Not transmitted after validation of the conditions

Similar Questions

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• Qosmio G50 - 12 q - Vista does not load after you connect the external USB keyboard

  I could acquire an enermax acrilux usb keyboard and have connected the keyboard taken 12 q at the same level where another keyboard was attacked the qosmio g50 usb and it worked without problem.

  After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista Ultimate edition and the inside wheels have been activated.
  Never happened before. I doubted the enermax

  Reconnected to the position of the qosmio USB, there on the back not granted to start-up of turbines problems
  As the enermax, that he has never blocked the startup of the operating system and to activate turbines also have plugged into the same USB port to which priority was connected a keyboard?

  Tank you

  Hi mate

  Sorry, but you message I am really hard to understand
  What I understand is that you connected an external keyboard on the Qosmio and now the laptop will not boot properly. Is this good?

  What to say; Maybe you disable USB legacy mode in the BIOS.
  Please check this!
  To enter the BIOS press F2 and everything by turning on the laptop.

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you

• Windows Vista does not start after you use the Hp Recovery Manager. What should I do?

  I used Recovery Manager to reinstall Windows Vista Basic 32-bit. During installation, it shows 0% completion although at the end it says everything is ok. After clicking on the button finish, he starts up the Recovery Manager again asking if I want to recover Windows. If I choose the Cancel button it restarts with the same Recovery Manager screen. What can I do?

  You can call HP technical support at 1-800-474-6836. Or you can give your product number, not the serial number, and I'll try to send you the link to order yourself.

• Memory of the computer on the Local C drive does not increase after deleting all the photos and the video.

  On my computer, the operating system is Windows Vista Home Premium. I am facing a problem, in which case, the amount of gigabytes, on the Local C drive.

  does not increase after remove/delete all the photos and video to my computer.

  I've done a disk cleanup.

  Any help will be greatly appreciated.

  Elliott R.

  Hello

  Check if the files that has been deleted and still resident in the trash, if so, empty the trash.

  http://Windows.Microsoft.com/en-us/Windows7/permanently-delete-files-from-the-Recycle-Bin

  Method 1;

  I suggest that you run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Test the issue in a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Parental control locks not computer after expiry of the period

  I don't really understand this behavior to parental control. Parental control is useless if it cannot lock the computer or log off the user after expiry of the time. I noticed that when I expected that after time my child will be locked or logged on but to my surprise parental control didn't do. What is interesting, the deadline has been extended up to an hour more, and that extra hour at the end there deadline extended for another hour more! restricted user is 'standard user' where it can extend the time.

  I'm doing something wrong? What can be the cause of this? Is this normal parental control feature. If it's normal, I don't really see the point of its use.

  I found that my problem with users not been disconnected after an expiration time has been associated with the Gigabyte Easytune software. When I removed this software everything was back to normal. If children can ovveride delay if they have this software installed :)

  Microsoft who discover!

• Edition on DVD after using the movie menu.  Text of scene selection will not update after clicking on the advance button.

  I created a movie and used the Menu movie option.  I have 24 scenes.  After having engraved on a DVD the DVD will not update the text or the images listed by backstage after clicking on the button to move to the next series of scenes. However, if you click on the scene it will take you to a scene that should be on a page.   I use first elements 13 Windows 8.1 with 16 GB of RAM.  I tried different a few times and still have the same problem.  Thanks for your suggestions!

  I found my problem.  I got the Motion Menu button checked on each marker of the scene.  After that take-off it works perfectly.

  Randall

• SQL does not recharge after analysis of the table

  I run DBMS_STATS.gather_table_stats to scan the table but linked SQL does not charge, it still make a bad sql plan.
  When I do a grant on the table, the reloading SQL and make a good plan sql.
  Why not recharge after table SQL analyze?

  If you specify AUTO_INVALIDATE, you tell Oracle expire over time sliders (I think 30 minutes is the default window, but that might just be dependent on version). If you want the sliders to expire immediately, you will need to pass the FALSE value.

  Justin

• Automatic resizing of the pop-ups of sizing does not correctly after you convert the project RH9 RH10 until.  Any ideas?

  We went just at RH10 (upgrade came with the Adobe Technical Communication Suite 4 upgrade).  We have successfully converted four projects that had come from RH9 to RH10.  I think my only problem is that all my popups that have been configured to open it in the topic as "display in the sizing Auto popup" are open as if they were under "default page" (see image map screen below):

  

  We run IE9 and Windows 7 ops system browser.  These pop-up windows worked well and is size so that we can click out of them and go back to the main topic before we converted the project.  ANY IDEAS?

  P.S. I tried already to remove the option of automatic resizing of popup display, then by saving the topic, then change back and nothing happened.  I do not change my css or the master page that popups were assigned and that worked before the conversion.

  Thank you!!  I wonder if I'll have to redo any mapping of the image to each of the popups in order to get the autosizing popups to work.  Please notify.

  Post edited by: DNCopeland I discovered another employee who has already climbed to the RH10 could open the same project and see the pop-ups that open as automatically resized for her, not as a page by default the entire window because they are for me.

  Sorry to barge here, but I wanted to pass along my experience with this bug.

  I found this automatic resizing (or custom also) pop-ups in image maps have been works well in Rh9 and broken in Rh10 in the Topic Previewer (glasses icon) BUT NOT in the real WebHelp output.

  Yes, DHCopeland, are statement that you see in the viewer section, or have tried to generate and display in actual production?

  I always test if there is no improvement after installing 10.0.1 HR patch. So far, it seems that the patch does not address this bug. I'll try another machine.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.