Find repeated values

Similar Questions

• need to query to find repeating values, please help

  I need assistance with SQL or what you think are the best way to do it, maybe PL/SQL.
  
  Basically it like that, in the 10G database, there are two address field:
  
  ADDESS_DELVRY - mailing address for example would be stored here
  ADDESS_DELVRY2 - building to apartments, away or PBM number would be stored here
  
  but sometimes I see the apartment B-123 in these two areas, so I need to find the duplicates, if there is a way.
  
  Thus, for example:
  
  ADDESS_DELVRY - 123 Elm Street Apartment 2B
  ADDESS_DELVRY2 - apartment 2B
  
  It's a problem, because then the apartment is printed twice on the mail piece. I think there is a small percentage who have this problem and I'm trying to find the best way to their ID, maybe use REG_EXP?
  
  Not sure, please help, thanks!

  Kodiak_Seattle wrote:
  If there is no luck there is a % or _ how is the request?

  SELECT *.
  FROM table_x
  WHERE the address_delvry LIKE "| address_delvry2;

  ?

  Nothing found.

  ATTENTION: you need the Joker '% '.

  The above condition is identical to

  WHERE   address_delvry = address_delvry2
  

  Try it with the wildcard '% ':

  WHERE   address_delvry LIKE '%'  -- The % is very iomportant!
          || address_delvry2
  

  I think that the suggestion of Srini (INSTR) will be more effective, if a little more complicated to code.

• How to find the value closest in the table?

  Hi all

  I just want to find the value closest from the string table. That I joined herer as an image.

  Now, if I want to find the value of 350 of the string table and that's not in the table in the output array there should be more close 350 display value...

  Thank you for the support

  Vinal Gandhi

  Hi G Vinal,

  something like the joint comes to my mind.

  It may be useful

  Mike

• Repeated values in the measure (FPGA, cRio) signals

  Hello

  I'm seeing repeated in my measurements values and trying to determine the cause

  I read a single analog channel from a module NI 9201. In order to eliminate the noise, I averaged several samples by using the ms and RMS measures VI (shown in "FPGA Code.png")

  An example of repeated values appear in the "comparison of Signals.png' for both the original signal and mean

  The sampling frequency of the NI 9201 module for a single channel is 500 kech. / s, which I also checked by measuring the sampling frequency (the code for this is also reflected in "FPGA Code.png")

  On the target of cRIO RT I record these values in a loop timed 500us using 1 MHz of the cRio clock

  For the ms and RMS measures VI, I tried several options, for example:
  -500 US measurement time, sample rate 500 kech. / s
  -450 US measurement time, sample rate 450 kech. / s
  -400 US measurement time, sample rate 400 kech. / s
  -US 300 measurement time, sample rate 300 kech. / s

  Each of them give measurements with repeat values to varying degrees, for both original and average signals

  Any suggestions?

  
  

• Find a value in a table

  Hi, I'm trying to find the index of a value in a table, I know that it is a VI called 'research in a 1 d table' but there is my problem: Let's say I'm looking the value 25 and in my series of measurement, there like 24.998 and 25.001 but not 25, this VI will not find the value 25 although he went close enough , so basically I try to inplanta a tolerance system making it able to find with precision +-3 or 4 on the index, doing someone something for this?

  Thanks for your time

  I wrote this for a similar job, but it could be used for your application.  Just use the vi attached in a loop to check "in range" and returns the index of the loop of the first occurrence.

  Hope this helps

  Ken

• Look for the logic find the value of m and c of this equation y = mx + c.

  Hello

  I have 4 points for example = 3.38276, 0.375866 xi

  Yi = 3.37749, 0.281924

  using this tip, I want to find the value of m and c.

  You please suggest me some logic to solve this equation using labview programming.

  I tried with one solution, but in this case I do not have the correct answer. Here as an attachment, there is vi help I tried to solve my equation, but in this case the value that never got as a response it is dissatisfied with the equation, means if I replace the value of m and c eqation then it must be L.H.S = R.H.S, but I don't have the right solution.

  You please guide me.

  Thank you very much.

  Why do you think that the results are incorrect? I put your numbers in your code and the result on a XY Chart Wescott, I then bunk which with more than 20 values with a value ranging from 0.6 to 3.2 x and use factors calculated in your code to generate values of Y. The two overlap almost exactly...

  Mike...

  BTW: There is a linear adjustment integrated into LV VI

• How to find the value max and min for each column in a table 2d?

  How to find the value max and min for each column in a table 2d?

  For example, in the table max/min for the first three columns would be 45/23, 14/10, 80/67.

  Thank you

  Chuck,

  With color on your bars, you should have enough experience to understand this.

  You're a loop in the table already.  Now you just need a function like table Max and min. loop.  And you may need to transpose the table 2D.

• How to find missing values in the table?

  Hi all..

  Please help me.

  

  For example:

  I have a. table

  in this table, I have a folder with the number 1 up to 10 serial number.

  And then, in table B, I put number between 1 and 10.

  and I use the number 1, 2, 3, 6, 8, 10.

  I want to find missing values between 1 and 10. So, can I select with query for this case?

  It's the value of query output:

  4, 5, 7, 9

  Sorry for the bad language.

  Thank you all.

  Select

  r

  Of

  (

  Select Rownum r

  Of the double

  Connect by Rownum<= (select="" serialto="" from="">

  )

  where are > = ((select serialfrom from tablea))

  less

  Select the series from tableb

• Where can I find the value of ss_nm_jvm_startup_properties?

  Hello

  I am trying to reset the password for the user weblogic using the document Doc-ID 1949675.1

  I am stuck at step 4

  B. start AdminServer:

  Java $ < s_nm_jvm_startup_properties > - Dweblogic.system.StoreBootIdentity = true - Dweblogic.Name = AdminServer weblogic. Server

  Where:

  < s_nm_jvm_startup_properties > is the same as the variable value of context ss_nm_jvm_startup_properties

  Where can I find the value of s_nm_jvm_startup_properties.

  I searched the support site and google it without any result.

  I'm new in EBS and try to upgrade the EBS 12.2.0 to 12.2.4

  Thank you

  Salman

  Hello

  Application contextfile $INST_TOP/appl/admin find the setting "nm_jvm_startup_properties".

  grep nm_jvm_startup_properties context_file.xml

  Thank you

  A H E E R X

• How to find the value dated the same day in the last year

  I want to know how to find the value dated the same day in the last year.

  I use now, there is the function with the year and the result is

  Year	Rev	There are Rev
  2011	3000
  2012	4000	3000
  2013	2000	4000
  2014	5000	2000

  It works but it's not that I want. I'm trying to add the column date (Ex.20140101) in my report but it'snot work.

  I want to show:

  Date	Rev	There are Rev
  20110112	200
  20120112	100	200
  20130112	300	100
  20140112	500	300

  If use (< degree >, < time_dim >. < date >, 365), it works but does not correct 100%

  Please help me...

  Thank you very much

  Check this link cool - bi.com

• Find a value in ASO...

  Gurus,

  If I hit a combination in OSB, essbase research the value of data presents at this location using the Index to locate the block, then the dense combination of members to find the value of data (it's my understanding, pls correct me if I m missing something here)...

  How are the data value for a particular combination sought to ASO (if its pagination through please developed)

  Thank you

  ~ RN

  ASO is, as you already know, completely different.

  If no aggregate views are materialized and compression is not in use, each data point of zero is represented by a 'row' in the .dat file.  The line contains a bitmap identifier metadata to the intersection and the data value itself.

  The clever bit (no pun intended) is how top-level queries are processed - the bitmap that represents your market size e.g. is coded so that you can find all the lines representative "Is" (and the sum of their values of data) in a single step, does not need to look for "New York", "Connecticut" and so forth separately.

  Views overall, compression, dynamic hierarchies and attribute dimensions all complicated.  If you can, buy "Development of Essbase Applications" and read the chapter of Dan Pressman.  Also, check out the following presentation at WORLD (both a video of the presentation and the slides are available): Kscope13: ASO operation and how to design for Performance

• How to find a value in any column of the table - essentially a search

  Hi guys,.

  Thanks in advance for your help.

  I'll try to find a value in any column of the table? How can I do?

  An example of value would be "FEDERAL."

  Using Oracle 11 g and SQL Developer.

  Thank you

  It's a question that is asked in the past several times (but not recently from what I remember).

  Michaels has provided in the past, solutions which are quite clever, just using SQL...

  10g of solution

  Michaels > var val varchar2 (5)

  Michaels > exec: val: = "Sub".
  PL/SQL procedure successfully completed.

  Michaels > select distinct substr (: val, 1, 11) "keyword."
  substr (table_name, 1, 14) "table."
  substr (t.column_value.getstringval (), 1, 50) ' / value of the column.
  CLO.
  Table
  (xmlsequence
  (dbms_xmlgen.getxmltype ("select" | column_name))
  || 'from ' | table-name
  || ' where upper (')
  || column_name
  || ') as superior (' %' |: val)
  || '%'')'
  ) .extract (' LINES/rowset / * "")
  )
  ) t
  -where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'SERVICES')
  order of the "Table".

  11g upwards

  SQL > select table_name,.
  column_name,
  : search_string search_string.
  result
  from (select column_name,
  table_name,
  "ora: view("' ||) " table_name | "") / LINE /' | " column_name | "[ora:contains (text ()," %' |: search_string | ")]. (%») > 0]' str
  CLO
  where table_name in ('EMP', 'Department')),
  XMLTable (columns str result varchar2 (10) path '.')
  /

  TABLE_NAME COLUMN_NAME SEARCH_STRING RESULT
  ------------------------------ ------------------------------ -------------------------------- ----------
  DEPT                           DNAME                          es                               RESEARCH
  EMP                            ENAME                          es                               JAMES
  EMP                            JOB                            es                               SALESMAN
  EMP                            JOB                            es                               SALESMAN

  4 selected lines.

• To find a value that does not move to columns

  Version of database 11g (11.2.0.3.0)
  AIX OPERATING SYSTEM
  
  I'm writing some SQL/PLSQL, who selects a value in a table that is not always in the same column. I need to find which column is on a table, then use this place of the column to find its value coresponding on another table.
  
  Example:
  

  CREATE TABLE TIMES (RUN_ID  NUMBER(10),TIME1 NUMBER(10), TIME2 NUMBER(10), TIME3 NUMBER(10), TIME4 NUMBER(10),TIME5 NUMBER(10));
  CREATE TABLE VALS (RUN_ID  NUMBER(10),VAL1 NUMBER(10), VAL2 NUMBER(10), VAL3 NUMBER(10), VAL4 NUMBER(10),VAL5 NUMBER(10));
  
  INSERT INTO TIMES VALUES (1000, 1,2,3,4,5);                          
  INSERT INTO TIMES VALUES (1001, 2,3,4,5,6);                          
  INSERT INTO TIMES VALUES (1002, 3,4,5,6,7);                          
  
  INSERT INTO VALS VALUES (1000, 101,102,103,104,105);                          
  INSERT INTO VALS VALUES (1001, 106,107,108,109,110);                          
  INSERT INTO VALS VALUES (1002, 111,112,113,114,115);                          
  
  SQL> select * from times;
  
      RUN_ID      TIME1      TIME2      TIME3      TIME4      TIME5
  ---------- ---------- ---------- ---------- ---------- ----------
        1000          1          2          3          4          5
        1001          2          3          4          5          6
        1002          3          4          5          6          7
  
  SQL> 
  select * from vals; 
  
      RUN_ID       VAL1       VAL2       VAL3       VAL4       VAL5
  ---------- ---------- ---------- ---------- ---------- ----------
        1000        101        102        103        104        105
        1001        106        107        108        109        110
        1002        111        112        113        114        115

  So for a time-say 3, I want to be able to find first the rows and columns, it appears in on the TIME table and the upward gaze of the WALTZ in the same places of the column in the table VALS.
  
  Thus, for example the time 3 above, I want to be able to return:
  
  1000 103 RUN_ID
  1001 107 RUN_ID
  111 1002 RUN_ID
  
  I got a database that stores values like that so I can't change the way the data is unfortunately inspired. Is there one clever way to do other than look at each TIME column by Union them together, then creating some dynamic sql statements to get the values of the VALS table?
  
  This is a simplified example, but the table has 98 columns!
  
  Any help will be greatly appreciated.
  
  Published by: 991224 on March 1st, 2013 07:13

  Hello

  Welcome to the forum!

  Thanks for posting the CREATE TABLE and INSERT statements; It's very useful!

  If you cannot permanently normalize the data, then you can normalize it on the fly.
  Here's one way:

  WITH   unpivoted_times     AS
  (
       SELECT     run_id
       ,     col_num
       ,     t_val     -- If wanted
       FROM     times
       UNPIVOT ( t_val
              FOR  col_num IN ( time1  AS  1
                                      , time2  AS  2
                                      , time3  AS  3
                                      , time4  AS  4
                                      , time5  AS  5
                              )
            )
       WHERE     t_val     IN (3)     -- or whatever
  )
  SELECT   v.run_id
  ,      CASE  t.col_num
              WHEN  1  THEN  val1
              WHEN  2  THEN  val2
              WHEN  3  THEN  val3
              WHEN  4  THEN  val4
              WHEN  5  THEN  val5
        END   AS v_val
  FROM      unpivoted_times  t
  JOIN      vals            v  ON  v.run_id  = t.run_id
  ;
  

  If the same number of target may occur more than once on the same line at the time, then the above query generates multiple lines with the same run_id. For example, if we change your data a little examples:

  -- Don't use this row:
  -- INSERT INTO TIMES VALUES (1002, 3,4,5,6,7);
  -- Use this row instead:
  INSERT INTO TIMES VALUES (1002, 3,3,3,6,7);                          
  

  Leave all other sample data, as you have it posted, then the output is:

  `   RUN_ID      V_VAL
  ---------- ----------
        1000        103
        1001        107
        1002        111
        1002        112
        1002        113
  

  If you have 98 (not just 5) columns that need to be compared, then you will need to list all 98 of these columns at the time in the UNPIVOT clause and all 98 of vals in the expression BOX. Sorry; I don't see any way around that. You could write dynamic SQL statements to the parts of code for you.

• How to find this value in the oracle database to find out the table

  Hi expert,
  
  I know there is a value in the oracle database, please show me how to find this value in the oracle database to find out the table that contains this value.
  
  Thank you very much

  918440 wrote:
  Hi expert,

  I know there is a value in the oracle database, please show me how to find this value in the oracle database to find out the table that contains this value.

  Thank you very much

  Go to the online documentation and discover the data dictionary. You may be interested in reading about ALL_TAB_COLUMNS, but you will need to know what you want until you can query the view to find information

• To find the value of a dynamic element to session state,

  Hi all
  
  Is it possible to find the value of an item in the session state, but the name of the element is stored in a variable
  as
  
  APEX_UTIL. GET_SESSION_STATE (v_variable)
  
  where v_variable would be the name of the element?
  
  Thanks in advance,
  RD

  You describe the default feature?
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDEJEJE

  DECLARE
    v_variable  VARCHAR2(20) := 'P1_ITEM';
    v_value     VARCHAR2(255);
  BEGIN
    v_value := APEX_UTIL.GET_SESSION_STATE (p_item => v_variable);
  END;
  

  I missed something?