permissions changed on one of the partitions on the hard disk

Similar Questions

• Why the HARD disk is partitioned into C & D on Satellite Pro C partition

  Why the HARD drive is divided and how to use it?

  It is important that the one that I use?
  It turns into one big disk?

  The manual says nothing about this.

  Thanks for any help

  Ken

  Hello

  The HARD disk is partitioned and contains two partitions. The C partition is the system partition that contains the Windows operating system. The second D partition contains data drive HARD recovery.
  HARD drive recovery allows you to establish the notebook back to factory settings without the recovery disk usage.

  But it s is strongly recommended to create the recovery disk! The user manual provides the info on that in case something goes wrong with the HARD drive, the recovery disk allows you to recover the laptop.

  Of course, you can delete the D partition if you want to, but before doing so, you must create the recovery disk.

  However, my HARD drive contains 3 partitions. I created an extra. In my case, the C partition contains only system and the unique software. My files private like Mp3, movies, etc. are placed on the D second partition).
  The third partition (E) contains a folder with games.

• Why the hard disk is divided into partitions of two data (C:Vista and E: Data)?

  I just started a new A200-1V0 and found that disk space is divided into two partitions of sizes equal 'C:Vista' and ' E: Data "(and a small one EISA).

  WHY? What is the logic and purpose? It's not even as if the C:Vista partition is smaller and intended only to the tricks of the 'system' as the root 'Users' (user Documents) is on it also.

  This is the default for Vista (my first use of it), if not, who said that Toshiba could do this without asking me?

  How can I move the root 'Users' in Vista (in the data partition) - if I have two partitions that I might as well use it?

  I can resize partitions in Vista without a utility 3 rd-party (or a complete backup/restore)?

  Thank you

  Hello just YOU

  Please don't be offended because there is no reason for this. You bought the new product with the factory settings. Toshiba and other hardware manufacturer do not know every customer personally and, unfortunately, it was not possible to ask YOU how to set up YOUR laptop.

  Because of this, there is a recovery of product support that allows to configure the HARD disk according to your wishes and needs.

  Please use this DVD and install OS how you want it to be. What recovery procedure starts, you will see CONFIGURATION option on the right side. Click on it and choose the right option.

  Reinstall the OS and enjoy your life. Really, I don't have the time to write on the floors of two partitions, because this is basic stuff and you probably don't want to waste your time to read this.

  Bye and good luck!

• How to recover files from the hard disk recovery partition?

  There are recovery (D) on the hard disk.  How can I recover all my old files and programs of this drive?

  Original title: I changed from Vista Ultimate to Windows 7 operating systems.

  Hello sdf361,

  The recovery partition, that is what you would use to restore your computer when you bought it with the OS on it
  that was pre-installed. It is not your old programs and data on it. You will need to backup your data to restore and install
  your programs since the original installation discs.

  If you do not have the program disk, I suggest that the manufacturer of the computer.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Could not open the drive or one of the snapshot disks it depends on.

  My becomes partition error "Cannot open the disc or one of the snapshot disks it depends on." and will not run. I could use some help, and after searching for similar entries in the support community, I decided to post my file "supported".  Any help would be appreciated.

  My com: MacBook Pro with Snow Leopard version 10.6.4

  Partition: Windows 7 Ultimate 64-bit

  Take a look on: Boot Camp virtual machine fails to power on

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• Cannot change the HARD disk parameters in the Bios on Satellite A200

  I can't change the hard disk parameters in the bios for my satellite A200-1The
  This bios does not support changing the parameters of the hard disk for example SATA to IDE?
  BIOS version is: 5.6

  AFAIK in BOS advanced settings you can change mode SATA controller only. You can use the AHCI mode or compatibility.

  I put t understand why do you think you can use IDE mode. What you want to do exactly?

• Re: Satellite Pro A40 - can I change the HARD disk or the same model?

  Hi Forum,

  do I have to wait for safe trouble by changing the hard disk between the following laptops:

  old or damaged laptop:
  SPA40 model PSA45E - 0013T - number GR
  Series No. 34127882 H

  new/own laptop
  SPA40 PSA45E-001VM-GR model number
  Series N0.34117607H

  Thanks in advance for your advice

  Concerning

  You can do it. No problem at all. Hard drives are not specific model of laptop parts and with hard drives is important compatibility.
  On the new laptop, which you can use different hard drives. Important is that use you compatible HARD drive.

  Just do it. After Exchange of HARD drive install Os again and everything will be OK.

• Help - need to consolidate the partitions on the hard disk after system recovery

  There are 4 partitions on my laptop Lenovo w/Vista. They are the main with the system OS etc. files partition, then an extended 9.7 GB partition labeled volume D: 98 GB of unallocated space and then finally the OEM with the recovery image section. I want to create a partition that is important as the C: volume with all that on it. The only other partition would be the volume of the OEM. Now when I try to use the unallocated space (create a simple volume with quick format) it says the operation cannot be completed because there is not enough space on the hard drive; that cannot be true because the unallocated space is 98 GB +. I got the OS to the factory setting thinking that it would be re - format the hard disk for the installation of 2 original score. No luck. I need help! We cannot add a lot of apps of software in the form of program files before the C: drive runs out of space. Help!

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/95190cc5-B448-4a93-98ed-9a1e5c2354fb

  Answered in the other Forum.

  Mick Murphy - Microsoft partner

• How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?

  shrink the volume c: http://www.sevenforums.com/tutorials/2672-partition-volume-shrink.html

  Then create a new volume u want http://www.pcandtablet.com/windows-8-drivers/1216/how-to-extend-volume-in-widows-8-and-take-extra-space-for-a-drive.html

• When I tried to power on VM ends up in the right error: the specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  I stop a virtual machine after a certain time, I tried to power. Its has ended up in the following error message

  Reason: The specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.

  The machine was working fine before the closure.

  In the data store, the file type of the virtual machine is 'file' instead of 'virtual drive '.

  Help, please

  You are missing the file descriptor hard. The xxxx - flat hard is the file that contains the data effectively. But the xxxx.vmdk is missing, which is a text file that connects to the flat file.

  AWo

• Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

  Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

  I have attached the log file and the list of files in the folder of servers.

  Any help much appreciated.

  Welcome to the community,

  This virtual machine successfully powered on since July 23?

  To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

  If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

  replacement of

  scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

  with

  scsi0:1.filename = LHMU - VIC04_1.vmdk

  then right-click on the vmx file in browser data store and add it to the inventory.

  Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

  If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

  If you are not sure, please post back before doing anything.

  André

• Could not open the vmdk disk or one of the snapshot disks it depends on

  I upgraded vmware fusion 1.x to 2.08, because I was getting the message

  Cannot open disk - hard or one of the snapshot disks it depends on.

  Reason: Cannot lock the file.

  So I thought that would fix it, but it didn't. I can't figure out how to fix it either. At home, I'm a PC user and use VMware player, but at work, we use Mac OS X and the merger.

  Here ARE THE CONTENTS of my VMX file

  ____________________________________

  . Encoding = 'UTF-8 '.
  config.version = '8 '.
  virtualHW.version = "7".
  MemAllowAutoScaleDown = "FALSE".
  pciBridge0.present = 'TRUE '.
  insulation. Tools.hgfs.Disable = "FALSE".
  deploymentPlatform = "windows".
  virtualHW.productCompatibility = "hosted".
  RemoteDisplay.vnc.port = '0 '.
  Tools.Upgrade.Policy = "upgradeAtPowerCycle".
  powerType.powerOff = 'soft '.
  powerType.powerOn = 'soft '.
  powerType.suspend = 'soft '.
  powerType.reset = 'soft '.
  gui.exitonCLIHLT = 'TRUE '.
  displayName = "WindowsXP_IE7."
  NVRAM = "WindowsXP_IE7.nvram."
  memsize = "664".
  guestOS = "winxppro.
  Sound.Present = 'TRUE '.
  sound.fileName = "-1".
  Sound.AutoDetect = "TRUE".
  sound.startConnected = 'TRUE '.
  USB. Present = 'TRUE '.
  EHCI. Present = 'TRUE '.
  USB. Generic.AutoConnect = "FALSE".
  ide0:0. Present = 'TRUE '.
  ide0:0. FileName = "winxp - 000001.vmdk".
  ide0:1.present = 'TRUE '.
  ide0:1.startConnected = 'TRUE '.
  ide0:1.DeviceType = "cdrom-raw"
  ide0:1.AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.
  ethernet0. ConnectionType = "bridged".
  ethernet0.startConnected = 'TRUE '.
  ethernet0.wakeOnPcktRcv = "FALSE".
  floppy0. Present = 'TRUE '.
  floppy0.startConnected = "FALSE".
  floppy0.filetype = 'file '.
  floppy0. FileName = ' / Users/user/Library/Parallels/winxp/unattended.fdd '.
  floppy0.clientDevice = "FALSE".

  ethernet0. AddressType = 'generated '.
  UUID. Location = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  UUID. BIOS = "56 4 d a7 74 d0 99 9 c - d2 70 b1 d0 25 18 9 c 5A ac"
  extendedConfigFile = "WindowsXP_IE7.vmxf".
  ide0:0. Redo = «»
  pciBridge0.pciSlotNumber = "17".
  ethernet0.pciSlotNumber = "32".
  sound.pciSlotNumber = "33".
  ehci.pciSlotNumber = "34".
  ethernet0.generatedAddress = "00: 0C: 29.6 d: 01:00.
  ethernet0.generatedAddressOffset = '0 '.
  ide0:1.filename = "automatic detection".
  tools.syncTime = "FALSE".

  checkpoint.vmState = «»

  sharedFolder.option = "onetimeEnabled".
  sharedFolder.maxNum = '1 '.
  sharedFolder0.present = 'TRUE '.
  sharedFolder0.enabled = 'TRUE '.
  sharedFolder0.readAccess = 'TRUE '.
  sharedFolder0.writeAccess = 'TRUE '.
  sharedFolder0.hostPath = ' / users/person/SharedVMWare.
  sharedFolder0.guestName = "SharedVMWare".
  sharedFolder0.expiration = "never".

  pciBridge4.present = 'TRUE '.
  pciBridge4.virtualDev = "pcieRootPort"
  pciBridge4.pciSlotNumber = "21".
  pciBridge4.functions = '8 '.
  pciBridge5.present = 'TRUE '.
  pciBridge5.virtualDev = "pcieRootPort"
  pciBridge5.pciSlotNumber = "22".
  pciBridge5.functions = '8 '.
  pciBridge6.present = 'TRUE '.
  pciBridge6.virtualDev = "pcieRootPort"
  pciBridge6.pciSlotNumber = "23".
  pciBridge6.functions = '8 '.
  pciBridge7.present = 'TRUE '.
  pciBridge7.virtualDev = "pcieRootPort"
  pciBridge7.pciSlotNumber = "24".
  pciBridge7.functions = '8 '.
  vmci0. Present = 'TRUE '.

  MKS. Enable3D = 'TRUE '.

  ethernet0.linkStatePropagation.enable = 'TRUE '.

  Marked as supposed to answer

  André

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary