FireSIGHT Eval License Management Center

Similar Questions

• Power of fire licensing management center

  I'm someone who is confused by the license, I hope someone can clarify this.

  I have a Cisco ASA5506X test setup that has the URL, AMP, IPS key installed via ASDM.

  I downloaded the power of fire. Mgmt Center 6.1.0 VM and tried to connect to the ASA.

  I wanted to use the eval. period of check of FMC.

  However, it seems that the licensing of the ASA does not apply to the CSP. Can I need separate licenses for FMC in addition to those on the SAA or do I have to reinstall these licenses on the CMF?

  You must first register the ASA of CMF (and vice versa) and then apply the CME licenses ASA newly managed.

  Licenses of firepower are linked to the license key (combination of model platform ID and MAC address) of the FMC Manager so you should rehost those you used initially ASDM.

  You can only manage a service module firepower since one - or the CMF-based ASDM - Manager at a time.

• Power of fire vs NGIPS vs FireSight vs power of fire management center

  I am struggling to understand the distinction between these terms. Is anyone able to help me understand what are the components?

  Firepower is the term that Cisco uses during most of the acquis of Sourcefire products.

  FMC

  Power of fire aka Firesight Management Center aka Defense Center Management Center.
  Power of fire management centre was re-branded twice, its all the same

  Centralized management for devices of firepower (NGIPS, Module of ASA firepower, DFT)

  NGIPS

  Dedicated appliance IPS / IPS component of the solution of firepower (also used on the firepower of ASA and DFT module)

  ASA with power of Fire Services

  ASA with module of software/hardware that is running the services of firepower. (is two different images running on the same box. Traffic is redirected to the module of firepower for Layer 7 inspection)

  FTD

  Power of fire Threat Defense is the new unified combining image Software ASA and firepower into a single image. (not full parity of features to ASA still)

  If you need more let me know.

• Cisco Firesight time management center

  Hello

  Is it possible to change the time on Cisco Firesight Management Center after that I'm done with the initial configuration. I need to change the time zone again as it has been set to an incorrect value, and I can't find an option to do so.  We manage the system on an ESXi and I can access the CLI console as well

  Kind regards

  IT is defined by the user (top right of the CMF GUI)) > user preferences > time zone preference.

• The traffic load between the power of Cisco ASA and FireSight Management Center fire

  Hi all

  I have a stupid question to ask.

  Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

  Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

  Maybe you all have no idea to provide.

  It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

  Generally it is not a heavy load, however.

• Do need me a license Eval for V-center 5.1 of the trial?

  Hello

  I put to level my Vcenter 4.x installation of production 5.1. (and later ESXi have what license)

  I intsalled unique signature and inventory services and is now trying to upgrade V-Center

  I don't have new license yet, if I update now and do not add a license, it will continue to work to

  another 30-60 days?

  Or do I need to add Eval license for now?

  Thank you

  Hello

  If you do not enter a key to vCenter 5 during the upgrade, the vCenter enters a trial of 60 days on its own mode. No need to get an eval license anywhere.

  Concerning

• Microsoft Volume Licensing Activation Center Automated Dialer India activation system is broken, how do I activate my Windows again?

  My Windows 7 Home Premium desktop motherboard no longer works and I replaced it with a new one.

  After that, I see a prompt to activate windows again. I tried to enter the windows product key, but it returns an error 0xC004008 (the activation server determined that the specified product key cannot be used).

  Then I tried calling Microsoft India automated Dialer numbers (http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx), he automated system after taking the 54 figure fails installation ID and responds "Sorry there is a technical problem with the system, please try again later.

  I also tried to contact the management of MS tech support, they work only Monday-Friday (9-6), this is ridiculous, given that everyone has a call 24 / 7 Center these days. This installation is on my home PC and I can't be available on weekdays, in their working time limited to talk to a tech support Executive.

  Microsoft India, please check your systems, Automated Dialer activation for your Volume License Activation Center system is down and you have a customer support 24 / 7! It is disappointing the customer point of view.

  Please help me to reactivate my windows before the expiration of 30 days. Kind regards
  Prashant

  You will need to use the Activation of the operator in any case after replacing the motherboard.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Cannot find license manager

  We just bought vCenter Server and vSphere licenses.  When I put the codes in my trial vCenter server it tells me that I need a license server.  I couldn't find what the license server.  I tried turning on itself and that seems to hold, but when I try to add hosts to my data center I get now

  "Impossible to license because the license source is not available: the License Manager has not yet been started, the wrong file license or port@host is used, or the hostname or port in the license file has been changed.

  Is there documentation on how to implement the "License Manager"?  Doing some research I found a lot of References .lic file and one (I forgot the exact name) VM - License.exe.  But neither were part of the 60-trial download and the sons were often for version 2.5.

  I think that's what you're looking for

  http://downloads.VMware.com/d/info/datacenter_downloads/vmware_infrastructure_3/3_5#drivers_tools

• Equium U400 - lack of something as Management Center

  Guys I need your help,

  I lost my recovery disc and I installed vista and drivers again by myself
  I installed everything that was on the list under my laptop which is u400-146 and I still lack some programs

  I got program I was like Management Center for laptop, I was able to adjust the speed of the brightness of the fan on the processor speed of cd, hard drive, hour after
  reverythig has been automatically swich off, it was like a large Center to do.

  Now, I have a few small programs... but they are not controll that. !

  and I can't start the media buttons on the top of the laptop, someone help?

  am I missing something?

  Hello

  Are you using Vista?
  If Yes, then you must make sure that these tools have been installed:

  -Hardware configuration
  This tool allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use.

  -The tiles for Mobility Center
  This driver is an add-on of Toshiba to customize the mobility Center.

  -Value Added Package
  This package installs a range of important public services.

  Check this box!

• Can the License Manager load the computer license first, instead of the license based on users?

  We have several machines in the lab with licenses computerized on them and a number of technicians who have licenses based on users. When he signed from time to time as themselves, instead of the generic service account, a technician of the License Manager fits on the machine their user account. Not a problem until they're trying to connect to their own PC again LabVIEW and they get the trial of 14 days notice period.

  Is there a way the License Manager looking for the license to the computer first instead of the user license?

  Thanks for any help.

  Joe

  Hey Joe,

  In the license file on the license server, you may be able to manually change the tag "sort" in the file to change the order in which VLM withdraws licenses. Licenses are checked in descending (2, then 3, then 4, etc.). As a general rule, your license file is set up in a default order, but in special cases like this, it may be advantageous to change the order. To do this, follow these steps:

  1. open the license file with a text editor (such as Notepad)

  2. search for the tag "flows out". For example, the entry "VLM_Core" will sort tag value will appear as "sort = first". Do not change this value. VLM_Core must always be the first.

  3. change the value of sorting tag for the license to the computer named to a value less than the value of sorting tag for the named user license. (for example 'sort = 2"for named computer and 'sort = 3" to the named user).

  4 save the file and reinstall the license.

  Let me know if you have any questions!

• License Manager NOR does not; It performs a query for the current license status, said

  I currently have the evaluation version of Labview. I tried to use a volume of my University license by typing the name of the server in the License Manager NEITHER, but after that, whenever I try to open the License Manager, it seems that he has slain saying "question the current state of the license" and never actually opens. Also, when I try to open Labview, it freezes during the completion of the installation. Later, I realized that students have no access to the license of the University for their own PC, so I can't use this license in volume anyway.

  I uninstalled everything related with NEITHER on my PC and reinstalled the evaluation version of Labview, but the same problem still exists. Is there something I could do also wipe my hard drive?

  Nevermind, it works now. I could go back to a system restore point before the problem started, and that fixed it. Well, what happened was the License Manager could not be interacted with at all and even with Labview. LabVIEW would remain on the same screen sometime after he arrived at the "finishing initialization."  I still have no idea why they froze like that just because I entered a server name in the License Manager, but it's ok now.

  Thanks for your great help!

• How can I run the License Manager?

  Hi - I had LV 8.5 installed for a while now and I just built an exe file, so I need to activate the application builder. I have a license key but I do not see how to run the License Manager.

  According to the instructions in the box, it should be at the start > programs > National Instruments > NI License Manager

  But he's not here. Does Nayone know where on C: I can actually find the exe I need to run?

  It is a Windows XP machine.

  Thank you

  Jon.

  Here, "C:\Programme\National Instruments\shared\License Manager\Bin\nilmUtil.exe" it is on a German system.

• What could change the ID of the computer used for licenses in the License Manager OR?

  the site of our client we initially implemented our software that uses the Vision Run-Time and Acquisition of Vision software.    We bought a license for the PC and it has been installed. He has headed since July.   But today the customer started getting errors requesting the license. using the License Manager, OR we see "status: activated for another computer.

  look no further, we now see a different ID 'computer' code I have original screenshots when I applied the license originally so I know that the ID of the computer was not a typing error.

  The customer says person only has swapped the PC, but is currently looking to see if any work has been done.

  Someone at - it expirenced this before?

  Quote: Your computer ID is based on the MAC address of your Ethernet card. In some cases, your computer ID is based on the disk volume serial number.

  Well, my computer has literally just sat there week and this morning it me that LabVIEW was not enabled.  I do not think that the MAC address or the disc has changed in that time.  But who knows.  Our IT is pretty bad.

• SignalExpress Tektronix License Manager

  I'm still the site administrator for LabVIEW SignalExpress Tektronix Edition licenses (used by the Tektronix sales force to sell SignalExpress TE) and I still have the same computer, but it's switching me from XP to Win7. The same License Manager software will still work, or I'm going to need an upgrade? A new license for the License Manager?

  Hello scottdavidson,

  If your computer ID does not change, then you should be good on the terms of your license file.

  Kind regards

• Batch command for license management

  Is there a possibility to have a batch command to get information of license? We need for automatic control of accounting and the license. With the normal FlexLM, it is possible to get them to 'lmutil lmstat f', but lmutil does not work in the environment OR :-(. The generation of a text file as the export of 'computer & user' in the OR License Manager would be sufficient.

  Axel

  Hi Bernd,

  It was the lmutil version, I tried it today with the 11.7 version and it works

  Axel