT  COUNT (*)

  IN num_found

  Select *.

  de CSD_CALL_RATING;

  It is 2 SELECT keywords but only FROM 1.

  In addition, whenever you SELECT in PL/SQL, youhave to specify what you will do with the results (e.g., SELECT... ( IN).

  How to fix the code depends on what you want to do.  I don't know what you want to do, so I can't help much.