findstr/c: "[SR]" %windir%\L\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' does not work

Similar Questions

• I tried to install something on the account of other users but my admin password does not work, I logged my account admin to make sure that im using the correct password and it works? any suggestions

  Works of password to log into the admin account

  password does not work to install the software on other accounts

  This will happen when different keyboards are installed. Try to use a password like 123456 is insensitive to the different schemes. CapsLock or NumLock is also a frequent culprit in such cases.

• my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  my epson dx4050 will not work or open I use wind 7 now, but it does not work pls help

  Because your message was clearly not your comments on the web site of MIcrosft responses, I have he left the comment forum in the forum 'Hardware and drivers' Windows 7.

  When you say it "will not open', do you mean physically or you want to tell the printer object in the printers and devices folder does not open when you double-click it?

  Have you tried to delete the printer and add it again?

  He has already worked?  If so, have you changed between yesterday and today?  The device is supposed to be compatible with Windows 7 and should not need a separate driver, but if you have Windows 7 32 - bit, you can try using the driver on the Epson website.
  http://eSupport.Epson-Europe.com/FileDetails.aspx?LNG=en-GB&data=lkuCfcvA9cw77whFcRdwis4JOQH9mtNd&ID=324678

  How do you connect to the Stylus DX4050?  It is USB, wired network or wireless network?  The documentation says it is USB, but I connected USB printers to the network, then maybe you have as well.

  The more details you provide on your printer and your system, the better people can help you.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• I bought the app composition unique creative cloud for acrobat.  When I log into my account it does not show that I bought.  How can I get the download to work without buying again.  I have a receipt for my purchase.

  I bought the app composition unique creative cloud for acrobat.  When I log into my account it does not show that I bought.  How can I download this product without buying it again.  I received my purchase.

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• As prelude does not work with red images, how can I add logging information to a file in Premiere Pro

  As prelude does not work with red images, how can I add logging information to a file in Premiere Pro CS6?

  RED footage has a restriction on the metadata.  We are looking into what it would take to get the metadata full support in our system, but you cannot mark red footage at this time.

• Windows 7 task scheduler - run if user logged in or not (DOES NOT WORK)

  I have an exe thread created in visual studio 2013 requiring a run setting. I want to run at 14:00 on every day when user connected power by the windows Task Scheduler. I followed the steps to plan an exe to run through the Task Scheduler windows below.

  Step 1: Created new task with the name "Billing Update", and I put it with option shown below run if user logged in or not.

  

  Step 2: Configure option trigger run exe on all day at 14:00.

  

  Step 3: Configure Action tab to select Billing.exe with arguments 2015.

  

  Step 4: I clicked the ok button, he asked me the username, password to run the exe if you know if the user is logged in or not. I did put with appropriate credentials and hit ok.

  

  When I connected to execution of the program, he has not worked.

  I checked with the conditions below to run the program.

  1. I ran the program with the Option start-> run only when the user logged on. (Output result program worked)

  2. I ran the Notepad.exe program with Option-> Run or not connected user parameter. (Output-no result has no program)

  2. I checked for required securities to assign users, and General groups-> change user or groups for this I gave full access to the D:\Billing.exe program using security (output-no result has no program).

  

  I googled out for the possible solution, but does not have a suitable, why Scheduler tasks done done do not run the program when I put the setting "Run if user logged in or not." Please advise me for the same thing with the detailed solution.

  When you select "Run if user logged in or not ', then the task runs as a background process. He won't let users interact with it. You can tell by scheduling notepad.exe. After that task scheduler called notepad.exe you can see using tasklist.exe or by looking at the Task Manager.

• calculation does not work / logged on as user

  I'm teaching students to use Authorware in making them do the tutorial provided. When creating the button exit and by double clicking on the calculate button, the window that opens is grayed out - nowhere to click on an icon or type text. When I'm logged in as an administrator, it will work. I tried to change the security for the Macromedia folder so that the user has full permissions, but that has not worked. Any suggestions?

  Nevermind - it was a matter of Fortres!

• I just did a software update in El Capitan 12.11.3, computer (a macbook air) does not allow me to log in my account, it does not recognize my password. However, I can connect as a guest without any problem.

  I just did a software update in El Capitan 12.11.3 on my macbook air and now can not connect to my computer. My profile is here, but it will not recognize my password. I can log in as a guest, it's how I use it now.

  Try resetting your password: change or reset a user account password on your Mac.

• for three days, I am unable to log on my user account who is the administrator. I tried my usual password and does not work. However, the other two users accounts are still functional.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/default.aspx/KB/940765/en-us

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Try the information above for this problem, as you know the password.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1303 when you try to install Adobe Reader on Windows 7. The error message says to log on as an administrator. Yes, I did. It does not work.

  I am trying to install Adobe Reader with Windows 7.  The installation fails with an error 1303 tent access to c:\Program files (x 86) \common files\adobe\1.0.   I tried to log in as an administrator. No luck.

  To see if it a Windows problem or an Adobe issue, see if this PDF Reader installed.
   
  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/
   
  If so, I would stick with it. Foxit is much more user friendly Windows.

• mouse/Touchpad does not work after logging in

  I have a Toshiba Satellite with Windows 8, he bought this way, I've had it for about a month, were execution of updates when suggested, there are 2 accounts admin and has a guest. I am currently on the second admin account and the question that is at hand is not the case here, it only happens on the main user/administrator account. When the computer is on the login screen the mouse pointer is visible and the touchpad works, but once I log on the account (even once, it happens only on one account) the Tablet seems to no longer work, and there is no the mouse pointer on the screen. I tried troubleshooting as suggested in answers to similar questions, but he doesn't seem to find the problem. The question was raised today, just before I decided to do an update, once the problem I tried the update, returned a few hours later and the problem is still there. What do I do? Haha, I can not afford to buy a plug-in mouse, or what ever and don't have one currently.

  Hi Jessica,.

  What is the model of your laptop?

  You can find the drivers on the link below.

  http://support.Toshiba.com/

  If you don't get the drivers for Windows 8, then you can try to install drivers available for the earlier version of Windows in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

• JDeveloper 12 c Oracle Diagnostic Log Analyzer does not work

  Hi, I use JDeveloper 12.1.3 to develop my application and I activated the diagnosis Oracle log set up for my local integrated Web server.

  Basically, I want to test the performance of my application, such as the loading time of the page / LOV loading time / etc...

  Some option was enabled for registration, which includes oracle.adf, oracle.adfinternal, oracle.jbo.

  However, when I ask "by ADF Request', nothing have been made from there.

  

  So I try to interview "by the Log Message" and there are a lot of return. When I sort the return by getting the 'ADF ask only', I saw on ADF application with an error sign beside it, there is an entry and a reason for the error to come up with it

  "Previously reported an error [IndexOutOfBoundsException in o.adf.logging.dt.analyzer.model.LogMessageNode:108].

  No idea how to solve this problem?  Thank you very much!

  

  Yes, I'm on 12.1.3 also.

  You must enable Diagnostics logging as in the image below

  

  Then it should work.

  Timo

• Logging SQL 2012 does not work

  I installed Log Insight Manager 2.5 GA (Version 2.5.0 - 2347850) and install the agent on a Server Standard SQL 2012 and also installed the SQL management pack but nothing appears in the Insight journal.

  Here's my entry in liagent.ini for SQL file I got out of an on-line tutorial.

  [filelog |] SQL2012]

  Directory is Microsoft SQL Server\MYSQL11. MSSQLSERVER\MSSQL\Log\

  include = ErrorLog.log

  exclude = * .trc

  Charset = UTF-16

  {event_marker = ^ \d{4}-\d {2} - \d {2} \d{2}:\d{2}:\d{2}\.\d{2}

  And here are some entries from the journal of the animal.

  2015-02-17 09:07:55.202336 0 x 00000968 < warng > FLogCollector:692 | There are currently no log file that goes through the filter of file name "enter" / "exclude" for channel < SQL2012 >.

  2015-02-17 09:07:55.202336 0 x 00000968 < path > FLogCollector:246 | Subscriber to channel < SQL2012 >.

  Is this a configuration problem? I've set up on another SQL server server and see if that does the same thing.

  If it's a permissions issue then you could increase the debug_level 1 by adding

  [record]

  debug_level = 1

  and then look at the log of the agent. You can also try to change the include

  include = ERRORLOG *.

  or remove the option include all together and that the agent collect all files in this directory.

• DW Log In User server behavior does not

  I created a table of users in MySQL using phpMyAdmin with four fields, name, username, password and level. I filled the table with four entries, with phpMyAdmin. Then in Dreamweaver, I created a php page with a form with two fields, "username" and "password" and a "submit" button. Then I added the server behavior of Log In User fields selections with obvious and it doesn't work - nothing happens with Login is clicked. I have read the essential Guide to Dreamweaver CS3 with CSS, Ajax, and PHP and Dreamweaver CS3 The Missing Manual and look at this forum. Everything I read, I do all the right things. Below, I've added the code page. I understand a lot of it, but not the use of "accesscheck" in $loginFormAction. I do not see how the Send button is recognized.
  
  Any help would be appreciated.
  Marty
  
  
  <? php require_once('.. / Connections/archives.php');? >
  <? PHP
  If (! function_exists ("GetSQLValueString")) {}
  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
  {
  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;
  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);
  Switch ($theType) {}
  case 'text ':
  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
  break;
  case "long":
  case "int":
  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';
  break;
  case "double":
  $theValue = ($theValue! = "")? « " ». doubleVal ($TheValue). "" "": "NULL";
  break;
  case "date":
  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";
  break;
  case "set":
  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;
  break;
  }
  Return $theValue;
  }
  }
  ? >
  <? PHP
  Validate request to connect to this site.
  If (! isset {})
  session_start();
  }
  
  $loginFormAction = $_SERVER ['PHP_SELF'];
  If (isset($_GET['accesscheck'])) {}
  $_SESSION ['PrevUrl'] = $_GET ['accesscheck"];
  }
  
  If (isset($_POST['username'])) {}
  $loginUsername = $_POST ['username'];
  $password = $_POST ["password"];
  $MM_fldUserAuthorization = "";
  $MM_redirectLoginSuccess = "editmenu.html";
  $MM_redirectLoginFailed = "Editing.php";
  $MM_redirecttoReferrer = false;
  @mysql_select_db ($database_archives, $archives);
  
  $LoginRS__query = sprintf ("SELECT ipos2, ipos3 WHERE ipos2 = %s AND ipos3 ticks is %s",
  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));
  
  $LoginRS = mysql_query ($LoginRS__query, $archives) or die (mysql_error ());
  $loginFoundUser = mysql_num_rows ($LoginRS);
  If {($loginFoundUser)
  $loginStrGroup = "";
  
  Declare two session variables and assign them
  $_SESSION ['MM_Username"] = $loginUsername;
  $_SESSION ["MM_UserGroup"] = $loginStrGroup;
  
  If (isset($_SESSION['PrevUrl']) & & false) {}
  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];
  }
  Header ("Location:".) $MM_redirectLoginSuccess);
  }
  else {}
  Header ("Location:".) $MM_redirectLoginFailed);
  }
  }
  ? >
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >
  < / head >
  < body >
  < do action = "<?" PHP echo $loginFormAction;? ">" method = "POST" name = "form1" >
  User name:
  < input name = "username" type = "text" size = "30" / > < br / >
  Password: < input name = "password" type = "text" size = "20" / > < br / >
  < input name = "submit" type = "button" value = "Login" / >
  < / make >
  < / body >
  < / html >
  

  Thank you once more. I have add the echo of statements and they don't display anything. Then I looked on my entry submit the statement and found that while the name was present, the type was button, therefore he wan made anything. I changed the type of submit and id = button, and it worked fine.

  I appreciate your stay with that.

  Michel Marty