Fine positioning/polishing tuning a website

Similar Questions

• Unable to start with a new graphics card

  Recently, I upgraded my old 550ti GTX with a new Radeon HD 7850 from powercolor.  After I installed the new card, there is no display, and there is no position, so I don't think it's even starting up.

  The old GTX has worked very well, so the pci slot is ok.  The GTX 550ti uses a 6-pin connector for the power supply, so I think that the power supply is too thin.   I uninstalled all the drivers from nvidia and tried to install the new card.  No boot.  The integrated vga works, so the cable is fine.

  Powercolor's website States, "mainboard not able to detect bios graphics properly during boot UEFI" and recommends an update of the bios. Referenced from this link (http://www.powercolor.com/us/support_faq.asp)

  Here are my specs.

  Name of product p7-1240

  Series [redacted]

  #ABA product number H2L70AA

  OS Windows 7 Home Premium 64-bit Service Pack 1

  Processor AMD A10 - 5700 APU with graphics Radeon (TM) HD

  10 GB system memory

  1600 MHz 1 4GB Hynix Semiconduc DIMM memory slot

  Location 2 2 GB DIMM Hynix Semiconduc 1600 MHz

  Slot 3 4GB Hynix Semiconduc DIMM memory 1600 MHz

  2AE0 system 1.0 Board

  BIOS system 7.07

  Rosewill 650W PSU

  Any advice would be appreciated.  Thanks in advance

  UPDATE! I am very (very) pleased to report that this problem has been resolved.  After building my courage (and saying a quick prayer), I decided to use the update of the Bios that is only for windows 8 on my Board.  And success!

  After updating the Bios, which is only like 2 minutes to complete, my PC runs the card powercolor!  In the end, a bios update was indeed necessary, and I accomplished successfully.

  Caveat! If you have the same problem, I still recommend that a bios update is a last resort.  I could have just gotten lucky, do what I did to your own attention.

  Now, in closing, I have a few questions.   Why this update was so hard to find?  Personally, I used an update of the bios on my desktop PC p7-1240 with the Jasmine MSI Ms 7778.  If it worked, why is he not on the page to update my PC?  Why the documentation says clearly that the operating system must be windows 8, when in fact it is false.   I am running windows 7, and the update worked.

  My new update of the bios supports processors AMD of Richland?  Before I bought the graphics card, I bought a new Athlon II X 4 760 K Black Edition, but had to return it. Even if the chipset supports all sockets of FM2, the bios is not.

  I can't believe that I am the first and perhaps the only person to try this solution.

  Thanks for all the tips.  This problem is solved.

• How to add the offset to the items of id for the page scrolling

  Hello world

  I use jQuery scrolling page which requires jQuery easing, and I applied scrolling page class ID to several elements of the image throughout the site. He is also working on the elements of the section of the site.

  The issue I'm having is when any category id are selected in the navigation bar, for example in 'services', click on "Why choose us" in the drop-down menu, you will see it scrolls to this element, but it is placing too high up on the screen and part of this element is covered by the upper navigation bar.

  What I want to do, it's somehow add an offset from the elements id so that he finds a little lower on the screen just below the navigation bar, as it does for the elements of the section of the site. For example, 'our team', which is placed in a section works fine.

  Please see website link and jQuery code for below.

  http://www.clockdoctors.co.UK/test/

  jQuery for the functionality of scrolling page - requires the plugin of jQuery acceleration

  {$(function()}

  $('a.page-scroll').bind ("click", {function (event)}

  var $anchor = $(this);

  $('html,_body').stop (.animate({))

  scrollTop: $($anchor.attr ('href')) .top () may

  (}, 1500, "easeInOutExpo");

  Event.preventDefault ();

  });

  });

  I see. in this case, you may need to add an offset spesific for different updates page with anchors and based on the location of where change of resolution:

  you would use ID at all that will change your layout and you don't want that. in this case change all your refferals in a label - anchors

  and then in the CSS position them based on the resolution in a relative path:

  CSS:

  {#myName}

  position: relative;
  Top:-100px;

  }

  In short: all the ID change them as anchors instead of ID, then according to the resolution change the value at the top so it fits perfectly in all the page layouts.

  PS. my suggestion if possible rather collapse the header make more minimalist height when the user scrolls down, so it's less work and it takes less space in the content.

• Will not print in color from my Mac or iPhoto for HP photosmart D110

  My printer will print only in black and white when I print from my Mac OS X 10.6.4 on my printer.  I uploaded the photos I photo and print only in black and white.  When I put the card directly into the printer, it prints fine color.

  HP website was no help at all with this issue.  All of the suggestions.

  Print a self-test of the front of the printer. It prints color? If this is not the case, there is something wrong with your color cartridge. What version of Mac OS X?

• Images of the particular load-only error of the site, other computers can see perfectly well site.

  I am trying to display fabric.com. Initially, I looked the site very well, then I have connected to a WiFi with bad service and none of the pictures showed on this site and others. Now whenever I discovered the site, photos do not come to the top. I've tried clearing cookies and restart. All other sites work fine and the fabric.com website works on other computers.

  Could be your image for the site permissions. If you right-click on the page, choose display information Page and click the permissions tab: 'Load the Images' takes care to block? In this case, you can simply check the box 'Use default' and which must fix. (Of course, you will need to reload the page.)

  More troubleshooting tips in this article, if it does not help: Images or animations do not show | Troubleshooting | Firefox Help.

• Windows 7 OEM license, cloned the new hard drive.

  I'm scratching my head on this one.

  I'm running Windows 7 Pro with an OEM license.

  Beyond December, my original hard drive started failing so I made a clone of Clonezilla and transferred to a new hard drive.  Since then, I have not been able to run Windows update and I regularly get a Windows is not real popup.  I checked the section properties and my computer Windows Activation of Windows is enabled.  I tried the site of verification but that sends me to a web page that does not seem to load correctly and 9/10 times.  When I managed to load and I downloaded the WindowsActivationUpdate tool, it gives me just a Setup 0xC8000247 error.  I tried returning my SLUI 3 product key and everything went through fine.  I checked various websites and people say that it must be good using a new hard drive, others say you can't and others are calling saying Microsoft and speak to someone.

  Can I use my OEM license when transferring to a new hard drive?  Answer, what would be the next step?

  Yes, you can use the same OEM license, because it's the same computer.

  What you need to do is probably performing a new installation. Clone software tends not to provide the best results.

  The old hard drive still works? You might try one last time to create a system image and restore it on the new hard drive:

  How to pass Windows 7 to a bigger hard drive - books...

  This of course would mean reinstall the old hard drive, create a system image and then restore it on the hard drive.

  Another option is to perform a new installation using the OEM key.

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• BlackBerry applications Z10 phone media card hd transfer

  Hey all! I looked and searched through many positions, the threads and websites trying to find an answer to this. Maybe I missed it. Is anyway that I can transfer files downloaded app (applications of games, etc.) from the hd to the press card phone? If this isn't the case, could someone explain that to me?

  I would like to keep my phone hd liquid and save all things, that I keep my card. This is a 64 GB card. So there is a lot of space.

  Thank you!

  Sorry, it is not possible to install applications on your card.

  The memory of your device will remain "fluid". The device memory is not like the traditional hard drive you may be accustomed.

  Good luck.

• LocationListener does not receive updates when BrowserField 2 renders in 6.0

  I have an application that calls a mobile web site using BrowserField 2.  The application needs make the current GPS position to the mobile website with each request to the site.

  I used code MultipleFixDemo to get a LocationListener job.  Everything worked very well in the Simulator and all manual updates of location were received by the LocationListener in the application.

  I changed the display to include a component BrowserField 2 and the LocationListener does not update the location of the Simulator.

  Y at - it something I need to do something different when the user interface includes the BrowserField.  Can I have some kind of thread problem?  I only tested on OS 6.0 in the Simulator.  I don't have access to a real device.

  In the code below, I have two defined screens.

  If the pushScreen (new MultipleFixScreen() is uncommented and the pushScreen (new BrowserFieldScreen() is commented out, the LocationListener receives updates.)

  If the pushScreen (newMultpleFixScreen () is commented out and the pushScreen (new BrowserFieldScreen() is uncommented, the LocationListener gets no updates.)

  Here is my code:

  public class MultipleFixDemo extends UiApplication
  {
      private double longitude;
      private double latitude;
      BlackBerryLocationProvider myProvider;
  
      public static void main(String[] args)
      {
          new MultipleFixDemo().enterEventDispatcher();
      }
  
      public MultipleFixDemo()
      {
          startLocationUpdate();
  
          pushScreen(new BrowserFieldScreen());
          //pushScreen(new MultipleFixScreen());
      }
  
     private void startLocationUpdate()
      {
          try
          {
              BlackBerryCriteria myCriteria = new BlackBerryCriteria();
              myCriteria.enableGeolocationWithGPS(BlackBerryCriteria.FASTEST_FIX_PREFERRED);
              try
              {
                  myProvider = (BlackBerryLocationProvider)LocationProvider.getInstance(myCriteria);
  
                  if ( myProvider == null )
                  {
                      Runnable showUnsupportedDialog = new Runnable()
                      {
                          public void run() {
                              Dialog.alert("Location service unsupported, exiting...");
                              System.exit( 1 );
                          }
                      };
                      invokeLater( showUnsupportedDialog );
                  }
                  else
                  {
                      myProvider.setLocationListener(new LocationListenerImpl(), 2, -1, -1);
  
                  }
              }
              catch (LocationException le)
              {
                  System.err.println("Failed to retrieve a location provider");
                  System.err.println(le);
                  System.exit(0);
              }
          }
          catch (UnsupportedOperationException ue)
          {
              System.err.println("Require mode is unavailable");
              System.err.println(ue);
              System.exit(0);
          }
          return;
      }
  
      private class LocationListenerImpl implements LocationListener
      {
          public void locationUpdated(LocationProvider provider, Location location)
          {
              System.out.println("update location called");
              if(location.isValid())
              {
                  longitude = location.getQualifiedCoordinates().getLongitude();
                  latitude = location.getQualifiedCoordinates().getLatitude();
                  float altitude = location.getQualifiedCoordinates().getAltitude();
  
                  StringBuffer sb = new StringBuffer();
                  sb.append("Longitude: ");
                  sb.append(longitude);
                  sb.append("\n");
                  sb.append("Latitude: ");
                  sb.append(latitude);
                  sb.append("\n");
                  sb.append("Altitude: ");
                  sb.append(altitude);
                  sb.append(" m");
                  System.out.println("!!!!!!!Location update: " + sb.toString());
                  //MultipleFixDemo.this.updateLocationScreen(sb.toString());
              }
          }
  
          public void providerStateChanged(LocationProvider provider, int newState)
          {
              System.out.println("providerStateChanged called");
              // Not implemented
          }
      }
  
      class BrowserFieldScreen extends MainScreen
      {
          private BrowserField _browserField;
          private boolean _documentLoaded = false;
          private BrowserFieldRequest _request;
  
          /**
           * Creates a new BrowserFieldScreen object
           * @param request The URI of the content to display in this BrowserFieldScreen
           * @param enableScriptMenu True if a context menu is to be created for this BrowserFieldScreen instance, false otherwise
           */
          public BrowserFieldScreen()
          {
              super(Screen.HORIZONTAL_SCROLL | DEFAULT_CLOSE | DEFAULT_MENU);
              BrowserFieldRequest request = new BrowserFieldRequest("http://www.google.com");
  
              BrowserFieldConfig config = new BrowserFieldConfig();
              _browserField = new BrowserField(config);
              _browserField.addListener(new DemoBrowserListener());
              add(_browserField);
              _request = request;
          }    
  
          /**
           * @see Screen#onUiEngineAttached(boolean)
           */
          protected void onUiEngineAttached(boolean attached)
          {
              if(attached)
              {
                  try
                  {
                      _browserField.requestContent(_request);
                  }
                  catch(Exception e)
                  {
                      deleteAll();
                      add(new LabelField("ERROR:\n\n"));
                      add(new LabelField(e.getMessage()));
                  }
              }
          }
  
          /**
           * Returns this screen's BrowserField object
           * @return This screen's BrowserField object
           */
          public BrowserField getBrowserField()
          {
              return _browserField;
          }
  
          /**
           * A class to listen for BrowserField events
           */
          private class DemoBrowserListener extends BrowserFieldListener
          {
              /**
               * @see BrowserFieldListener#documentCreated(BrowserField, ScriptEngine, Document)
               */
              public void documentLoaded(BrowserField browserField, Document document)
              {
                  _documentLoaded = true;
              }
          }
      }
      private final static class MultipleFixScreen extends MainScreen
      {
          MultipleFixScreen()
          {
              super(DEFAULT_CLOSE | DEFAULT_MENU);
  
              RichTextField instructions = new RichTextField("Waiting for location update...",Field.NON_FOCUSABLE);
              this.add(instructions);
          }
      }
  }
  

  Any suggestions would be greatly appreciated.

  Thank you

  Jackie

  This is a limitation of the BrowserField.  The BrowserField also recorded a LocationListener that is use to power the GPS updates via JavaScript to pages it restores.  This LocationListener / that your application has already registered (given that the application can only record 1).

  There are two ways you can work around this problem.  You can save your LocationListener again after posting the BrowserField.  Note that if you take this approach methods JavaScript GPS won't within your BrowserField.

  The second approach is to poll for updates location, instead of using a LocationListener.  It should continue to work after posting a BrowserField.

• Try to centralize my site...

  Hi all!

  First of all, thanks for checking out my thread in the first place. Now to move on to serious things...

  I tried the centralization of my Web site using two methods. With the center of <>or using a tag < div > around my whole body, but I can't seem to be able to get to the center of the page Web x.x.

  
  So now, that my question is what could I do to fix this?

  If you have need of my site is http://www.djpaintmusic.com

  The dimensions of my site are 1366 x 768, incidentally.

  I hope you can help me with my problem!

  Thank you very much!

  Daniel van der Velden.

  The code I provided is not the actual code for your image, you will need to put it in its place.

  Is your page centered now, just missing the background image? If so, an another glance at the code would help me understand where the error lies.

  APDivs (previously layers) were created in DW (and GoLive) mainly as a marketing ploy. "Designers even without experience can lay a like Quark or InDesign, OMGBBQ pixel perfect page! 1. 1ELEVEN! 11 ".

  Unfortunately, in practice, position: absolute (APDivs allow to position itself) has a lot of weird quirks that cause problems if you do not fully understand the code-behind to use on your html elements.

  The vast majority of cases, to simply not position: absolute. There are times when it is necessary, but they are few and far between. In General, you can create an identical layout using no positioning attribute and css, margins and filling floats. The additional benefit when a browser changes size window, or a user visits your site on a handheld device, is much, much simpler make the site responsive or fluid so it changes to adapt to the size of window / without position: absolute.

  Take the time to get the basics of html and css under your belt. The tutorials at http://www.w3schools.com/css and http://www.w3schools.com/html are a decent starting point. Once you have the basics, for research in css floats, margin, padding and options (e.g. inline, inline-block, table) view more precisely will give you a better idea of how to position elements for modern websites.

  Unfortunately, there is nothing in DW that will do all this for you, really (for the better or the worse), the program assumes that you have a decent handle on html and css (and to a lesser extent, javascript).

• Can't get my submit button to work?

  Hi guys, im new to dreamweaver. I've set up the contact form on html. I also implemented the php code and everything seems fine. I transferred my website and everything is going well except when I fill the contact form and press on submit nothing happens. Someone has ideas on what has gone wrong, I spent a lot of time on it?

  
  

  Thanks a mill for any help in advance

  Well, I have to go out, so not having heard of yours, I won't post the url you sent me,

  rather just paste my answer here:

  The error most important is that your submit button is named 'Submit', but your code mail.php calls for 'submit' (with an "s" in lower case) they must match, then change one or the other as they.

  Then if you look at the code on your page, you will see the name and id attributes differ from many of your input fields, for example

  td>
  
  The too must be the same, AND must match what is in the mail.php file (as it happens all the "name"  attributes are correct, so change the id values to match them.)
  
  Gotta go out now.
  
  Hope that does the trick.  I'll check back later.
  
  --
  
  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• HScrollBar maxScrollPosition bug?

  I have a HScrollBar that sets the position of a cover-flow component.
  
  Everything works fine (the coverflow to scroll bar position adjustment and vice versa).
  
  Scroll bar sets the fine position when you click a position on the scroll bar, use the arrows, but NOT when you drag.
  
  It seems that I can't set the maxScrollPosition dynamically. If I leave it empty the scroll bar is disabled. If I give a default, I can only drag the thumb to this value.
  
  I tested I'll put everything ok as follows:
  
  SpreadScrollbar.maxScrollPosition = issuesSpreads.length;
  trace ("work" + SpreadScrollbar.maxScrollPosition.toString ());
  
  Track prints a correct value (say; 19)
  
  If I set the max position value in the MXML to {issuesSpreads.length} the scroll bar is grayed out new :(
  
  Help, please
  
  Thank you
  
  Rob
  

  I found this bug from the Flex SDK bug tracking system:
  https://bugs.Adobe.com/jira/browse/SDK-11994?page=com.atlassian.JIRA.plugin.System.issueta bpanels:all - tabpanel

  She says that to fix the bug, you can call this function in your scroll bar:
  invalidateDisplayList();

  So it would look like this:
  yourScrollBarId.invalidateDisplayList ();

• My website works fine in Internet EXPLORER and Chrome. When you add an item by clicking on the basket, all OK. Firefox 4 does not work!

  Site has worked very well for a long time. Personally, I use Firefox. To test: select a section, that is B J Minis elements c. click on the basket to the top element and you will get a popup that allows only continue shopping, nothing is added to your shopping cart (order). This means that my website is dead using Firefox. The same operation works fine in Internet EXPLORER and Google Chrome.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the

  I've set up a website in Muse. Any excerpt from fine to preview in a browser. When I download the file to make it live I am getting this error some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. Art seems to be fine and the host site says it's probably coding error. What should I do?

  Hello

  Have you tried a few steps in the following article

  "Some files on the server may be missing or incorrect" Warning Message

  See if that helps. Let me know if you have any question.

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• Website looks fine in the browser, and not in Dreamweaver.

  So here's my problem, it's certainly the associated software.

  I work in dreamweaver CS5 and puts everything in CSS. For some reason, design pushes all of my stuff for the far left crops and even on much of the left side of my site. Well, there is no error in my code that would cause this (that I can see). It works fine in the browser. But everything is pushed to the side (in Design view), and I can't see my left navigation to add items to it. of course, I can go in the code and do it, but it will take longer than I have time for. If anyone knows the solution to this problem?

  If you want to look at the current site go here http://www.imediafilms.com but, even once, it displays in the browser, so this isn't the problem. I checked the FAQ for a solution and found nothing.

  P. S.

  If you're wondering why there are different color boxes, it's just so I can see where I have all the div boxes to.

  Thank you

  Try to set the 'wrapper '.

  left: 0px; instead of right: 320px; and remove the margin: 0 auto;

  {#wrapper}

  margin: 0 auto;
  position: absolute;
  Width: 960px;
  height: 1200px;
  Top: 10px;
  right: 320px;
  do-family: "Arial Black", Gadget, without serif.
  do-size: 14px;
  background-color: #000;
  z-index: 0;
     
  }

  It is an absolute positioning

  If you can't have margin: 0 auto; on this point

  If you insist on the use of components in absolute position (but that's a really bad to use method), they all need the coordinates reported. In the case of your "page_head" and "top_navigation" , they both require left: 0px; added to the css.

  {#page_head}
  background-color: #0F0;
  Width: 960px;
  height: 125px;
  position: absolute;
  top: 35px;.

  }

  {#top_navigation}
  background-color: #F00;
  Width: 960px;
  height: 75px;
  position: absolute;
  top: 150px;
  background-image: url(graphics/navBar.png);
  background-repeat: repeat-x;
  background-position: 50% 50%;
  text-align: left;
  vertical-align: middle;
  z index: 3;
     
  }

  Then, IF you want to center the site in the browser window you ned to wrap the 'wrapper '.

  in it's own wrapper

  . Call it "wrapperContainer" and wrap it around the 'wrapper '.

  :

  
  

  Don't forget to seal at the end of 'wrapper '.

  Tag: (see below)
     
  

  
  

  Then use the underside of css to horizontally Center the drawing in the browser window:

  {#wrapperContainer}
  Width: 960px;
  margin: 0 auto;
  position: relative;
  }