Find the version of my executable built with the application builder?

Similar Questions

• can not find the application builder

  Hello

  I've read many old posts about this but have been unable to find something allows.  I have Labview 8.6 and am trying to build an application for a project.  When I right click on 'generation specifications' in the project and click on 'New', my options are 'Distribution Source' or 'Web Service '.  I tried to put in the software CD and re - install the generator of the app and it seems to proceed normally with the re - install, but still no 'request' in the menu of specifications of generation.

  Any suggestions on where to go next?  I appreciate ANY help you could provide here.

  Thank you!!!

  What version of LabVIEW you have?  Basic, full, Pro or Dev Suite?

  http://www.NI.com/LabVIEW/buy/  You can see what is included with each version.

• Cannot open Photoshop app error - this cannot run on your PC"'to find a version for your PC, check with the software publisher.

  I had a update to my Photoshop CC this morning, after having updated, I now have the following Windows message: "this application cannot run on your PC" 'to find a version of your PC, check with the software publisher. No error code not nothing. Anyone else is and you know what?

  No doubt sounds like something went kablooey; I updated my copy of CC PS this morning without any problems on Windows 10. Try a complete uninstall/reinstall again?

• Folio Builder: I can't find the Panel builder folio in the free trial version.

  Hello world

  I just installed the free trial of Indesign, but I can't find the Panel builder folio... How can I find it? Is it not available in the free trial version?

  Thank you

  HM, it would have been better to move this discussion on the "old" Forum of DPS

  Digital Publishing Suite

  Nevertheless, the question seems:

  InDesign CC-2015 does not support the 'old' DPS system.

  And the new 2015 DPS is still ongoing, only available in public beta for InDesign users.

  If Alfonso likes to use the DPS 'old' system, he must return to InDesign CC - 2014.2 or earlier (CS6, CC).

  See: installation DPS 2014

  Or get the Board of Directors of the public beta version of DPS 2015 *:

  See: DPS and CC 2015 InDesign

  Uwe

  * 2015 DPS is the unofficial name. The official name is stillSDP, but in the future, which means a completely different product:

  'Adobe Digital Publishing Solution'and not: "Adobe Digital Publishing Suite.

• DVD player showing an error of not finding the application

  When you try to play a DVD, the YEAR error message as not finding the application. Please respond to the problem.

  Hi Nibrasnajeeb,

  ·         What is the default Media Application that you use on the computer?

  ·         What happens when you try to open the disks in Windows Media Player?

  Run the troubleshooting below links and check if it helps:

  1:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  2:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

• Hi I was doing a tutorial on spllcing images and am confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something

  Hi, Yona,.

  The application is available for Mac machine and not a windows machine.

  Concerning

  Rohit

• I downloaded creative cloud, but I can't find the applications tab to help me install Dreamweaver. What should I do?

  I downloaded creative cloud, but I can't find the applications tab to help me install Dreamweaver. What should I do?

  change your serviceconfig.xml, missing Creative Cloud desktop applications tab

• where can I find the Application Frame on / off in the menus?

  Where can I find the Application framework to TOGGLE through the menus in Adobe Photoshop CC?

  At the bottom of the menu window.

• the application builder exe file does not work

  Hi all

  I have a usb data acquisition module, it is USB 2408-2AO of MC. I order the module with a VI and it works very well. I used the Application Builder to create an exe of the VI. The exe works great too, but only on my own computer and not on other computers.

  I already made the other screws's exe files and never had any problems to run the exe on other machines. I also tried to do an installation of the VI program and not just a stand-alone application, but once again the final application does not work. The application runs without problem on the target computer, no errors are displayed, but it just does not control the USB module as it should. I think the problem is that the builder Application does not include al screws required in the installation program, particularly MC devices to control the USB device. I tried to manually choose the screws, but it seems that everything is included... I am sure that the problem is the USB device, as I did other exe files and they all work very well (but they do not control the USB device) on other machines. Someone has any idea how to solve the problem?

  
  

• Kernel32.dll in the application builder

  Application builder has been seemed to be changed in version 8.6

  Due to the specific API function (file rename), I have to use kernel32.dll (CIN) in my application.

  After that the creation and execution by pressing 'Go' button (on the Launcher program) as a first step, it works.

  Continuous pressing second "Go" button, labview was told the Subvi confined CIN is failed or lack of external function Kernel32.dll:MoveFile in Subvi.

  The pitcher to load the main program (and the Subvi) by reference.

  When I did not understand the Subvi explicitly in the application builder property, "Subvi is missed.

  In either case, include the Subvi in "still included" in the generator of the application, "the service is missed.

  The kernel32.dll file was copied in the folder of data support.

  (1) how to set the property of the generator application for kernel32.dll?

  (2) the copied kernel32.dll file is valid in the other version of windows?

  labmaster.

  Have you tried the Move function? Why do you think that I suggested it? It can be used to rename files and directories.

  

  Rename dir1 dir2.

• Increase log idle time in the Application Builder

  Hello
  
  We have recently updated our version of the Apex to 3.2 and one of the things we see is that if the application builder has been inactive for a period of time when you want to do something new you must reconnect.
  
  Does anyone know where I can see what is the idle value and can I increase it?
  
  See you soon,.
  Paul.

  Hello

  This should help you
  http://www.inside-Oracle-apex.com/is-your-Oracle-Apex-session-timing-out/

  BR, Jari

• ORA-28112: failed to perform the function of guidance - error in the Application Builder

  Hey all,.
  
  I added a political function to one of my paintings, and now I get this error when I try to update a report region that refers to this table.
  
  "The query cannot be parsed into the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. "ORA-28112: failed to perform the function of guidance."
  
  If I remove the policy then everything works fine. My application works well with the policy in place. I just get these errors in the application builder when refreshing a report or a LOV that references the secured table.
  
  The analysis schema is APPL_USER.
  
  Here's the political function:
  
  FUNCTION DOCUMENT_TABLE_POLICY (object_schema IN VARCHAR2 DEFAULT NULL
  object_name IN VARCHAR2 DEFAULT NULL)
  RETURN VARCHAR2 IS
  v_nt_seq NUMBER;
  BEGIN
  IF use = "APPL_USER" or INSTR(user, 'ITFC_') = 1 THEN
  RETURNS A NULL VALUE.
  END IF;
  
  IF V ('APP_USER') IS NOT NULL THEN
  IF V ('F_NT_SEQ') IS NOT NULL THEN
  v_nt_seq: = V ('F_NT_SEQ');
  ON THE OTHER
  SELECT NT_SEQ
  IN v_nt_seq
  OF APPL_USERS
  WHERE UPPER (NT_ID) = UPPER (V ('APP_USER'));
  END IF;
  
  RETURN ' (DOCUMENT_TYPE, MANAGED_BY_ELEMENT, PROGRAM_CODE, CONTRACT_NUMBER) IN (SELECT DISTINCT R.DOCUMENT_TYPE, USL. ELEMENT, USL. PROGRAM_CODE, USL. CONTRACT_NUMBER OF USL, R IPRACA_SECURITY_ROLES IPRACA_USERS_SECURITY_LINK WHERE R.SECURITY_ROLE_SEQ = USL. SECURITY_ROLE_SEQ AND USL. NT_SEQ = ' | To_char (v_nt_seq) | ')';
  END IF;
  
  -UNAUTHORIZED USERS CANNOT SEE ANY DATA
  RETURN '1 = 0';
  END;
  
  This is how to set up the policy:
  
  BEGIN
  
  DBMS_RLS. () ADD_POLICY
  object_schema = > 'APPL_USER '.
  , object_name = > 'APPL_DOCUMENT '.
  , policy_name = > 'APPL_DOCUMENT_POLICY '.
  , function_schema = > 'APPL_USER '.
  , policy_function = > ' APPL_SECURITY. DOCUMENT_TABLE_POLICY'
  );
  
  END;
  
  
  Any help would be greatly appreciated!
  
  Thank you
  
  Jonathan Hart
  APEX 3.1.1

  It is possible that this raises an exception:

  SELECT NT_SEQ
  IN v_nt_seq
  OF APPL_USERS
  WHERE UPPER (NT_ID) = UPPER (V ('APP_USER'));

  Is there a line in APPL_USERS where NT_ID = ?

  Scott

• Is it possible to change the theme of the Application Builder?

  Is it possible to change the theme of the Application Builder? There are themes for applications; What happened to the constructor itself? I looked but did not see a selection for that.
  
  I'm a Geek through and through, I guess, but I think that you might be retentive xxxx love all of these square boxes. And these old eyes squint to focus among the vast sea of shades of gray. Black on gray and gray on white gives me a pain in the eye!
  
  If this is not the case, is there a place where the suggestions like this are made. Thanks - Howard

  Hello

  Is it possible to change the theme of the Application Builder?

  The short answer is, no.

  You can offer this feature here
  https://Apex.Oracle.com/pls/Apex/f?p=55447:1

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• What is the logic in the Application Builder

  Hi guys,.
  What is the logic in the application builder when you create a report for example. When we create a static report, we're going through these four steps:
  < ul >
  Display attributes
  Source
  Report attributes
  Conditional display < /ul >
  From the stage of 'Source', we can click on 'Create a report' and create the report...
  
  is there a table for each step... or there is a collection for each step. For example, when we click the button create collections are inserted into tables, then get emptied. ?????
  
  In my case, I have three real estate entities: owners, property and marketing. It goes like this:
  Enter the details of the owner, then click on create to go to the next page to enter the details of the property, then click on create to go to the next page to go into the details of marketing.
  
  I hope that my question is simple...
  
  Best regards
  Fateh

  Fateh says:
  Hi guys,.
  What is the logic in the application builder when you create a report for example. When we create a static report, we're going through these four steps:
  

  
  Display attributes
  Source
  Report attributes
  Conditional display

  
  From the stage of 'Source', we can click on 'Create a report' and create the report...

  is there a table for each step... or there is a collection for each step. For example, when we click the button create collections are inserted into tables, then get emptied. ?????

  In my case, I have three real estate entities: owners, property and marketing. It goes like this:
  Enter the details of the owner, then click on create to go to the next page to enter the details of the property, then click on create to go to the next page to go into the details of marketing.

  Who would be called a "Wizard" in the APEX (also frequently used in the Application Builder as you say). There is an 'Assistant' option when creating a new page that allows you to create and link the basic multiple page structure. Themes have "Assistant progress List" (horizontal) list templates (vertical orientation) and "Assistant list progression, horizontal Train' that can serve as indicators of progress of scene. You must build the content of each page using standard components. Once completed the "Wizard" there is nothing to indicate that the pages are linked logically, strangely, it generates a list of course assistant for you.

  Use Collections to store the data of intermediate stages before final treatment, if all the data is captured in a session. If you want persistence between sessions (e.g., allowing users to enter information over several days) use drafting/staging of the separate tables instead in more collections of capture data before final validation and promotion for the main tables.

• Executable built with CVI 8.1 error-5093, the analysis library is not found

  Upgraded to 8.1 Labwindows/CVI of Labwindows/CVI 7.0 development machines. An earlier application was built using the ICB 7.0 and installed on a test computer. The same code built with CVI 8.1 is any error during execution of the function stdev, 5093 error code has been generated. (From analysis.h: LibraryNotFoundAnlysErr =-5093, / / the analysis library was not found.) Tried to build a facility with 8.1 and installation on the test computer and application errors still executing the stdev function. Back to the same application, but built with CVI 7.0, it works fine. Am I missing something with the build in 8.1 options? Or is it something in the workspace or project? Please notify. Thanks in advance

  Hi Tommy,.

  In CVI 8.0, the implementation of the analysis library has changed a static library that is linked to your .exe in a DLL that must be loaded when running. If you rebuild your source code and you want to deploy to another machine where the CVI environment is not installed, then you must re-create an installer in CVI 8.1 distribution, so that he can pack the analysis as well as your program library.

  You can confirm whether the analysis library is installed by searching for C:\Program NIUninstaller Instruments\Shared\Analysis\nianlys.dll in your target machine (although it is not enough to simply copy this file manually).

  When you create an installer in the CVI, be sure that, in the tab drivers & components in the dialog box change Installer , support of analysis element under the Group of LabWindows/CVI Run-Time Engine is checked.

  Luis