find on a query page breaks

Similar Questions

• Have laptop Intel and impossible to find a page break

  Try to see how the page break in a WordArt object

  As far as I know, "Word Art" is a feature of Microsoft Word.  The location where you will find the "insert a page break" differs according to the different versions of Word, but for recent versions, it is as described here:

  https://support.Office.com/en-us/article/Insert-a-page-break-7613ff46-96e5-4e46-9491-40d7d410a043

• Find page breaks

  I use FrameMaker 9, but I think that it is a question that would be useful to other versions as well.

  I inserted a few manual page breaks using special > Page Break. Now I want to look up these page breaks, then remove them. The Find/Replace dialog box does not page breaks.

  Is there an effective way to find page breaks?

  Here's a way to remove overrides paragraph tags manual page break, while retaining all other substitutions.

  This savings find you every single instance, however, you should know for paragraph tags property must be set to zero.

  (1) select a tag paragraph in paragraph Designer.

  (2) set all of the properties of paging to "such what."

  (3) set the paging - start the property "Top of Page" and click on apply. When FM asks, click "keep substitutes.

  (4) again once, set all the properties of paging "such what."

  (5) the pagination - start property 'Everywhere' and click on apply. When FM asks, click "keep substitutes.

• How the page break to each Department and calculate totals for Department

  I have a stored procedure that queries our sql database and returns the name of the employee, their Department, and a few other calculations. I use CFDocument to create a table and view the results. Here's the code that does this (see below) what I have to do is find a way to create a page break after that I have show a total for each column in each Department. My questions are so
  
  1. How can I insert a page break after the end of each service
  2. just above the page break, how to calculate the totals for the Department and display them?
  
  < cfdocument format = "pdf" >
  < table width = "650" border = "1" >
  < cfoutput query = "getResults" >
  < b >
  < td > #EmpName # < table >
  < td > #Dept # < table >
  < td > #JobType # < table >
  < td > #NonBill # < table >
  < td > #NonBillMeter # < table >
  < td > #NumberFormat ((NonBillPercent*100),.00) # < table >
  < td > #Bill # < table >
  < td > #BillMeter # < table >
  < td > #NumberFormat ((BillPercent*100),.00) # < table >
  < /tr >
  < / cfoutput >
  < /table >
  < / cfdocument >

  If I remember correctly, the tag you want is cfdocumentitem. Also, you want to check the attribute of cfoutput group.

  The details are in the cfml reference manual. If you do not have one, has the internet.

• Insert Page breaks in Documents

  I need to insert page breaks in some documents and cannot find information on how to do it.  On win 98 it was control (enter) but this does not work on Vista.  Can someone help me on this stupid problem, please?  I would be Greatful SO I can at least do SOMETHING with Vista!

  Without knowing the program, it is impossible to tell you how to make a page break (they are all different).  Notepad or Wordpad supports the pagebreak feature (CTRL-enter as you say for Microsot Word {version today as well} and a few others that I wasn't aware that it worked in Windows 98 supplied "processing" programs more than it does today).  Maybe you were using a different program, and then (as Word or WordPerfect or Works or something like that).

  If you have no Microsoft Office (so do not Microsoft Word), then I strongly suggest you download the OpenOffice free at www.openoffice.org , which reflects a large part of the core functionality of the Office (with the exception of Outlook) and has a program called writer which is a program of processing excellent - better by far than what comes with Vista.  It can even open and work with Microsoft Office documents (even those of 2007 and I believe that the beta of 2010).  It will certainly have a page break function (as well as MANY other features that come with the office suites only expensive (but again, this is free and despite this, it is excellent).)  If you do not have Microsoft Office or another suite purchased offfice, then I HIGHLY recommend you download and use this set of programs instead of what comes with Vista (although there are times when what you really need is an option such as Notepad - cheap and Notepad is also good for making batch script files if you are into that sort of thing).  But if you do a real word processor, you must definitely pass.  If you go, try CTRL + entry for a page break and if that is not working then check page break in helping get the correct keyboard command - but I bet it's the same thing.

  Don't be too upset that this means that you need a 3rd party program "do something with Vista.  OpenOffice is so much better that it is not yet a comparison value.  The truth is that products delivered with Vista are just not as good as some of those available on the open market (be it for a price or sometimes free).  I happen to love Vista Center backup and restore (but it's really good in more expensive versions of Vista (business and above)- and yet, there is a 3rd best product part out there for that as well (Acronis: http://www.acronis.com/homecomputing/products/trueimage/ but it is not free).)

  There are some Vista programs that may be useful.  Some people use Microsoft Mail and Microsoft Contacts as long as their email client (and customer contact) - Although many who start this way switch to Microsoft Live Mail (it's a little better than Microsoft Mail), and of course, if you have Microsoft Office, you should definitely switch to Outlook (which is MUCH better, but it costs money that the Office is not free).  As a free alternative, many use Mozilla Thunderbird http://www.mozillamessaging.com/en-US/thunderbird/ as, yet once, it is a better product with more features and options (and it's free Unlike Outlook).  The program Microsoft Search in Vista is very good if you take the time to learn how to use wisely and has need of no alternative.

  Remember that none of these other programs would work without Windows Vista (or some other OS) behind it - so it does not serve an important purpose.  You wouldn't be able to post on this site without Vista and a browser.  If you use Internet Explorer, it's kind of like using Vista because version 7 comes with Vista and cannot be added or removed (it's part of the base OS) - If you're probably using IE8 that was the upgrade (and a value of upgrade).

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Insert Page breaks

  I need to take a PDF of a page and insert several page breaks. I use Adobe Acrobat Standard DC and can don't seem to find anyway to divide a page into several pages. What I've done is to convert the PDF to Excel and the fact that way, but the text is compromised, and I find myself spending a lot of time to change the overall structure of the document. It would be simpler to use Adobe Acrobat to keep the document exactly as it appears in the original PDF form and just break the page up with an insert of pages such as break in Excel. Any help would be appreciated.

  You can't just insert a page break in a PDF file. It is not intended to be edited in a way.
  If you have the original file then modify it and then generate a new PDF. If you have not then your best chance is to export the PDF file to another format (such as an Excel spreadsheet or a Word document) and then edit it and create a new PDF.

• Cannot find CSSSheet for the page.

  Hello

  when I'm downloading my Musesite I get this error: http://PUU.sh/n4hk6/a47631225c.PNG (Could not find CSSSheet for the page). For the moment, I found no information on this issue.

  Thanks for your help.

  Jan-Niclas

  Please see Re: Muse BREAK during publish. >

• The value "allow Page Break in content" during the execution

  Hello

  Some can help me setting the subform/table property "Allow Page Break in content" with javascript? I have a repeating table in a form and want only long tables to break after a certain height. Simple question but I guess that the answer is not. Cannot find anything whatsoever after searching for several days.

  Thank you

  Arvind

  Hi Arvind,

  I don't think you can set the page break in content 'allow' with JavaScript.  If you set allow a page break in the content on your table, and then you could add a subform that causes a page if the table is small enough to fit on the next page.

  You'd have to do in the event layout ready and update form in the ready layout structure can cause that it become desensitized because it weakens the event fires again.  This means that you must be careful to remember what caused the event.

  In any case, here is an example that should help you get started.  https://sites.Google.com/site/livecycledesignercookbooks/home/ForcePageThrow.PDF?attredire cts = 0 & d = 1

  Take a look at the layout event code: loan Subform1.

  Concerning

  Bruce

• CFHTMLtoPDF - page breaking

  I'm trying to force a page break in my PDF file with no no not a chance, I was wondering if anyone has a suggestions that could help.

  < cfhtmltopdf marginBottom = '1 '.

  marginLeft = '1 '.

  marginRight = '1 '.

  marginTop = '1 '.

  orientation = "portrait".

  pageType = "letter".

  saveAsName = "PersonsName" >

  < cfinclude template = "/ dsp_create_pdf.cfm" >

  < / cfhtmltopdf >

  dsp_create_pdf.cfm contains a loop, and I want to add a Page break before each heading title (to put it simply).

  BUT reading documents on cfhtmltopdfitem reads as follows:

  PageBreak: can be used to insert a pagebreak in the generated PDF file. Where < cfhtmltopdf > is used as a service, pagebreak will not work

  
  

  We WANT us cfhtmltopdf as a service, so how this is accomplished.

  
  

  CSS with < style p = "page-break-before: always" > < / p > DOES NOT work either.

  
  

  dsp_create_pdf.cfm:

  
  

  <! DOCTYPE html >

  " < html xmlns =" http://www.w3.org/1999/xhtml "lang ="fr"XML: lang ="fr"> "

  < head >

  wihout < title > My PDF page breaks < /title >

  < cfoutput >

  < / cfoutput >

  < style type = "text/css" >

  .PDF

  {

  font-size: 18pt;

  do-family: "Times New Roman";

  }

  < / style >

  < / head >

  <!--get my data-->

  < cfinclude template = "qry_websrg70.cfm" >

  < body >

  < div class = "pdf" align = "center" >

  < table >

  < b >

  < td align = "center" colspan = "3" >

  Title

  < table >

  < /tr >

  < b >

  < td align = "center" colspan = "3" >

  < cfoutput >

  #PersonsName #.

  < / cfoutput >

  < table >

  < /tr >

  < b >

  < td align = "center" colspan = "3" >

  < cfoutput >

  #NOW () #.

  < / cfoutput >

  < table >

  < /tr >

  < b >

  < td align = "center" colspan = "3" >

  < table >

  < /tr >

  < cfoutput query = "qLetter" >

  < cfswitch expression = "#CONTENT_IND #" >

  < cfcase value = "GRDIST" >

  < b >

  < td align = "left" colspan = "3" >

  <! - Page Break here - >

  <!-< cfhtmltopdfitem type = 'pagebreak' / >->

  < style p = "page-break-before: always" > < / p >

  < table >

  < /tr >

  < / cfcase >

  < / cfswitch >

  < b >

  < td align = "left" >

  < u > #data1 # < /u >

  < table >

  < /tr >

  < b >

  < td align = "left" colspan = "3" >

  #l_comments #.

  < table >

  < /tr >

  < b >

  < td align = "center" colspan = "3" >

  < table >

  < /tr >

  < / cfoutput >

  < /table >

  < / div >

  < / body >

  < / html >

  Solution to the problem was eventually remove all the dsp_create_pdf.cfm file Table labels.

  Thus only

  have been used in the code HTML of the CFM page and everything worked as expected.

• Model Page breaks

  Hello
  
  I have a XML template that contains about 10 pages of reports. I find that when I preview the content model reporter to the next page, causing the return with data report in the middle of the following pages.
  Some of the report templates contain loops that return multiple lines, but this affects the position of the data on the pages following.
  
  Is there a syntax similar to preserve the pages or page breaks?
  
  Thank you

  Yes at the end of each report within a form field.

• Are what output page break options there?

  So I confirmed that Acrobat Pro XI will let me take a 1000 invoice PDF and spit every number of pages (and other options for page break), but what I don't know is how to work the output options.

  When Acrobat Pro XI made page breaks, it would be able to find the number of the invoice of each invoice and assign it as a new file name? Is there a place where I can read more about the options for naming output files?

  It is not a built-in feature to it, but it should be possible with a custom JavaScript. If yo need to do this sort of thing a lot it would probably continue the approach.

• Page break!

  I'm converting my book to HTML 5 and I can't do a simple force to the next page; everything works together. You realize that something this common should be very easy to find the menu item, probably in the right click menu. You need a good producer, one who knew what he was doing.

  DW is not an e-book as InDesign tool that generates pages appropriate for printing.   DW is first & a Web page creation tool. And the truth is that page breaks have almost no connection on the web sites.  The page height is determined solely by the amount of content it contains.

  To optimize web pages for printing, you have to set up a print style sheet.

  http://coding.smashingmagazine.com/2011/11/24/how-to-set-up-a-print-style-sheet/

  Nancy O.

• How to get a Page break before Inline TOC in EPUB?

  I export an epub book file.  The table of contents are created correctly online, but I can't yet find a way to get a page break right in front of her.

  In the export-> advanced EPUB Options, I chose Split Document-> export tags to paragraph Style to light.

  The header of the table of contents (saying "Table of contents") has the paragraph style "TOC direction.» In panel-> paragraph styles change all the tags to export, I checked the box for 'Split EPUB' next to the 'Table of contents for the topic' style.

  But after exporting, there is no page break before the header of the table of contents.

  How can I fix this?

  Thank you very much in advance for any info.

  Basically, I think that you are doing it correctly. I met the same problem. What I found is that the title of the table of contents PLACE (using the page layout > Table of contents function and place it on the page) will not work to make a page break. This is a special type of object, because it can be updated by the update command Table of contents.

  You need to do a work around: you need to create a "Table of contents" in a separate frame and apply the paragraph title style Table of contents.

  In the style of table of contents, include not happy for the TOC title. Check out the screenshots below of my OCD.

  

  

  By separating the "content" in its own frame, it works in EPUB:

  

• Page break in RH10

  Hello

  I'm trying to insert a page break at some of my subjects so they started a new page in the printed documents, but a page break doesn't seem to work. I wonder why and what is the workaround for this problem, if any?

  For example:

  In a topic, I have:

  Heading 1

  Heading 2

  I wanted to section 2 on the next page in the printed documentation. Is this possible at all?

  Thank you!

  It's a variation on a method I sent tanborj, and it later turned out, not entirely satisfactory. I have sent since this solution which offers a simple alternative to the method in RoboHelp which has a bug in it.

  Open your CSS in a text editor. Add this

  . Break {page-break-before: always ;}}

  (You can change the name of the first instance of "break" to what you want but not spaces).

  1. In a topic go to what you want to be on the next page.
  2. Place the cursor at the beginning of this line.
  3. In the drop-down list style, you will find 'break' or all that you called.
  4. What to choose.
  5. You will see the page above the line break icon.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Unique problem with selction on the table (Query Page)

  Unique problem with selction on the table (Query Page)
  
  I have a VO data Bulletin Board, with a transitional attribute for selction unique column.
  My requirement is that I need to identify the line that was selected in the table.
  
  I associated with fireAction singleSelection column, such that whenever the user selects the line
  I'm looking for that VO using some rowIterator.
  But when running the loop of the transient VO that is mapped to the singleSelection variable is the show as "n" / NUll
  for all the lines...
  
  So how do you identify the selected line in singleSelection to a table.
  
  -Sasi

  In the property inspector of the element for which you've put firePartialAction, you can find a property named "parameters". That mention primary key as your setting.

  You can get the arameter using pageContext.getparameter ();

  -Anand