Satellite A200-1BJ: webcam currently in use or not plugged in!

Hello

I have laptop Toshiba A200-1BJ and I had a problem with my camera.

When I try he woke up, he gives me this massage currently in use or not plugged in.
I delete the old driver provided with the laptop and download another driver from the Toshiba site for my laptop model and install it, but my camera didn't work.
It gives a massage that I turned on my camera.

Can you help me in this way?
Thank you for the cooperation.

Stand by. You try to use the cam with another application or just to use it with the software offered by Toshiba?

Try it please remove Toshiba Software and test it with Skype or MSN.

Tags: Toshiba

Similar Questions

  • Webcam is currently in use or not plugged in using MSN on Satellite Pro

    Hello

    I built in webcam on Toshiba Satellite Pro, but trying to use through MSN it just says this:

    Your conversation cannot begin because your camera is currently in use or not plugged in.
    Make sure your camera is available and try again.
    a built in webcam on the satellitle pro but trying to use through MSN I just got this message

    I'm not good with laptops, someone help me?

    Sam

    Download driver Chicony Webcam set far from the section drivers from the Toshiba site
    Install Vista Service Pack 1 or the 934374 patch: http://support.microsoft.com/kb/934374
    Update of MSN and your other software based on the webcam

    If you have Skype or another program that can use the webcam, make sure they are completely closed and not, sitting in the system tray.

  • A few questions on the Satellite A200-1BJ

    Dear Sir.

    A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
    The system configuration is provided by the company.
    Operating system: Windows Vista editions Home Premium
    300 hard drive space is divided into two partitions:
    C - Vista with Go 138
    D data disk seen 139 GK

    When buying the laptop, I had only the recovery CD and there is no Drivers CD. Three years agao, at the time of buying laptop toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.
    I need to install a software application which requires about 200 GB of space. In this regard, I have the following questions for which I want explanation from you to guide me to take the appropriate action.

    (a) I want to create a new 50 GB partition using the free space on the C drive. How can I do this? If possible, so I can install my application software by merging 50 GB with the D drive space.

    (b) can I change the configuration of HARD disk space by installing the new copy of windows vista operating system. During the installation of the operating system, it will ask for the disk partition in this case, I'll format the C drive current and have a new partition of C (78 GB) and D (190 GB). Is this possible.

    (c) If b is possible, so how do I install all drivers in the system currently installed with, since Toshiba Co. don't did not provide me with the driver CD. How

    Can I get the drivers CD. Do I have to load all the drivers of webside and create a DVD of the same thing?
    Waiting for your response, which will allow me to take the appropriate decision.
    Thanks in advance.
    Kind regards.
    N. Rama Krishna Pai

    > Three years ago, at the time of buying laptop Toshiba, I got the drivers CD as well with the recovery CD. Why the driver CD does not come in the current edition of the laptop.

    I put t know exactly why Toshiba has decided to only provide the recovery CD and not the driver CD with the laptop, but all the drivers that are preinstalled on the laptop are on the Toshiba driver page. Given that all computer users have access to the internet, it should t be a problem with the driver download!
    Also the restore CD contains the entire image of Toshiba with all the pre-installed driver, tools and utilities.

    > I want to create a new 50 GB partition using the free space on the C drive. How can I do this?
    You can do it in Vista disk management.
    You can reduce the C partition and on free space, you can activate a partition of second or third.

    > Can I change the configuration of HARD disk space by installing the new copy of the windows vista operating system?
    To my knowledge, this is not possible using the Toshiba Vista recovery CD.
    But check the proposal above!

    > If b is possible, so how do I install all drivers in the system currently installed with, as Toshiba not did not provide me with the driver CD.
    B is not possible, but as already mentioned, the drivers are on the Toshiba page

    > Can I get the drivers CD. Do I have to load all the drivers from the website and create a DVD of the same thing?
    This CD can be obtained, because it does not exist. Download driver page.

  • Satellite A200-1BJ: need SATA driver to change the Win XP operating system

    Hello

    I have the Satellite A200-1bj with Vista.
    I want to change to XP pro but the famous message
    "There is no hard disk" are indicated.

    So, I need driver for phones!
    helllllllllllp

    Hello

    The Satellite A200 - 1BJ PSAE6E needs an Intel Matrix Storage Management utility.
    This iMSM must be installed in the first place.

    It seems that this topic has been discussed a lot of time here in the forum.
    I found very interesting thread;
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749&MessageID=94438

    Check these two threads and if necessary you can use the advanced search options in this forum and looking for Intel Matrix Storage Manager

    Concerning

  • Satellite A200-1BJ tends to overheat and cutting everything in game

    Hello

    I have a problem with my laptop. He has a tendency to overheat and shut down when I play games. CPU was just before 107C the emergency stop.

    Fan works, but fan speed gets ever faster from 70 ° C to stop. (I know it can go faster, because when I flashed the Bios, he spends at maximum speed.)

    So my question is: is there a way I can force fan to move at full speed?

    Satellite A200-1BJ, Mobility radeon HD2600, Vista ultimate 64 bit graphics card, 4 GB of ram, bios 2.20

    Post edited by: Jason (added bios information)

    Hi Jason

    > I have problem with my laptop. He has a tendency to overheat and shut down when I play games. CPU was just before 107C the emergency stop.
    I agree with you. It really looks like an overheating problem.
    If the internal temperature reaches a critical level then the laptop stops automatically to prevent the equipment from damage.

    Why a laptop overheat?
    Well, there are various reasons such warm-ups.
    First of all it is possible that don t cooling modules work correctly because of the dust and debris inside the laptop.

    You must also make sure that there is enough free space around the laptop to ensure fresh air circulation.

    At the other hand as a graphic driver non-Toshiba could cause an overheating problem.
    This is why you should always use a graphics driver for the Toshiba driver page.

    Please check the points mentioned and maybe you might know the reason for the overheating problem.

    See you soon

  • On the Satellite A200-1BJ wireless LAN

    Hello

    I need your kind help in this issue, think I'm dealing with my laptop. The driver disappeared and I can't. I tried to download from toshiba support, but it did not work also.

    OS: Vista home
    Model: Satellite A200-1BJ

    Also, whenever I try to use my modem it does not work and I get the message 'no dial tone' although the phone line works.

    pls advise me on these issues

    THX
    Khalid

    Hello

    what driver you downloaded? For Intel or Atheros? It would be really interesting because if you have installed the wrong driver, it s possible that it doesn´t work. So if you try the two pilots, one of them SHOULD work.

    With regard to your Modem:

    Go to control panel and then open the phone and Modem Options, and then choose the "Modems" tab, choose the modem you´re to help. Then, a window should appear where you must choose the tab "Modem". There is a "Control dial" setting where you must uncheck the box "in waiting for the dial tone before dialing."

    After that, the modem should work.

    Welcome them

  • Satellite A200-1BJ - no display on external monitor

    Hello

    I have a display problem with my laptop, which is:

    When I connect my computer to an external display (projector - data show - using the rgb or s-video cable), the contents of my computer are not displayed.
    I used F5, Catalyst Control Center, but without success.
    When I connect it with a TV using s-video, I get the message "no signal".
    I think of the existence of the other devices, but the content is not sent to the external display.

    I don't know what the problem is. I need to use my computer and the screen using a projector for my presentations, which is very common.
    The problem is that he used to work, then suddenly it stopped display on external displays.
    I could not understand the problem, then I thought that the settings have been changed accidentally.
    So I formatted my computer back to the factory setting, but my attempt failed and it still does not display on the external monitor.

    My computer specs:
    -Toshiba Satellite A200-1BJ
    -Processor: Intel Core2 Duo
    -OS: Windows Vista editions Home Premium
    -Graphics card: ATI Mobility Radeon HD 2600

    Does anyone know the solution?

    Thanks in advance.

    In your case I would update the BIOS and the display driver. The two you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Have you tried different cables? Maybe it s faulty or too long.

    Also, be sure to use a rate of resolution and refresh supported for the external monitor display. You can change that in Catalyst Control Center.

  • Satellite A200-1BJ does not start

    Hello

    My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

    I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

    In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

    No problem with the motherboard or power?

    Thanks for help.

    Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

    Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

    Have you installed any updates or anything that may be responsible for this?

  • Satellite A200-1BJ: Windows Server 2003 need display driver

    Dear Sir.

    A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
    The system configuration is provided by the company.
    Operating system: Windows Vista editions Home Premium
    300 hard drive space is divided into two partitions:
    C - Vista with Go 138
    D data disk seen 139 GK

    I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

    My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

    Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

    Thanks in advance.
    Kind regards.
    N. Rama Krishna Pai

    Hello

    Are you looking for the drivers for Windows Server 2003?
    Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

    Win Server 2003 operating system was designed based on windows XP.
    So usually the drivers Win XP should work!

    Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

    Maybe a site www.omegadrivers.net might help you.

    But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
    Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

  • Need drivers for Satellite A200-1BJ

    Nice day

    I have computer laptop satellite a200-1bj

    I want to download its drivers but without success... He is not here in the page drivers

    Help out me

    Of course, it is here.
    Your laptop is PSAE6E part number.
    Go to Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp and choose the archive option.

    Follow these steps:
    Product type > Archive
    Family > Satellite
    Product series > satellite A series
    Model > Satellite A200 (PSAE6)
    Model short-term > PSAE6E
    and so on.

  • Satellite A200 - Chicony Webcam - resuscitation

    I have a Satellite A200 age of four years with a Chicony Webcam who died a year ago.

    I had a few unsuccessful attempts at resuscitation, including running the tool of diagnosis of Toshiba (doesn't seem to cover the web - cam) and the process of "repair" available through the 'Control Panel', ' Uninstall/Change/repair.
    Whenever I try the cam, I get a message error "Please turn the camera.

    I hope someone out there can tell me how this seemingly simple task!

    Thank you

    I put t understand you.
    You wrote this webcam is dead.

    What do you mean exactly?
    Is defective or you cannot use due to missing driver?

    What is webcam listed in the device as unknown device manager?

  • Satellite A200-PSAE6E: I want to use Windows 7 - what drivers should I use?

    I have a Toshiba Satellite A200 PSAE6E, and now I want to use Windows 7.
    Only, I have a question, if the drivers are supported and what BIOS I need to use

    Hello

    Windows 7 is not official on the market. Only the RC (Beta) version is available.
    This means that there is no driver specific to the Win 7 OS.

    But as you know the Vista is very similar to Win 7 and it is why some drivers (not all) should work and work with Win 7.

    Just test and check what can be used and what doesn t work with Win 7

    Maybe you could post some summary finall...

  • Satellite A200 - Chicony Webcam with Yahoo messenger

    I have a Toshiba A200-PSAE0E with Windows Vista Home Premium. My built-in Webcam (Chicony USB 2.0, 1.3MP camera) worked very well with all applications including Yahoo Messenger.

    The driver is installed fine and support both camera software.

    I installed Office 2003, and it is the only change that I made on the software.

    My Webcam now works with Camera Assistant software, but not in Yahoo Messenger.

    While I checked in the Yahoo help for the needs of webcam it clearly says the color scheme / Compression should have the format RGB, I420, or IYUV, which I did not, instead I YUY2.

    How come my Webcam with Yahoo messenger access.

    concerning

    Perch

    > I have a Toshiba A200-PSAE0E with Windows Vista Home Premium. My built-in Webcam (Chicony USB 2.0, 1.3MP camera) worked very well with all applications including Yahoo Messenger.

    I think you don't need all the new drivers, because you already said the webcam worked fine using the original installed drivers.
    I don't know exactly why it is not possible to use it with Yahoo messenger after installation of Microsoft Office 2003, but I think that there are some confused system or drivers files.
    But to be honest, this seems very strange and I can't believe that the Office 2003 could have a bad influence on the webcam?  :|

    Eventually, you will need to reinstall the operating system or should try to restore the operating system to the previous system to check if it helps to solve this problem.
    That's all I can suggest.

  • Satellite P750 PSAY3A - webcam no active using Skype

    You just bought the toshiba Satellite P750 model No.: PSAY3A - 02L 001.
    The webcam works, but it does not turn on when I connect into SKYPE video calls.

    Any help/advice would be appreciated.

    Hello

    Did you choose this internal webcam as default device in the Skype settings?
    You should do this!

    In addition, you should also check if the authorization Skype settings allow using the webcam to anyone in your Skype list.

  • Satellite A200 - 21dts: cannot access internet using Fabrizio

    Hello!

    I have the Satellite A200-21dts running on dual-booting.
    With Vista, all work fine.

    Since last Friday, on XP, I can't CCADE on the web.
    I have install the Driver Checer (?) and after that I have no 'net '...

    Buy the way: my web work wireless!

    Hello

    > install the Driver Checer (?) and after that I have no 'net '...
    Sorry mate but the case seems to be clear
    In my opinion, this tool has touched the WLan

    Why you n t remove this tool and why you don't reinstall WLan driver again?
    I think this should help

    Welcome them

Maybe you are looking for