Firmware for Pioneer DVRKD08A DVD writter - Satellite P300-133

Similar Questions

• Re: Satellite A100-955: I need a firmware for Mat * a DVD - RAM UJ - 841S

  Hello!

  I have a Satellite A100-955, and I need a firmware for my CD/DVD drive.
  It works fine and bad in different times.
  My current version is 1.60. I can't find an update anywhere! Or at least the same firmware...

  I can't find it on CPR1, I can't find it on the Web from Panasonic website. Help!

  Hello

  I checked the Toshiba page and there is no updated firmware for this CURIOUS.
  Usually if you have some problems with reading or writing to the disks, then this means that the STRANGE beginning of malfunctions and no update firmware could help.
  Perhaps the drive's laser lens is not ok this happens after a long period of use.

  Maybe you can try to clean the lens with the help of alcohol and lint.

  If that does not help, then you should try different discs from different manufacturers
  And the last option could be replacement drive.

• Firmware for Toshiba ODD-DVD SD - R5272

  Dear support,

  I have a Toshiba ODD-DVD SD - R5272 installed in my computer. This drive can write according to technical specification, DVD - R, but my drive, can not because my firmware is outdated. Even after several searches online and on tohsiba-Support pages, I haven´t find any firmware for my ODD-DVD.

  I hope you can give me the latest firmware and software for assigned Flash, SD-R5272, for Windows 7 (64 bit) operating system.

  Thanks in advance.

  Hi SDR5272,

  > Dear support,
  Just for your information: It's just a forum user to user here and no official support from Toshiba. If you can talk with normal people like you and me, and I doubt that someone could give you an update for this drive.

  > can write, but my DVD-R disc can not because my firmware is outdated
  The firmware has nothing to do with it. If the drive specification says that you can burn DVD-R media, you can do. With a new firmware, you can upgrade your player and add new features. It s bug just setting but not more.

  My personal opinion is that the problem is related to the brand of DVD - R. Have you tested different brands? I would recommend medium high quality Verbatim or TDK for example. They are really good and never had a problem with them. :)

• Need driver 64 bit Vista Conexant for Satellite P300-133

  Hello

  I have a Satellite P300-133 with 64 bit Vista and I'm looking for a driver cx20561.
  I found that a pilot of the other manufacturer which was perfect, except the microphone does not work.

  Toshiba is a 64-bit driver?
  What can I do?

  try this one
  http://Support1.toshiba-tro.de/Tedd-files2/0/sound-en-20081002135913.zip

• Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free

  Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.

  I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
  I have three options.
  1. install a new drive.
  2 use an external hard drive
  Firmware 3.

  The latest is the one I prefer.
  Can someone help me.

  Hello

  Sorry, but the firmware update will not remove the DVD region lock.
  The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
  Unfortunately, there is nothing to see!

  If you wish, you can consult this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828

• I would like to know where I can get the right firmware for my CD/DVD burner

  I WOULD LIKE TO KNOW WHERE TO FIND THE GOOD FIRMWARE FOR MY CD/DVD BURNER

  I WOULD LIKE TO KNOW WHERE TO FIND THE GOOD FIRMWARE FOR MY CD/DVD BURNER

  Hello

  You will need to contact support for the manufacturer of the device or the computer manufacturer if the device was preinstalled on the computer.

  Concerning

• Make sure you have the latest firmware for cd or dvd burner

  I can't burn videos on my cd or dvd burner. He say make sure you have the latest firmware for cd or dvd burner. What can I do?

  This forum is for Microsoft Security Essentials.

  Go to the website of the manufacturer of CD/DVD and get the firmware.

• The water went in the Satellite P300-133

  Nice day!

  I have a problem because my neighbors in upper flat. They got their apartment flooded because of heating does not, and water entered my laptop Toshiba Satellite P300 133 ruin.

  I went to the authorized service center, they diagnosted motherboard full failure and now want to totally replace and want to charge me 400 usd for motherboard, 130 for labour and 110 for the possible change of keyboard.

  The questions are:

  -a complete failure of the motherboard under this scenario is realistic?
  -is it possible to get cheaper motherboard (maybe used) you?
  There's something that can be changed under standard warranty? (it's still about it)

  Kind regards
  Tigran

  Hi Tigran,

  Oh, really not good news of s but I think that this could happen from time to time...

  > complete failure of the motherboard under this scenario is realistic?
  That s very realistic! Friend of me has had the same problem and the authorized service provider also exchanged the motherboard together because it of not possible to Exchange only a few unique pieces on a motherboard.

  > is it possible to get cheaper motherboard (maybe used) you?
  What you mean? Here you can talk only with normal users and I don t see anyone Toshiba directly here.
  The only option is to order a motherboard of second hand on eBay

  > is there something that can be changed under standard warranty? (it's still about it)
  I doubt that
  I mean that s your own faulty and is not a problem of Toshiba. I know that of difficult to hear, but this fact s.

  Finally and most importantly, I think that the prices are ok, because the motherboard is a very expensive part and it also takes a long time to exchange it. This can done in a few minutes, so t he s a bit more expensive.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Satellite P300 - 133 WiFi card - upgrade to N

  Hello
  My laptop Satellite P300-133 was delivered with a WiFi Intel PRO/Wireless 3945ABG card.
  It has facilitated access to the PC card.

  I have acquired a new worthy of the N standard wireless router.
  It works very well with existing under the standard G laptop card.
  New Satellite P300 models are standard h.

  I would like to know if there is a map for the Satellite P300-133 that I can use to replace the original card for laptop with a corresponding also to the N standard.

  Thank you

  Hello

  It is has some network cards wireless standard 802.11 Draft N but also as far as I know the project WLan N needs 3-wire antenna.

  The other WLan standards such as 802.11 A, B or G need 2 antenna son and I imagine that the laptop has been delivered with 2 wired antenna and therefore the Draft N will not work in your notebook.

  However, you can try some external wireless network cards that would favour the Draft N

  Welcome them

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Satellite P300-133 - Hotkey utility for Windows 7

  Hello.

  Sorry for my bad English.
  I have a problem with my laptop Satellite 300-133

  I installed Windows 7. Then installed the driver that I found. I have not found on utility Hotkey for Windows 7 and I need to install the driver for Windows XP compatibility mode. But here's appers a bug. When Windows 7 just starting, but a few moment later CONDUIT (sernor on top panel) and indicators on the bottom of specifications beginning light like crazy.

  I think it's driver problems. I cann't find driver for Windows 7 :(

  What should I do?

  Best regards, Sergei.

  Hi wer32,

  For Windows 7 there is no Hotkey Utility as on Windows 7. All the Toshiba built-in tools in Toshiba Value added Package which should be available for your P300:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  So in your case, you must remove the Toshiba for XP utilities. Then install the package of added value on the Toshiba site.

  Check this box!

• I need the firmware for a chicony cam on Satellite A300-14 s

  I had a lot of problems with my chicony cam on A300 Dungeon of freezing and to stop working so I think that update the firmware, so I search on the net for new firmware and I found one and install it... now my cam isn't working windows can see and it gives the device works but when I try to open Toshiba help cam its says the cam does not work and when I try to open it in PROG like yahoo, nothing happens.
  It s not even power up... so please I need the firmware original please please please...

  Sorry for my bad English :)

  Firmware for cam doesn t exist. What you can do is to install the driver for the webcam.
  What operating system you are using and what firmware you have installed finally?

• XP installs - ntdlr.dll missing on the Satellite P300-133

  We bought the satellite P300 with preinstalled Vista. It worked fine except for some major programs for hardware configuration in our society.

  So, we tried to install XP Professional on the primary partition that has been formatted before that. The blue screen where XP installs its files (after you have created the partition and formatting it) on the end to 99%, it says 'missing ntdlr.dll '.

  We first tought it has something to do with the SATA compatibility mode which we configured in the BIOS to cause driver AHCI missing on the XP CD. Then, we did a backup CD with nLite with the SATA drivers installed and run the AHCI mode.

  The same problem at the same point. I DIND'T try with another copy of XP but I know that it (a month old scratch free original CD) works very well because I installed it on another laptop front.

  The only thing that is strange od these partitions are mixed to the top. The partition where Vista was before is now D, it is also the reader where we tried to install XP, C is not the car with all the previous system backups and F it seams to be the Vista installation files.

  Please any suggestions, its very urgent
  We need this computer next week.

  Hello Peter

  Fun to read and I thank you for the reply.

  If you have any problems, post.

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?