Find CS4 (Mac) of the installed product?

Similar Questions

• The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.

  Hello

  I'm not able to uninstall Skype on my laptop which is having windows 7 OS.
  It gives below error.
  The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.
  He appreciates if there is someone to support for this issue.
  Thank you
  Sandesh

  Hi Bader,

  Thanks for the kind reply. In fact before checking your response, I checked in my system there was the .msi from the Skype software installation file was missing. so I installed the same version installation file and then uninstalled the software.
  And I have installed the latest version of the Skype software.
  Thank you
  Sandesh

• Where can you find your windows when the sticker product key has been through?

  I reinstalled Windows Vista after a hard disk failure by using the recovery disk Toshiba OEM to restore on a new hard drive, Windows application product key now, but the label under the laptop is worn out - what should I do?

  The manufacturer recovery media should not require the entry of a key.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please
   
  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• The installed Adobe Media Encoder product has not been activated.

  My Adobe Media Encoder CS4 worked perfectly.

  I exported even a video one morning and afternoon, he refused and gave me the following message:

  "Thank you for using Adobe Media Encoder CS4.". The installed Adobe Media Encoder product has not been activated.

  Please launch and activate this Adobe product before continuing to use Media Encoder"

  I reinstalled a couple of times, but nothing has changed.

  I uninstalled and installed CS5, it launched once and then gave me the same message all over again.

  I even tried to install it on another computer and it gives me the same result.

  I have worked on this video more a month, and I can not export it.

  Can anyone help? I have a deadline to meet

  Thank you very much

  Go to:

  C:\Program Files\Adobe\Adobe Media encode CS6

  remove the amtlib.dll

  Reach:

  C:\Program Files\Adobe\Adobe Premiere Pro CS6

  amtlib.dll copy from there to:

  C:\Program Files\Adobe\Adobe Media encode CS6

  If you are using 32-bit versions or earlier version CS6 then choose the correct folders for your case.

• What are the new products by apple

  What are the new features that are available on the market designed by apple. Other than the products of hardware its iPhone, the smartphone and the Tablet I want to know about the software of the computer and online services.

  Here you can find official information on the new products http://www.apple.com/newsroom/

• CS4 Mac: insertion of PayPal buttons?

  Hello.  I have a Mac user who needs to be able to create specific PayPal buttons for new events and update a web page with the new button, as the event is approaching.  Is this possible in Contribute CS4 Mac?  The user creates the PayPal button and cut-and-paste the code, or do it in CS4?  I've seen references to a WebAssist.com Toolbox, but it seems that the Toolbox requires Dreamweaver, that the user does not.

  The user has currently Contribute 3 on Snow Leopard and it crashes, so I need to improve it soon.

  Thank you

  David

  Yes, you need not to WebAssist.

  Contribute uses the PayPal buttons which are created by WebAssist. In my view, this has been integrated with Contribute. Therefore, Contribute help may refer to WebAssist.

• just switched from pc to mac and the need to install Lightroom 4.  Can't find the link on Adobe's Web site.

  I bought Lightroom 4 a few years for my pc.  I just bought a Mac over the weekend and want to install Lightroom 4 on my new computer, but can't find the link on Adobe's Web site.  I try to avoid having to buy the program again.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• I bought the box of the product Adobe Photoshop CS4 in 2009 and installed in my iMac. I plan to buy a new Macbook Pro and I am curious to know if I can still install my Photoshop bought in my Macbook?

  I bought the box of the product Adobe Photoshop CS4 in 2009 and installed in my iMac. I plan to buy a new Macbook Pro and I am curious to know if I can still install my Photoshop bought in my Macbook?

  Yes, your single-user license allows up to two simultaneous installations, activations.

  to install and activate a third you would need to disable (help > deactivate) on one of the other two.

• Serial number problem: I am installing Lightroom 4 on my Mac, but the Adobe web site will not recognize the 18 digit serial number.  He wants more.  What to do next?

  I try to install 4 Lightshop on my Mac, but the process of license Adobe will not recognize the 18 digit serial number.  What should I do next?

  Adobe has no set of 18 digits.  It is perhaps a number of redemption.

  your serial number is a 24 digit number composed of 6 groups of 4 numbers, find the serial number of your product Adobe quickly

• Unable to find PDF printer after I installed Mac CS6 in my MacBook Air... Please help ~.

  Hello... Unable to find PDF printer after I installed Mac CS6 in my MacBook Air... I had CS4 (Windows) before, but it comes with the printer PDF ~ can anyone help? Thank you...

  What is done on the Mac, is to use the PDF button in the print dialog box, and then select SAVE it in ADOBE PDF drop-down choice. This is equivalent to printing to a postscript file and running through Adobe Distiller.

• HELP to the installed print head is not intended for use this product, or it may be damaged

  Help - please, I get a msg that says: "the installed print head is not intended for use in this product, or it may be damaged. I was trying many solutions I found on my search but nothing doesn't work.

  I was able to find the right answer to the problem I had with my printer. The printer that I have by the way is a HP Officejet 6500 E709a model.

  Here is the solution is simple:

  The print head is the device where sit the ink cartridges.  It may be incorrectly installed.

   

  Remove the ink cartridges (carefully, you can get ink on yourself).  Now using the system of grey lock on the right side of the cart, remove and re - install the print head.  Shake a little before lowering the lock wall.

   

  Now, re - install the ink cartridges.

  
  I had to do this process 2 times because the first time did not work. Make sure that when you remove the print head, the area is clean, try to remove the very careful, a little dust and I hope it will work for you also.

• Find the Windows product key (Acer Aspire 54T 1-471 T - R3)

  I had Windows 8 when I bought this laptop. I have upgraded to Windows 10 later. Recently, the laptop gave trouble when installing an update Windows 10 (specifically KB3172729). Right now, it does boot to Windows at all and I'm looking to do a clean install of Windows 10. The problem is that I don't have the key. Is it possible to find the key for Windows 8/8.1/10?

  (a) it may be possible that the OEM key is embedded in the system BIOS of the laptop that can enroll in a new installation of eitehr o/s. If you went with the charging OF THE SAME PRODUCT VERSION as it was delivered on your laptop, the registration must be done automatically

  (b) If you have opted for a different version of prodcut is an upgrade, if can pick up your key (from BIOS) as part of the upgrade process

  (c) If you can get the operating system to start, even in "safe mode" so that you reach a CMD command prompt, you can run CMD as administrator and enter the command:

  WMIC path softwarelicensingservice get OA3xOriginalProductKey

  which will display the key OEM so you can keep in your records.

• At startup my computer insists on trying to load Deputy of the HP product, which she is not present and must be on a CD to be inserted. I've never had a CD and I can't find a download of HP?

  need to find a place to download hp product assistant

  Did you just install an HP printer? If so, put the CD in when prompted. If not, then stop any programs starting with Windows and claims the companion product.

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Thumbnail of Mac in the Finder desaturated compared to open Image

  I have worked with a few photos and have a problem with what is probably something related to color profiles.

  When I edit a photo and save it (same results for .psd, .jpg, and .png), the sticker I see when you search for files in the Finder on Mac looks very desaturated compared to what the image looks like when opened in Photoshop or preview.

  If I send the picture to me and look at this topic on my iPhone, the same problem persists. The image seems desaturated by looking at a picture that has been received, until I opened the full image, and color is then "restored", so to speak.

  The thumbnail looks like what the image looks like to in Photoshop, if I have to 'check' display > proof colors option. However, I still want pictures to look the same on any device, whether it is a miniature of the Finder or open in Preview/Photoshop.

  You have any suggestions to solve this problem so that the image looks consistent across all viewings of it? Because the image seems to always watch says when it is open, I don't think there will be problems printing. However, it is certainly a problem annoying having. Thanks in advanced for any help you can provide.

  When you proof in monitor RGB, you disable display color management chain temporarily. That's what it's for.

  IOW, the document RGB values are not converted in your monitor profile, according to the guidelines of behavior PS normal, but are instead sent directly to your screen without any correction. That is how to manage without color applications behave, and Photoshop mimics this behavior in evidence in Monitor mode.

  In other words, again, this is how you can tell if an application/environment is color managed or not.

  All this assuming that you have a valid Photoshop monitor profile to use, installed on your system. A valid profile is one that accurately describes the actual response of the screen - such as one made with a good Stallion. Generic/manufacturer profiles are still few reliable.

• I have Photoshop CS6 for Mac, has been installed on the computer that is dead, need to install on the computer Mac with no DVD player, how to uninstall on dead computer and install on the new computer?

  How to install Photoshop CS6 for Mac on the new Mac computer without a DVD drive?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  You can contact the Adobe Support via chat and have them reset your activations ensure that related to the dead machine becomes available again.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp