Find/multiple changes in one step?

Similar Questions

• Change the duration of multiple clips "as one" clip together?

  Here's my situation:

  I have a song to 127 BPM. I have a music video (muted) to 125 BPM.

  I spent a long time cut out excerpts of the video channels and muliple clips to form a chronology (but with a lot of clips and channels lined up).

  I now want to change the total length of the video clip to match the TEMPO of the song (which I should have done in the first place), but the video is, as noted earlier, sliced upward in mulitple clips in multiple channels. How do I change the duration of all the clips at the same time, where the end and the beginning of the clips still line up to eachother?

  It would be incredibly easy if there was a function non-breeders. Where can I nest multiple clips, change the duration and the UN - nest clips from clips of an overall duration slices changed. (Which is not possible. Yes, I can drag out of the nested charger clips, but the clips will still have the initial term).

  TL; DR: How can I change duration of multiple clips "as one" clip together?

  Never mind. I found an alternative solution. I used an expandable calculator at http://mp3.deepsound.net/eng/samples_calculs.php and time stretched all the clips to match the TEMPO of the song. Now I just need to break all the clips, which can be done one by one, but I found this trick to snap all clips at once: http://vimeo.com/27428526.

  I'll just let this thread remain open for each other with the same problem can find it

• Screen fade slowly when changing from one page to the other

  Original title: melted screen

  Why my not to screen a slow fade when changing from one page to another.  Did not until recently.

  Hello

  1. what operating system is installed on your computer?

  2 are. what page you referring?

  3. when exactly are you facing this problem?

  4. have you made changes on the computer before this problem?

  If you use the Windows 7 operating system, you can follow the methods.

  Method 1:

  You can see the issue in the clean boot state. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  I suggest you run the calibration of the colors of the display on the computer and check if it works.

  Calibrate your screen

  http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

  Method 3:

  You can run the troubleshooter of display quality and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 4:

  You can try to update the display adapter driver by visiting the manufacturer's Web site to download and install the latest driver package.

  For more information: update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  It will be useful.

• drag multiple layers from one document to another

  When I drag multiple layers from one document to another, now the keys ctrl-shift-alt (that is placed exactly in the same place) Photoshop changes the selected layers. He eithers add a leyer or just pass.

  He wants me to drag a segment of the leyer where there is 'information' or pixels.

  I drag in the document itself, not the layerpanel.

  In previous versions, it wasn't like that.

  Sometimes there is a very little information or pixels in a layer. This is way hard to aim straight for photoshop to do what I want it to do.

  I don't know if it's done on purpose or it is a very annoying bug.

  Photoshop 20151114.r.301x64

  win10 64-bit x 64-proc

  Intel i7 - 4770 s 3.1 GHz

  24 GB RAM

  SSD

  Well, it is quit interesting: while we are working on this problem, I advised a new update for photoshop: some problems occurred with the last update.

  I was working with 20151114.r.301

  And now I have the 20151209.r.327 version (which comes in fact in a few minutes ago)

  I tried the same thing as above and now my problem with the sliding of the layers went!

  So it was a bug. Nothing to do with the settings or anything.

• How to find who changed his mind?

  Can we know how to find "* who changed a view given in the database? ' * ' as username, computer name, or same OS user name nay thing at least one of them, if not all.
  
  When I checekd with
  SELECT last_ddl_time FROM object where object_name =: object_name,.
  I found his altered 5 days back.
  
  Any help would be appreciated.
  
  Thank you.

  Hi again: P.

  The only way to do this is you has BEEN verified this point of view.

  You can do this for next time by using the following procedure.

  http://www.Oracle-base.com/articles/10G/Auditing_10gR2.php

  Kind regards

  Mario Alcaide
  http://marioalcaide.WordPress.com

• Why do you have my emoticons change from one day to the next and how can I get the 'old'?

  The choice of emoticons changed from one day to the next. I would like to have the 'old'. Why Gmail does not send a msg Heads Up? Thank you.

  Hello

  This does not sound like a Firefox problem, but a change that was made to Google for their e-mail service. I recommend that get you in touch with them through the channels of Gmail support and they may be able to help.

• How to move photos from multiple folders into one

  Hello!

  I exported photos of iPhotos to a folder on the Mac.

  He saved every moment in different folders.

  I want to combine them all, so that all the photos are in a single folder.

  How can I combine these multiple files from multiple folders into one?

  Thank you very much for your help!

  (PS next time I will not include fracture m´by moments, but for now, how do I fix?)

  Drag and drop one folder to the other.

• How to find or change the voltage setting set in a series of HP TouchSmart IQ500

  How do I find or change the voltage setting set in a series of HP TouchSmart IQ500 (specifically an IQ524)

  It does not use an external power adapter? If so, all you need to use in another country is an adpater sheet to match the wall outlet.

• Fix REQUIRED emergency AID - one-step downloaded Windows Update solution, and now my system is not usable

  I downloaded the solution in a single step, which has been linked to another thread. Now my system is virtually unusable. After that I restarted as part of the installation, all my settings are different - including the wallpaper, all the gadgets.

  I have no access to the Internet (using another machine now). Any program or icon I try to access it, I get a message: "Windows cannot access the specified device, path or file. "You don't have to permisisons appropriate to access the item"-this message appear practically after I click on any icon.

  HOW TO UNINSTALL THIS "DIFFICULTY OF THE STAGE" MY MACHINE? HOW CAN I MAKE USABLE AGAIN?

  At this point, I hate VISTA so much you have no idea. I tried for 8 hours today to solve various problems with Windows Update and at this point, I'm really frustruated.

  Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2) when you post in a forum or a newsgroup. Please do it in your next reply.

  What problems do you think that the 'ONE STEP FIX' could solve?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I have multiple images in one frame in movie maker?

  Hello

  I would like to know how I can include multiple images in one frame in movie maker?

  Thank you.

  It would be useful to know exactly what you want to create.

  You can prepare the images in an image editing program
  before you import into Movie Maker.

  Picasa free software can make collages:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Picasa
  http://Picasa.Google.com/
  (for Windows XP/Vista/7)

  Tutorial Picasa: Collages: creating a montage
  http://Picasa.Google.com/support/bin/answer.py?hl=en&answer=19539
  (Photo battery option would be worth)

• what I do move each photo in windows movie maker or can I just move the entire folder in one step

  I have 150 photos that I want to load in Windows Vista Movie Maker. They are all in a folder. What I need to move each photo in windows movie maker or can I just move the entire folder in one step. In other words to move the entire folder and it will enter in each space and also if I use the same transition and effect, can I just do it in one step instead of indiviualizing each photo? Try to reduce the huge amount of time to make this DVD with music (dvd composeepar)

  Select a photo and type Ctrl + A to select
  Everything on the left then click on the import button.

  ... Choose a photo in the Collections
  pane and type Ctrl + A to select all, then left
  Drag the group to the timeline.

  Now... to... Storyboard...

  Select a photo and type Ctrl + A to select all...

  Reach... Video transitions...

  The Transition you want in all the pictures right click...
  In the menu... Choose... Add to storyboard table.

  You can do the same thing with effects...

  Now... Publish your project.

• Move multiple files from one folder to another in SkyDrive?

  How can I move multiple files from one folder to another in SkyDrive?  When I click on a file, & then use CTRL-click on another file, it moves to that one.  Can I select multiple files & copy or move or rename on PC?

  For now - not.  SkyDrive Wave5 or anyone should have this ability when it is fully released.

  http://www.LiveSide.NET/2011/09/06/SkyDrive-wave-5-to-finally-support-multiple-files-selection/

  (Read and also read comments on things, you might be able to use now to accomplish what you want).

• I can't find "Recently changed." Where is he?

  original title: "recently changed".

  I used to find photos to insert into the e-mail message with minor changes, then use "Recently changed" to go for them. Now I can not find "Recently changed." Where is he?

  You are referring to the research?

  C:\Users\your name\Searches\Recently Changed

  Missing from the directory? I can click with the right button on the files in this folder and paste it into Microsoft Outlook.

  Or if the link "Recently changed" is misssing go Explorer under "favorite links", try this:

  There is a line between 'Favorite links' (or missing too?) and 'Files' (left pane), place your mouse cursor on the "folders" (light blue) bar top, the cursor should change to a double-headed arrow, click and drag the border down, you should now see the "recently changed" and other links (in blue).

• permissions changed on one of the partitions on the hard disk

  Some time ago I had to restore my computer to an earlier version. and for some reason, the permissions changed on one of the partitions on the drive hard to the point that I can't change anything EITHER and I don't know how to get back to full access.

  Former title: modified permissions

  When you follow the guide on this page, you can set the owner to yourself, as long as you are signed in under an administrator account. However, this will not work if the file or folder is encrypted.

• All my programs has changed to one. LNK file and does not work HELP! Read for complete problem.

  All my programs has changed to one. LNK file when I tried to use open with an old paint of the folder, what do I do to get my office and all running programs corectlly? P.S. I have a group policy that blocks almost everything so there needs to be a simple solution that doesn't invole running of any application.exe because all the easy fixes are blocked by my admin that involve changes to the computer. The best way to resolve this would be to do a system restore to the day before, he got past, but which is also blocked. Help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.