Firefox only loads in safe mode. Fails every time.

Similar Questions

• my new construction with original hard drive, running 32-bit XP only loads in safe mode.

  I'M USING MY HDD TO MY ACER SA80 TOWER IN A NEW CORSAIR 800 D ROUND. MY MOTHERBOARD IS AN M4A785-M. RAM OF 4 GB COSAIR. THE HARD DRIVE has the XP 32 bit. IT IS SUPPORT OF SECURITY BUT NOT NORMAL BOOT MODE. DO I HAVE TO BUY A NEW OPERATING SYSTEM SO THAT THIS WORK? THIS IS MY FIRST BUILD.

  The license for Windows XP is * not * transferable to another computer agreement [EULA] - it is bound to the machine, it was originally installed on.

  You must perform a repair Installation to operate-, but you also have to purchase a license for your new system.

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• XP will only start in safe mode after service pk 3 install, mdule Eventvwr say service command failed

  After a clean install of windows xp family, with nothing but Pctools virus installed and disabled, Xp will only start in safe mode, all 3 choices, it does not start in Msconfig service diagnosis either. Eventvwr said service control module has failed. I tried to uncheck that service figure, but he said that the computer will not start if it is disabled. I uninstalled 3 times and reinstalled with the same results. A last one being a service pk 3 that I downloaded and installed in safe mode.

  It has been installed and working before the clean install of windows with pk3. I removed the patration from the hard drive, write 000 to the dick and reformatted before clean install of xp. It will work with service pk 2 is installed.

  I checked the forums and he Goggled and could not find a solution

  any help will be appreciated

  E-mail address is removed from the privacy *.

  Boris

  You must install SP3 before you install your antivirus program. This can be done safely by downloading the file in advance and install while physically disconnected from the Internet. In addition, you should keep IE at the level before installing SP3 IE6.

  Link to the standalone SP3 Installer file:

  http://www.Microsoft.com/download/en/details.aspx?ID=24

• start-up after norton install fails can only start in safe mode

  I don't know how this problem started, I got a blue screen on startup, start single icould my pc in safe mode.

  The only way I could use my pc was to do a system restore.

  At this point, I have lost Norton 360 v 3?

  I contacted norton and they have been very helpful, they re-installed norton remotely.

  they are just me to reboot my pc

  My pc is restarted, I got the blue screen and could only restart in safe mode, I had to again, restore the system to get online and I lost norton, but the Startup icons are still there.

  The problem may be caused by the incompatible Norton (Symantec) with the hardware or software you installed recently.

  Uninstall Norton (Symantec) in Mode completely safe
  

  ==========================================

  1. reboot the computer and start pressing the F8 on the keyboard key. On a computer that is configured to start to multiple operating systems, please press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any user account with administrator privileges.

  To uninstall Norton Internet Security, please run Norton Removal Tool.

  Note: If the following tool cannot be downloaded via Safe Mode, I suggest we first download it on a different computer and then copy it to the problematic original computer to install it.

  4. Please visit the following Web site to download the tool:

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  5. save the tool for Windows Vista desktop.

  6. run the tool according to the instructions on the Web site.

  7 restart the computer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• SP3 update: problems, can only start in safe mode

  Windows XP Home Edition: update to SP3, in the hope that it would, among other things, allow me to install the windows update service. Unfortunately, I can only boot in safe mode. If I try the normal startup, it goes into a boot loop. By that I mean that he tries to startup that fails, she tries again, then fails and just keep the loop. All of the answers.
  The only way I see is to uninstall, and which may not be the right answer.

  Hi, Harvey,.

  Try the solution given by DenyB:

  "Installation disk to boot into the Windows XP Recovery console. He asks which disk you want to access and the Admin password (if you do not have a fair shot of password to enter). "Then type: COPY C:\WINDOWS\SERVICEPACKFILES\i386\gdi32.dll (1 place) C:\WINDOWS\SYSTEM32\gdi32.dll press enter crush Y (Yes) press enter type EXIT reboot should Do It."

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• How do I Start Up Firefox 14.01 in safe mode, with all the Add ons disabled, if do not have to restart?

  Using Dell PC/Windows XP. I love how Firefox is running in SafeMode so inflated as usual. I would like to be able to start Firefox in safe mode, without having to always restart Firefox to get in safe mode. Anyway to do it? Thank you very much!!!

  Ok. Thank you guys created and a new profile and restarted and all kind of memory freed, but of course Firefox is practically naked, so is expected.
  Checked the plugins and extensions, no major problems that are not there, I could see. I have a Gig of RAM installed around a little more, do not think I can add as many more on my old Dell PC of 2005. So I'll just switch to Firefox Safe mode when memory begins to be tight. Thanks again guys for all the good info!

• Re: Toshiba L305 Satellite 1) screen is messed up and only start in safe mode

  * HELP! *

  Windows starts only in safe mode or safe mode with network. My screen is messed up (black and gray with horizontal lines and the screen looks like it scrolls continuously).

  I connected the laptop to an external monitor and it still does not start normally and I need to recover contacts from my iphone from itunes.

  Is there something I can do? I really don't want to lose all my contacts! I have to remove the hard drive and it burst in another machine and try to start windows normally to have access to my current drive with all the data that is on it, but I don't know if it works or if it's a bad idea.

  What could be causing the screen get all dirtied upwards and at the same time windows does not start normally? I have never had a virus before problems!

  Help! Thanks :)

  Hello

  > Windows will only start in safe mode or safe mode with networking

  It seems that the bootmanger is corrupt or something like this

  > I really don't want to lose all my contacts!

  I know, I Safe mode, you have access to all data on the hard drive. So, you can move all the important data on USB or on the partition (if available) 2 nd on your hard drive and you don't need to remove the hard drive
  Then you can reinstall Windows with a recovery disc or by using the disk copy of Win. This is the best solution in your case, try to fix windows can take a lot of time as a new installation.

• WiFi MiniPCI card only works in "Safe Mode with network.

  AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
  In 'normal' mode, it freezes my laptop after a few seconds.

  Hello

  Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?

  At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.

  Give us more information.

• blue screen - only works in safe mode

  I have a 1545 inspiron 1545 lap top only woks in safe mode are tried system don't restore chance andre, I can do?

  [Moved from comments]

  Hi Tony,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  1. what operating system is installed on your computer?

  2. What is the code in the exact error message or Blue Screen of Death?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

  I also suggest you follow the steps mentioned in the link below which may help you in the matter of fixing.

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

  1. click on Start, point to settingsand then click Control Panel.

  2. double-click on system.

  3. click on the tab Advanced and then click settings under Startup and recovery.

  4. in the Write debugging information list, click partial dump (64 KB).

  For reference:

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

  I hope that the information above helps you.

• Computer hangs, reboot, can only start in safe mode

  Original title:-i can only start in safe mode

  Ive tried to use several restore points but when I try to reboot the computer freezes and I have to start in safe mode

  Safe mode is a mode where Windows works only the bare minimum programs and processes necessary to the performance of your system.  When you start in Normal mode, many more processes and applications running.  At least one of these programs or process causes your computer to crash.  If your task is to identify this program/process and, at least temporarily, to prevent it from running at startup.  Microsoft has a tool that you can use to selectively disable or or the process that normally run at startup called "msconfig".  It can be a long and exhausting iterative process of turning things off and restart to see if it you fixed program, but that's what you do:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"

  <>http://support.Microsoft.com/kb/310560/en-us >

  First, disable all items "start-up".  If it does not, set it to 'Services '.  If this does not work, then reactivate some of them and try again until you zero - in on the culprit.

  HTH,

  JW

• computer will only start in safe mode, always samekh in normal mode

  Original title: help

  computer will only start in safe mode, always samekh in normal mode.any ideas?

  Hello

  do this work in Mode safe mode with networking:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.