Firefox on Win XP does not connect after update! Possible causes?

Similar Questions

• Citrix Access Gateway does not connect after update June 17

  I am running Citrix Access Gateway on a Windows 7 64-bit Client computer and as updates on 17 June, it does not connect.

  Have you checked with Citrix technical support? This would be my first step. If they cannot help, contact the technical support of MS for Windows Update.

  Support for Windows Update -http://support.microsoft.com/gp/wusupport

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you are not in the Canada or the United States, there are numbers to contact local support here:http://support.microsoft.com/common/international.aspx
  MS - MVP - Elephant Boy computers - don't panic!

• EMCC OUI(Win 2012) does not restart after updates.

  Hello

  I am trying to install the EMCC 12.1.0.4 on a virtual machine in Windows Server 2012 hosted on an ESXi server. Previously installed without getting updates completed without any problems. Because some features did not work properly, I decided to install once more and also get updates from Oracle. I followed the directions of advanced installation. The virtual machine has been reset to the stage before. So no installation is dirty.

  After getting updates and display the patches Oracle Setup calls a Windows saying that the installer will be restarted. But it's not. I waited and waited, but nothing happened.

  Newspapers shows the first steps after the restart and no other error. I tried several other approaches:

  1. download the updates from the server to install and use my credentials for Metalink

  2. use the option - ignoresysprereqs

  3 use the option - showProxy

  4. download updates on another server using the option - downloadUpdates as the copy on the server to win 2012.

  In all cases the same behavior:

  After you click OK in the windows message saying that will follow a restart of the installation, the installation program restarts, a command window is displayed for 1-2 seconds, then everything stops.

  I have everything running as administrator.

  See below the last lines of my log file of the inventory from the last test.

  INFO: 18.05.15 13:12:05 CENTRAL: already downloaded updates is selected.

  INFO: 18.05.15 13:12:05 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:05 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  INFO: 18.05.15 13:12:05 CENTRAL: all the fields are valid

  INFO: 18.05.15 13:12:05 CENTRAL: POPUP of WARNING: Das Installationsprogramm wird neu gestartet.

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug 14045804 YES

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug OPatch-1

  INFO: 18.05.15 13:12:17 CENTRAL: XML download location: null

  INFO: 18.05.15 13:12:17 CENTRAL: the file path is C:\Users\Administrator\defaultProperties.PROPERTIES

  INFO: 18.05.15 13:12:17 CENTRAL: Scratch Path = C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46 h

  INFO: 18.05.15 13:12:17 CENTRAL:-scratchPath

  INFO: 18.05.15 13:12:17 CENTRAL: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM

  INFO: 18.05.15 13:12:17 CENTRAL:-sourceLoc

  INFO: 18.05.15 13:12:17 CENTRAL: C:\temp\emcc_install\install\... /stage/Products.Xml

  INFO: 18.05.15 13:12:17 CENTRAL: sourceType.

  INFO: 18.05.15 13:12:17 CENTRAL: network

  INFO: 18.05.15 13:12:17 CENTRAL:-timestamp

  INFO: 18.05.15 13:12:17 CENTRAL: 2015-05-18_01-07-46 H

  INFO: 18.05.15 13:12:17 CENTRAL:-ignoresysprereqs

  INFO: 18.05.15 13:12:17 CENTRAL: RESTART command: line cmd /c C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/install\setup rscratchPath - C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM - rtimestamp 2015-05-18_01-07-46 h - rstartupLoc c:\temp\emcc_install\install-redemarrer - ouifromLocation C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\products.xml - ouiResponseFile C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\Response\oracle.swd.Complete.rsp - ignoresysprereqs - paramFile C:\Users\ADMINI~1\AppData\Local\Temp\2\ OraInstall2015-05-18_-07/01/46 PM/temp.ini - jreLoc C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\jdk/jre - J - Doracle.installer.extjre = false

  Test auto-updates to date: using paramFile: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\temp.ini

  Check the swap space: must be greater than 150 MB.   Real 5625 MB passed

  Monitor: must be configured to display at least 256 colors.    4294967296 real past

  The command line to decompress:

  C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1\install\unzip - qqqo... \stage\Components\oracle. SWD.oui\12.1.0.1.0\1\DataFiles/"*.jar" d "C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM" INFO: 18.05.15 13:12:22 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:22 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  So, if someone met sam ahint problem would be appreciated.

  Best regards

  Cantemir

  Hello

  a realization to the description in my question:

  The list of patches to install was the following:

  Patch 19337487 for the Service of management of Oracle for 12G

  Patch 19003055 for the Service of management of Oracle for 12G

  Patch 19519190 for the Service of management of Oracle for 12G

  BASIC 20392036 ENTERPRISE platform MANAGER - SGD 12.1.0.4.3 PSU (GENERIC)(System Patch)

  Updated 14045804 YES

  And I was able to capture the contents of the command window that appears for 1-3 seconds prior to YES.

  Are more errors saying:

  ...

  error: cannot remove the old c:\Users\Admini~1\AppData\Local\Temp\2\OraInstall2015-05-18_02_04_18PM\oui\jlib\xml.jar

  ...

  YES updates patch would probably come in conflict with the running configuration.

  In any case have not yet no solution.

  Cantemir

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

  This may be caused by the Tab Mix Plus extension

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to install the latest Dev version of Tab Mix more if you use this extension.

  See the sticky on the forum of Tab Mix Plus:

  • http://tmp.garyr.NET/forum/viewforum.php?f=3
  • http://tmp.garyr.NET/forum/viewtopic.php?f=3 & t = 15740

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• autorotation does not work after update 8, 1 wind - W510

  

  I have a tablet with docking station and 32 GB w510

  the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

  I ve installed the latest driver form acer download page and Windows update.

  then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

  What can I do?

  PS the camera does not work

  

  -solution for me! ----

  I don't know what happened, but I'll tell you what I did not last:

  I have the European version of Windows 8.1 N(without Media Feature Pack)

  1. reinstalled microsoft silverlight.
  2. search for update---> silverlight update available!---> installed!
  3. reset
  4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
  5. reset
  6. Search again---> new available updates updates---> installed
  7. reset!

  now, camera, autorotation and all the apps work for me. I hope this will help you

  Best regards

• Dual booting of Z3 tone does not work after update Marshmallow

  Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

  I don't think he has a...

• Gyro does not work after update 6 Android on z3 D6633 double

  Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

  Issue edited by Rickard

  @dipuvellara

  Could you try to restart in safe mode and test again?

• First Adobe Pro CC does not work after update code 0xc000001d

  First Adobe Pro CC does not work after update code 0xc000001d

  W7 OS 2

  Hi Gernots,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Motorola surfboard SB5101 modem does not connect after loading Win 7 OS

  I had Win XP 32 bit and have now updated for Win 7 64 bit (I have a 64-bit processor) now my computer does not connect to my modem - Motorola Surfboard SB5101 even if styling check here says it should be OK.  When I try to connect I get this error: failed to connect #651, modem or other reporting device connection error.

  My service provider could not help and said my signal to connect is good.  I loaded the new drivers Vista 64 for my modem as it was the only rider to a 64 bit OS that I could find, in the hope that it would help.  No chance here no more.  Any suggestions?

  I guess that you connect the modem to your computer with a USB cable.  If your modem has an Ethernet output, use it instead.  The Ethernet connection does not require a pilot program and is more reliable than the USB connection.

• Firefox Sync does not login after update form 33.1.1 in 34.0.5

  Mozilla Firefox for Windows 34.0.5. After update 33.1.1 Sync no longer works, does not automatically connect (re-connect to Sync is shown instead of the name of account synchronization). Reconnection to sync works only for the current session (restart Firefox disable auto login). No error opens a session on the wave\logs directory.

  Thank you for your help.

  Best regards.

  GLo said

  Mozilla Firefox for Windows 34.0.5. After update 33.1.1 Sync no longer works, does not automatically connect (re-connect to Sync is shown instead of the name of account synchronization). Reconnection to sync works only for the current session (restart Firefox disable auto login). No error opens a session on the wave\logs directory.

  Thank you for your help.

  Best regards.

  https://support.Mozilla.org/en-us/KB/Firefox-sync-troubleshooting-and-tips#w_firefox-sync-resets-every-time-i-close-Firefox_2

  It works for me.

• Dashlane module does not work after updating firefox 33.1.1

  The add-on dashlane does not work after last update of firefox for 33.1.1. Gray Impala stays and seems to be offline. Re-install the add-in dashlane does not work, delete also en reinstall firefox does not work.
  I am running dashlane and firefox on mac 10.10.1

  Solved!
  Today there was an update of dashlane in the app store; This was the solution for this problem.

  Thank you