Fireworks for wireframing - how to remove a layer of a page?

Similar Questions

• How to remove links on the same page?

  I have PDF documents with links to referenced sections (for example the text link "Article 2.2" points to the real page number of "article 2.2" "), but as the links are created from the cross references in the interpretation of the word to PDF, there are cases that the destination page number and the number of the page source of the links are identical (for example, text links"section 2.2 "on page 9 are created with the destination on page 9, which is the actual page the number of"Article 2.2"), I want to delete all these links, but I don't know how to get the landing page, I check the QAnywhere and finds that"PDLinkAnnotGetAction"may work, but I don't know how to use it, you could me check codes below and advise? Your help is really appreciated!

  PDPage page;

  ASInt32 i, of i2.

  AVDoc avDoc = AVAppGetActiveDoc();

  PDDoc pdDoc = AVDocGetPDDoc (avDoc);

  int pageNum = PDDocGetNumPages (pdDoc);

  for (i = pageNum - 1; i > = 0; i--)

  {

  page = PDDocAcquirePage (pdDoc, i);

  int annotNum = PDPageGetNumAnnots (page);

  for (i2 = annotNum - 1; i2 > = 0; i2-)

  {

  If...

  PDPageRemoveAnnot (i, i2);

  }

  }

  My product information:
  Acrobat Pro 8.1.6, Windows

  Start by reading the PDF standard (ISO 32000 - 1) to understand the Actions vs Destinations.

  Then for each annot, you'll want to see that she (and in the case of an Action, if it has more than one).  Next, you need to analyze the action or dest to see what it is and where it goes.  If you do not, you will delete it.

  From: Adobe Forums [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Tuesday, October 25, 2011 09:25:32-0700

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Topic: How to remove links to the same page?

  How to remove links on the same page?

  created byhttp://forums.adobe.com/people/OALDOALD > in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/3989576#3989576

• How to remove (delete) the last blank page of the script?

  Is anyone of you know how to remove (delete) the last white page that appears in the script? My story is 126 pages long, but in the scenario (the document) 127 pages appear because the last is a blank page, how to erase this page? Thank you.

  You can try the following:

  -by pressing the delete key at the end of the text to page 126

  -Check if you have the ability to 'Unlock the Pages' in the Menu 'Production '.

  If you still face this problem, can you please save the document to disk (file > save to disk) and send us an email to DL-AdobeStory-supportadobecom, so that we can offer you a fix?

• How to remove audio from the Web page

  Here is my site: lenovermeats.com

  I want to remove the audio playing, how?

  using CS3

  Remove the bottom of the page in Code view of the following...

  images/front.mp3"type ="audio/mpeg">".

  images/front.ogg"type ="audio/ogg">".

  Looks like you are using at least some php on the site, so it is also a small php include on this page as.

• How to remove movies from the summary page

  With the help of iTunes version 12.4.  Can anyone help in my attempts to remove movies at home summary page in iTunes?  I was able to remove movies from my iPhone and iPad and unchecked on the summary in the movies tab page.  However, films controlled and deleted still appear in the section summary of movies.  Cannot find a delete any action to remove unwanted movies.  This has to do with the deletion in iTunes itself on a Windows version 10.

  Steve

  FOUND THE ANSWER!  From a previous post-, I had the same problem. You cannot remove them from the summary page. Cannot you.

  In the app iTunes on Mac or PC, without your phone, from the drop-down menu at the top left - select movies and then click on, select, Home Videos. In the next screen, select the home theater and right click. This will allow you to remove. Once you reconnect your phone and sync, the cinema will be gone from your Summary Page!

  Steve

• How to remove each layer except the selected layer?

  Hello

  I would like to delete all layers including the background sets and layer except for the selected layer.

  It seems easy to first, but it stops... I tried in several ways; What I am doing wrong?

  #target photoshop
  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  app.bringToFront();
  var doc = app.activeDocument;
  var currentLayer = doc.activeLayer; // remember the selected layer
  var selectedlayername = currentLayer.name;
  currentLayer.move( activeDocument, ElementPlacement.PLACEATBEGINNING );  
  
    function DeleteLayer(layername) {  var desc1 = new ActionDescriptor();
      var ref1 = new ActionReference();   ref1.putName(cTID('Lyr '), layername);
      desc1.putReference(cTID('null'), ref1);     var list1 = new ActionList();
      list1.putInteger(17);  desc1.putList(cTID('LyrI'), list1);  executeAction(cTID('Dlt '), desc1, DialogModes.NO);
    };
  
  function DeleteBackground() { var desc1 = new ActionDescriptor();  var ref1 = new ActionReference();   ref1.putProperty(cTID('Lyr '), cTID('Bckg')); desc1.putReference(cTID('null'), ref1);     var list1 = new ActionList();     list1.putInteger(1);   desc1.putList(cTID('LyrI'), list1);    executeAction(cTID('Dlt '), desc1, DialogModes.NO); };
  
  function initial () {
  for(var i = 0 ; i < doc.layers.length;i++){    if (doc.layers[i].isBackgroundLayer == true ) {  DeleteBackground();} }
  var layerNum = doc.layers.length;
  for(var  s = 1 ; s <= layerNum;s++){
     if ( doc.layers[s].name != selectedlayername ) {   
         DeleteLayer (doc.layers[s].name);
         }
     else if ( doc.layers[s].name == selectedlayername ) {
         }
     }
  }
  
  initial();
  

  Thank you

  Best regards.

  Hi arteangelus,

  Try this Code...

  #target photoshop
  var docRef = app.activeDocument;
  var layName = docRef.activeLayer.name
  var l = Number(docRef.layers.length)+1;
  while(--l){
      if(docRef.layers[l-1].name!=layName && docRef.layers[l-1].name!="Background"){
          docRef.layers[l-1].remove();
      }
  else{continue;}
  }
  

  -yajiv

• How to remove the layer by name?

  Hello

  I currently have a script that removes the unused/white/empty layers:

  var layers = app.activeDocument.layers.everyItem () .getElements ();

  for (var i = layers.length - 1; i > = 0; i--) {}

  {if(Layers[i].pageItems.Length==0)}

  layers [i]. Remove();

  }

  }

  but in addition to the unused layers, I need to remove layers which have a layer name that begins with a support "[]". Often, there are layers of model in our workflow which are not necessary - they are named differently but always begin with a hook. Example: [page 2] xxx - xxx-#.

  I tried frankensteining in a piece of code that Jarek provided for another script that processes the names of swatch, but I'm afraid, I'm rather desperate (I intend to become less desperate... then maybe you will not always be overcome with dread seeing my messages... but it does not solve my (or your) problem now).

  As always, I appreciate your consideration and help.

  After the first appearance of the line

  layers [i]. Remove();

  try adding the line

  continue;

  Here, the reason may be that if a layer is empty, then it is removed, and

  so it's no good trying to access his name since there is no

  more. A command continue will force the loop to move on to the next

  iteration instead of a wrong to move on to the next if statement.

  Ariel

• How to remove a layer without transparency?

  I want to disappear a layer (equivalent to about 40% opacity) unless it becomes transparent because I have another layer under what I won't show through it.  I'm trying to tame the image without transparency.  It seems it should be easy, but I can't understand it.  Any help is appreciated.  Thank you.

  1. duplicate the layer opacity change needed.

  2. block transparency, select all, fill it with white. Set the opacity to 100.

  3. pass the double layer that you did in step 1 and change opacity.

  White blocks the underlying layers to show through. I think that something like what was suggested to post 4.

  The idea of above-mentioned levels or curves should work too:

  1. new adjustment with a clipping mask layer

  2. move the black point to white

  3 change the opacity of the adjustment layer. The opacity of target = reverse. So if you want opacity 40 put the layer opacity setting of 60.

  Please note that these procedures will not necessarily produce the same result. Similar, but can be slightly different depending on the transparency of the target layer mask.

• How to remove 'bing' as my home page. I tried the usual.

  I have validated my homepage address. Control Panel > internet options > home page. I deleted 'bing' every drop possible down, BUT when I connect 'bing' comes as my home page. I searched "bing" in all files, programs and if I could ID I deleted. Strange... its as if he is in front of my home page. Any ideas? TKS

  Options Internet is for IE, Firefox preferences are defined in Firefox.

  http://support.Mozilla.com/en-us/KB/how+to+set+the+home+page

• How to remove blackBerry smartphones saved browser page?

  While the search for a web page, I think due to the lack of signal, I could not access the required and clicked page to save the Page when the option is available.  I want more that to be saved.  My main screen now shows an icon browser at the top where normally see you text or Email reminders... How can I get rid of this?

  Open your messages folder > Menu > view folders > push browser (or WAP Push) and find the open message or delete it.

• How to remove logout navigation within a page

  Hello world
  In my application, I have change password page (page 12), when the user given the details and clicked the update button,.
  then they will be redirected to page 13, he gave the message,
  "your password has been upgrade, login click here"
  but in all the right-top corner of pages, he has navigation like:

  welcome: "username"  logout

  The above appears in all pages (1,2,3,4,5... 13)
  Here, I need to delete logout navigation on this page (13) only.
  where should I remove them?
  Thank you.
  Kind regards
  gurujothi

  Hello

  what you need to do is to copy the page template that you use on page 13 to something like _nologout, so that the name clearly indicates what it does.

  Next step is to choose this model (edit page 13), this can be done under--> "page template" display attributes
  Select your model of freshly copied page here and click on apply.

  In the right panel of the preview page in the parts of shared components, you will see your custom template has changed (open the models node to see this).

  Double click on your custom page template for editing.
  Remove the entry from #NAVIGATION_BAR #, logout will disappear.

  
    
  #LOGO##REGION_POSITION_06#
    #REGION_POSITION_07#
    
  
      
  #WELCOME_USER#
      #NAVIGATION_BAR#
      #REGION_POSITION_08#    <-------------------------------------remove this
    
  
  
    
  
      
  
        
  
        
      
    
  
  #REGION_POSITION_01##REGION_POSITION_04#
  #SUCCESS_MESSAGE##NOTIFICATION_MESSAGE##GLOBAL_NOTIFICATION#
  
    
  
      
  
        
  
          
  #REGION_POSITION_02##BOX_BODY#
          
  #REGION_POSITION_03#
        
      
    
  
  

  Robin

• How to remove a master to a page

  Hello

  I inherited a document at the end and I am new and was struggling. I need to add a graphic to a page in this document, but cannot add a rectangle structure. I created a regular framework, but when I place my image, I can still see the master page under my picture which I believe has a white background. Help, please!

  

  Thanks for the help. Just added box with white background at the top of the master page.

• How to use a layer to multiple pages?

  I used Photoshop to create a series of web pages. I currently have about 20 such pages.

  Unfortunately, I need to change the navigation menu located on 20 pages.

  To make these changes, that I need to change 20 different files? Or y at - it gives a way to bind a group of layers for several PSD files that change on 20 pages edit once?

  Thank you
  C

  You will have to make some kind of change to each document, but it should only take a few minutes when there are only 20 of them. You change the group in one, then for each other, simply duplicate or drag the edited in Group and delete the old group.

  There is also the possibility to structure your workflow with smart objects, which may be updated at each document of a joint paper containing only the menu group. For a content of the dynamic object link, there's a third party plugin but I don't know if it's reliable.

• ONCE YOU ARE LOOKING FOR SOMETHING HOW DO YOU RETURN TO THE HOME PAGE WITHOUT LEAVING

  I DO NOT SEE THE BACK ARROWS

  You can open a new tab to return the subject: newtab page with thumbnails of visited web pages.
  
  If you have set the homepage to this: newtab page then you can click on the home button on the side of the right end of the Navigation bar.
  
  You do not get a return enabled button to return the subject: newtab page if other pages are open from this page.

• How can I remove a layer?

  How to remove a layer in contact with Adobe. Great app, enjoying the new features

  Select the layer that you want to delete, tap the small layer at the bottom of the column and then click the delete layer button