Firefox is having "Script" questions (no response) und eventually Flash issues?

Similar Questions

• How can I change language Firefox without having to download it again?

  Hello
  I would like to know how can I change the language of firefox, without having to download and re - install again. I read there is a way to do it, but I can't find the language file I need to download. (I have firefox in french, and I want to put it in Spanish)
  Thanks for your replies

  You need to download and install both versions first, then you can use the following add-on to switch between these two versions of Firefox:

  https://addons.Mozilla.org/en-us/Firefox/addon/1333/

  I hope that's what you're looking for.

• questions about the uses of flash cs6 and the code that it exports VS. switch to other tools

  I looked at the overviews on the new version of flash and I did experiment a bit with muse and edge of adobe. I have also heard the announcement Friday 4.1 android devices will run is no longer the flash player. my questions are:

  1 does flash cs6 fuction basically the same design-wise, but when it comes to export the file, the code a combination of html and javascript rather than in a solid swf file as it was currently publishing my work as?

  2 East edge meant to supplement flash? or he will take some of the uses of the flash so edge can publish for flash and mobile devices will remain in the area of desktop applications?

  3. If I created full-flash sites in older versions of flash, can I import in cs6 and make them exported as functional across all devices?

  I guess that, overall, just trying to get an overview here so that I can decide how to move forward and what to focus on.

  Thank you!

  1. Yes. The Toolbox for CreateJS is an additional downloadable extension for Flash CS6. He's going to post html and js files that will provide the animation rather than the swf file that you would normally publish. The success or failure of the version of javascript from your animation is the result of the work within the Toolbox. You are a bit constrained in the use of the timeline in Flash for your animations. If you are only working in Actionscript, then the output will be very disappointing.

  2 edge outputs javascript, css and html for you give an animation. The user interface allows you to design within the limits of what can make the border. You can preview and adjust and adjust your animation work you. Edge is a tool of html5. It can create some animation html5. It is not a replacement for Flash. It's something that you can use to integrate the animation in html instead of Flash.

  The problems and the benefits of each are unique. It is a good substitute to learn javascript, css and HTML 5. If you don't understand the code that is created from each of these tools, you can easily end up with huge, inflated, files which improved. I'm very biased towards really knowing what is happening. If I need to change something, I want to be able to enter the code and make a change, do not add an extra piece of code to work around what was there. I don't use any of the timeline, and so nothing of what I publish using CreateJS. Well, he's going to publish, but nothing happens because there is nothing on the timeline to translate.

  You can download a trial version of Flash CS6 and try to box at tools for yourself. Edge is still in free preview, you can get a copy to http://labs.adobe.com and try to see how it works.

  Also, if you do not use the Greensock Animation with Flash platform, take a look at this. It has recently been extended to ensure similar Javascript for most libraries. http://www.greensock.com/

• How to uninstall all versions of Firefox via the script in silent mode?

  I was instructed to remove Firefox to 200 computers in our society for safety reasons.
  I scanned all the computers for versions of firefox installed on them and noticed there are different versions of firefox on our computers.

  I need to be able to uninstall them via our software deployment tool.
  Please let me know if there's a script that can do the job.
  Thank you

  Hello

  Maybe this help you:

  • https://wiki.Mozilla.org/installer:Command_Line_Arguments

• Firefox 14 and JDownloader2 question

  Jdownloader2 and Firefox issues

  Hello!

  About one a month ago I met up with the odd bug or a cut of it.

  When I download with JDownloader2 without browsing with Firefox, everything is ok.
  When I start Firefox, and I start to browse the internet, Firefox cannot open the requsted pages. I get 'bad request', "secure connection cannot be established (on SECURE pages!)", "the connection was reset", instead of the requested page, I see the html code of the page or Firefox wants to download or open the page on the strange way. After a while Firefox is unable to connect anywhere. Even the bar of forecasting tools and Xmarks earns the "lost connection" or "connection failed."
  After a while JDownloader will be 'loose' the connection also. His problem of home considered or connection problem with guests.
  After the closing of the JDownloader2 I close Firefox, therefore no visible window of Firefox or JDownloader seen. BUT, if I sort of relunch of Firefox, it reports that Firefox is already running, and it must be closed first.
  I studied this with Process Explorer and saw that Firefox is really run like Java.exe too. More I couldn't kill an any of them, because access was denied.
  I closed all remaining ports of the JDownloader2 and Firefox, but they process might not be killed anyway.
  I meant the time I noticed, that Windows Explorer has slowed (who has had a total of 5-10 seconds!). The CPU meter gadget showed some strange use of the CPU as 09% 02%, etc.
  I have to restart my PC to solve this problem. Before a month ago, I had no such problems. Kindness and help me solve this problem, please!
  I already have:
  1 uninstall and reinstall Java 7update 5
  2. Uninstall and reinstall JDownloader 2
  3.I have checked the Firewall ZoneAlarm Extreme Security of Firefox, Java, Jawav 10.1.079.000.Every instance and JDownloader 2 has unlimited access to the internet. They are "Super reliable" process. There is no web or similar analysis to turn off. Anyway, I didn't changed anything until this problem occurred.
  Everything is happaning only with Firefox-JDownloader2 combination.
  I have:
  Windows 7 Ultimate SP1 32 bit
  14.01 Firefox
  2 jdownloader
  7Update Java 5
  AMD Athlon II X 2 240, 2.80 Ghz
  4 GB OF RAM

  I was suggested by JIAZ(JD support), it's matter of firewall/av typical. Kaspersky has this before and AntiMalwareBytes.If I'm not mistaken, ZA AV engine is Kaspersky, so I study the problem of the site
  I uninstalled ZoneAlarm Extreme Security 10.1.079.000 and tried to download with JD2 and browsing with Firefox 14.01. I had only a few times that Firefox wants to download or open the page on the strange way, but let say, it works very well with JD2 and Java 7.5.

  I decided to upgrade ZoneAlarm Extreme Security 10.1.079.000 ZoneAlarm Extreme security 10.2.074.000.
  So far, everything works fine! I can download with JD2 (Java 7.5) and browsing with Firefox 14.01 at the same time!

  In addition:

  Version history:
  ZoneAlarm version 10.2.074.000
  Added the: location of Italian language
  ZoneAlarm Extreme Security version 10.2.073.000
  Optimized: Installer, installation of component order
  ZoneAlarm Extreme Security version 10.2.072.000
  Added: 14 Firefox Support
  Fix a problem: fix configuration Chrome
  Fix a problem: ZA Free, easy to use Messaging improvements
  ZoneAlarm Extreme Security version 10.2.068.000
  Added: 14 Firefox Support
  Added the: stop all the option of internet activity
  Added: Snooze AV or firewall for 5 minutes option
  Improved: Toolbar security
  Improved: Antivirus engine
  Improved: Installer
  Fix a problem: Riskware options usability
  Fix a problem: other improvements and corrections

  It was my fault! Sorry! Thank you for your time and effort! Maybe this question will also help someone else...

• Script question

  I use the JavaScript below to close the browser for my booth - it works for IE but not FF - suggestions?

  <script>
  function closeTop()
  {
    var top = window.open("", "_top");
    top.close();
  }
  </script>
  
  <a href="javascript:closeTop()"> Close </a>

  When Firefox gives him a warning, the user does not see it seems that in the error Console.

  Can we have users launch the training using window.open() module in another page, or can only be launched by starting Firefox?

• Clean install of windows 7 and firefox 4, java script works does not on various websites

  A clean installation of windows 7 and firefox 4, there is a problem with java script, so far noticed on bbc iplayer (videos do not play) and ebay (pop-up menu options on pages like 'my ebay summary' just don't pop up), everything works fine in internet explore?
  tried safe mode, tried with and without flash and java runtime, everying of compensation has tried, tried to load the settings of internet explore...
  WON'T WORK!

  You have security software with enhanced settings that can block JavaScript in Firefox?

  Create a new profile as a test to see if your profile is the source of the problems.

  See:

  • Basic troubleshooting: make a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Windows Live Mail is having problems retrieving messages responses from friends.

  original title: WLM problem

  I use Windows live mail and have come across a problem of recovery of mail. I sent an email to 20 friends with an invitation to golf and requires an immediate response. When I got no response after 24 hours, I sent the message. Still no answer. I called every friend and they all said that they responded to my email. For several days they sent responses and I have yet to receive all the emails on my desktop, laptop or smart phone. I get the other mail, just nothing about the invitation to golf. I think the server WLM failed me. Any ideas?  Roger of TX

  Hello

  Given that the problem is related to Windows Live mail, I suggest you to post the question in the forums and check them off below if it helps:

  http://windowslivehelp.com/solutions.aspx?ProductID=1

  It will be useful.

• Scripting question - how do you close an application

  I got an excellent script by Bill James that opens a series of requests after having timed delays (see below). I would like to adapt the script to CLOSE an application that has been opened, but does not know how to do this. Any tips? Thank you

  PJS

  Script delay, Bill James (http://billsway.com/vbspage/)

  SecondsToDelay = '5 '.
  ProgramToRun = 'iexplore' [insert the full path]
  Wscript.Sleep(SecondsToDelay * 1000)
  PROG = Chr (34) & ProgramToRun & Chr (34)
  CreateObject ("WScript.Shell"). Run (Prog)

  SecondsToDelay = "10".
  ProgramToRun = 'winword' [insert the full path]
  Wscript.Sleep(SecondsToDelay * 1000)
  PROG = Chr (34) & ProgramToRun & Chr (34)
  CreateObject ("WScript.Shell"). Run (Prog)

  Thank you. Will do.

  PJS

• Script Question of calculation tables.

  Hello, I'm not sure that it is still possible, but is it possible to have a table from indesign Calculate column B and column C for example.  Here's how its implementation.

  JOB #	#up	NECESSARY	TOTAL
  JOB1	5	500	* formula to multiply the B2 - and C2.*
  JOB2	3	250	* formula to multiply B3 - and C3.*

  and so on until 14 rows.

  I looked in the Indesign forum and didn't see where it was available in the program itself.  SO I hope theres a way to do this in a script.  I'm having 14 rows if all what matters.

  Thanks for any help.

  Have you thought about this: Calculations Raynaux - calculation in tables Indesign CS Script

  HTH

  Loïc

  www.ozalto.com

• Get the challenge questions and responses of OIM 11 g PS2 (11.1.2.2.0) using a code

  Hello

  I have to write code to pick up the challenge question and answer for a user (a user has only a matter of challenge), that's the feature 'Reset password', I have to create a webservice that can retrieve this information for the portal application (it is that we have a custom interface). My webservice was working fine until 11g PS1 I could to the query table "DMP" and get relevant data for the user, but after upgrading to 11g PS2 (11.1.2.2.0) the old code does not work it is back * to challenge and answer question.  So, I updated the code, now instead of directly querying table PCQ I use the API of the IOM, I am able to make the issue of the challenge for a user by using the getChallengesForUser method, but I don't know how to recover the answer to this question...  Please help it is a little urgent.

  PS. : If the soil is to use the getChallengesForLoggedInUser method if you please how can I create a session in the same method for the user.

  Concerning

  Dheeraj

  Code snippet:

  oimConn = new OIMConnect();

  Customer OIMClient = oimConn.connect ();

  usrMgr = client.getService (UserManager.class);

  ChallengeResponseService responseServi = (ChallengeResponseService.class) client.getService;

  ClientSession = client.getService (ClientLoginSessionService.class) ClientLoginSessionService;

  System.out.println ("inside the getSecretQues()...");

  System.out.println ("inside the getSecretQues ()... userId..." + userId);

  clientSession.loginSessionCreated (userId);     I thought that it would create a user login session so that I could use 'getChallengesForLoggedInUser '.

  Set setForQues = responseServi.getChallengesForUser (username, Locale.US);

  Iterator setForQuesItr = setForQues.iterator ();

  If (setForQues.Size () > 0)

  {

  Defy challQuestion = (Challenge) setForQuesItr.next ();

  question = challQuestion.getDisplayValue (); This works very well and retrieves the question

  }

  The code below is to get the answer works but doesn't

  SER value = responseServi.getChallengesForLoggedInUser (Locale.US);

  Object [] challengeQuesAns = ser.toArray ();

  for (co int = 0; co < challengeQuesAns.length; ++ co)

  {

  Defy challengeAns is challengeQuesAns (Challenge) [co];.

  System.out.println ("Inside getSecretQues ()... challengeQuesAns..." + challengeAns.getId () + "" + challengeAns.getResponse () + "" + challengeAns.getResponse ());

  If ((challengeAns.getDisplayValue (). Equals (question)))

  {

  response = challengeAns.getResponse ();

  }

  }

  clientSession.loginSessionDestroyed (userId);

  Can you try below extracted and see if you are able to print the answer decrypted?

  try {}

  tcUserOperationsIntf userOperationsIntf = (tcUserOperationsIntf) oimClient

  .getService (tcUserOperationsIntf.class);

  resultSet tcResultSet = userOperationsIntf

  .getChallengeValuesForUser (Long.parseLong (take));

  If ((resultSet == null) |) ((resultSet.isEmpty ())) {

  System.out.println ("the ResultSet is empty or null");

  Return challengeQuestionAnswers;

  }

  rowCount int = resultSet.getRowCount ();

  for (int j = 0; j)< rowcount;="" j++)="">

  resultSet.goToRow (j);

  String columnNames = resultSet.getColumnNames ();

  for (int i = 0; i)< columnnames.length;="" i++)="">

  String question = resultSet

  .getStringValue ("Users.Password challenge Question.Question");

  String response = resultSet

  .getStringValue ("Users.Password challenge Question.Answer");

  challengeQuestionAnswers.put (question, answer);

  }

  }

  } catch (Exception e) {}

  e.printStackTrace ();

  }

• SQL GROUP BY / HAVING a question

  Hello

  A few days earlier, I came across an interview question that I can not resolve correctly.

  In short, there are two tables: BOOKS and TAGS.

  ID	TITLE	AUTHOR
  1	Twilight	Stephenie Meyer
  2	Catch fire	Suzanne Collins
  3	Animal farm	George Orwell

  BOOK_ID	TAG
  1	Best Seller
  1	Science Fiction
  1	TOP10
  2	Best Seller
  2	Note.
  2	TOP10
  3	TOP110

  However several tags and the result must be a set of appropriate books, users can enter.

  For example, in the case of tags 'Best Seller', 'Science Fiction' and 'Top 10', the result must be "Twilight."

  My solution was something like this:

  SELECT b.title
  FROM books b
  WHERE
      b.id IN (
          SELECT book_id
          FROM tags
          WHERE
              LOWER(tag) = 'best seller'
      )
      AND b.id IN (
          SELECT book_id
          FROM tags
          WHERE
              LOWER(tag) = 'science fiction'
      )
      AND b.id IN (
          SELECT book_id
          FROM tags
          WHERE
              LOWER(tag) = 'top10'
      )
  
  
  
  
  
  
  

  But it is definetaly not an elegant and flexible query. In the case of labels of 10 or more incoming, we get a code 'spagetti '.

  Somehow, it should be possible to resolve using GROUP BY and HAVING, but I don't really know how.

  Could someone help what would be the most elegant solution to this problem?

  Thank you so much in advance.

  Maybe:

  SQL >-generating sample data:

  SQL > with books like)

  2. select id 1, the title of 'Twilight', author of "Stephenie Meyer" Union double all the

  3 select 2, "Taking fire", "Suzanne Collins' Union double all the

  4 Select 3, 'Animal Farm', 'George Orwell' of the double

  5)

  6, tags such as)

  7 select 1 book_id, tag "Best Seller" of all the double union

  8. Select 1, 'Science Fiction' from dual union all

  9. Select 1, 'TOP10' from dual union all

  10. Select 2, 'Best Seller' from dual union all

  11. Select 2, 'Roman' from dual union all

  12. Select 2, 'TOP10' from dual union all

  13. Select 3, 'TOP110' from dual

  14)

  15-

  16 - the actual query:

  17-

  18 select b.title

  Books b 19

  20, tags t

  21 where t.book_id = b.id

  22 and t.tag ('Best Seller', 'Science Fiction', 'Top 10')

  23 by b.title group

  24 after having count (*) = 3

  25.

  TITLE

  -------------

  Twilight

  1 selected line.

• Multiple choice questions: "Advanced response Option" went when changing multiple response

  Hello

  I have a multiple choice question and each answer has a check box to enable the option Advanced answer.

  I have another question multiple choice and the advanced answer option is not there--not that gray... is simply not there. The only difference I see between these issues is that one of them is to have several correct answers (2 of 4 correct) while the first MCQ has only one correct answer on 4.

  Any ideas why this is missing?

  Advanced response option is available for only one correct answer. Only one

  custom question slide can give you that control.

• 10.2 ATG with sendEmail script question

  Hi all

  I use ATG10.2, and I have created a registry script that sends an email, welcome as email of new records.

  I have configured all the smtp properties, but the email is not send. I checked the property of the EmailEtat function in the profile, and it's valid status.

  I don't have any error, and debug component scenarioManager I saw that the event is atg.dps.Register, it seems.

  But I got this in my debug as:

  "the individual instances 0 were found for the user object: 4604715.

  Any idea?

  Thanks in advance

  Not sure what exactly is the problem in your environment, but just throw in some ideas... TemplateEmailSender has a property to send emails in the same thread. You can check that I think that for the events of local scenario it can be safely set to false.

  Try to set dummyMode to true in SMTPEmail and check if you can see all of the markup of your email template rendered in the console ports server logs / every time e-mail action is triggered. I say this just to confirm that e-mail action is getting triggered after each event registration, so we're good up to this point. Sometimes, if you have multiple instances of ATG to connect to the same database, it is possible an instance of thugs (who might have been saved as ESG/PES) may out messages before internal event queue JMS gets it a legitimate server. So be sure that you are not running in this kind of situation.

  In the ATG, when e-mail messages are sent using sender of model, an HTTP request is generated and maintained to make the JSP email template. So another area, you can watch it if any custom pipeline servlet which is originally a question because this request goes through the pipeline.

• VM model deployment Script Questions

  I found a script to launch some virtual machines from a template via the import-csv via this script:

  $vms = Import-CSV C:\Scripts\NewVMs.csv
  
   
  
  foreach ($vm in $vms){
  
        $Template = Get-Template $vm.template
  
        $VMHost = Get-VMHost $vm.host
  
        $Datastore = Get-Datastore $vm.datastore
  
        $OSCustomization = Get-OSCustomizationSpec $vm.customization
  
        New-VM -Name $vm.name -OSCustomizationSpec $OSCustomization `
          -Template $Template -VMHost $VMHost -Datastore $Datastore -RunAsync
  
  }
  

  I have a few questions...

  I would like to add the virtual machine to a cluster of data store (running esxi 5.0) and not a specific datastore... not sure the powercli command to do this, I guess I would replace just datastore in the script with X X being any cluster data store are called in the cmdlet.

  I want to add to a real cluster, not a VMHOST... and I'm not sure the order to replace VMHOST with...

  Is it possible to add RAM, CPU and the location of the folder to put the virtual machine in this script? Obviously I would need to add those in the excel file.

  Any help would be appreciated.

  Thank you!

  You can pass a name of DSC on the parameter data store.