Satellite P300-133 - how to use the internet connection via BlueTooth

Similar Questions

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• How to use the default connection type?

  Hi all

  Someone knows how can I make my app use the internet connection which has been set for the browser?

  For example, if the browser has been configured to use the WiFi, use it instead of GPRS, EDGE or 3 G. Otherwise, if WiFi is not available, it allows the best data connection?

  According to BlackBerry, there are 5 connections to choose.

  I found good article solved my problem

  http://blog.accelgolf.com/2009/05/22/BlackBerry-cross-carrier-and-cross-network-HTTP-connection

  I used the code in this article and the work demands right now

  Thanks a lot for all

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• How automatically dial the internet connection in the browser firefox to start the browser in internet Explorer

  I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps

  Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
  create this connection, I must provide the user name and password provided by the ISP.

  I have to dial internet connection manually after the modem set automatically connect to the local network
  I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
  is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?

  and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.

  The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:

  Windows Control Panel > Internet Options > connections or
  
  Internet Explorer Tools menu > Internet Options > connections

  "Dial whenever a network connection is not present"

  Source: How to make Firefox automatically dial up

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to activate the Internet connection on the network and sharing Center.

  

  I clicked on disable when I opened it. I tried to find a solution to this, but I can't find anywhere on the web. Please, help me difficulty find my internet connection. I'd really appreciate it. It's windows 7.

  OT: I accidentally disabled the internet connection by going to network and sharing Center

  Thank you.

  Hello
  I suggest you to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also the link: wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results after trying the steps above.

• Laptop &: how to share internet connection via Bluetooth?

  Hello

  I recently bought a laptop and I can't find how to share internet via bluetooth from my desktop pc. I can connect using the personal area network (PAN), but I don't know how to send the internet. everything that I said try as much as all have failed.

  I do not know this questions been asked a lot, then I'm sorry to ask again)
  could someone tell me step by step installation?

  (Thank you, it is appreciated)

  Hello

  It s takes longer to describe the complete installation of the use of BT for internet sharing.
  I found this site with a statement of installation for Windows 2000.
  The dialog boxes for Windows XP may be a little different, but the configuration will be the same.

  http://www.Geekzone.co.nz/content.asp?contentid=1285
  However, check it out. It s useful.

• Satellite - WIi 8 - How to use the SD card

  Windows 8 on Toshiba Satellite.
  I do not know how to connect my sd card

  I pop my card to build in reader and now what?
  Nothing happened and I don't know where to find the answer.

  Perhaps you could provide some i.e more details:
  What model of laptop do you have exactly?
  Have you changed anything in the configuration of the system?
  Do you use the Windows system preinstalled by Toshiba?

  Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

• Satellite P300 - 271 - how to replace the keyboard?

  Hello
  I have a Satellite P300 - 271 and there are a few damaged keys. I bought a new keyboard for this laptop.

  Is there a caraa how do I replace the keyboard?

  Greets, Benjamin

  Hi Benjamin,

  As far as I know that these manuals are not for the public. Technicians certified for laptop only can download these manuals. You can download the normal user manual that came with your laptop.

  A friend told me to replace the keyboard to remove the keyboard first, support but it s fixed by screws on the underside. After that, you can remove the keyboard but be careful with the cable.

  Disassembly of the laptop is a little tricky. If you n t have experience with that you should ask a technician for laptop help.

• Satellite L450-12W - how to use the folder HDDrecovery?

  Hello

  I need to get this L450, but its owner did not get it back dvd.

  The system does not start, and he said:
  + BOOTMGR is missing.
  Press ctrl + alt + delete to restart +.

  I noticed the hard drive of 320 is divided into three partitions:
  first of all, hidden, SYSTEM, 400MiB, with the diag + flag +, and there's the Startup Manager (+ bootmgr, BOOTSECT. BAK+ and the folder + start +) and a folder called recovery + where there is a subfolder called + WindowsRE + which contains + winRE.wim +.
  second is WINDOWS, 149GiB, with the flag + start +; This is the operating system.
  in third place is given, 148GiB, no flag. Here's a folder called HDDRecovery size 6.4GiB and a folder called + MONICA-TOSH + where there are a lot of backups that I don't know how to use.

  Then, I tried to follow the manual, which know to press the 0 (zero) key when starting to start the recovery from the hard disk, but it did not work, no screen appears and the error message appears again.

  What should I do?

  Thanks, and sorry for my English, I'm Italian.

  EDIT: I forgot to say that I also tried to fix the problem with the Windows7 DVD repair tools, but he did not find any operating system with a Linux Live, I see that all the system files are in the WINDOWS partition!

  Hey Buddy,

  The HDDrecovery usable only if you are able to access the Windows Advanced Boot menu. There is an option called fix my computer which will start the Toshiba HDDrecovery.
  I put t know what the user manual you have, but AFAIK press zero will not work. You must press the F8 key to access the advanced boot menu.
  It work?

  If not, there is nothing you can do I think wait Toshiba Recovery disk Windows reinstallation. This will restore the preinstalled settings of Toshiba. If you n t have this disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Alternative you can use a Microsoft Windows disk to reinstall Windows. After that, you have all the drivers and tools from Toshiba Web site.

• Satellite P300 - poor sound quality using the Dynadock

  I have a laptop Satellite P300, Vista and a * Dynadock VBI * port replicator.
  Except for the audio part of the dynadock works very well.
  I can edit on 2 screens.

  However, the sound is horrible. You can hear only fragments distorted healthy eating and a white noise.
  It takes the dynadock software, because the sound on the laptop is OK and if I connect speakers (Logitech) directly to the laptop, there is no distortion.

  I already downloaded the latest drivers from Toshiba, removed the old software and reinstalled with the new drivers.
  Technical support from Toshiba didn't have an answer.

  One of do you?

  Cordially Frac

  Perhaps there is a ground loop?

  If you remove the power supply of the laptop so its just running on battery, still doing?

• Satellite L300-215 - how to use the Draft N Wlan

  Hi guys...

  I have a toshiba Satellite L300-215, who has a card Intel wifi link 5100 AGN.
  I am connected to my wireless router BELKIN N1 at a speed of only 54 Mbps...

  Is someone can please tell me what I have on my wireless card to fix uses n parameters Project installation of my laptop?...

  your

  Hello

  Your router must support the project in order to connect to the laptop using Draft N.
  In your Wlan Draft N router settings must be enabled.

  In-WLan card-> properties > Device Manager, you can find the Advanced tab.
  You will find many different parameters. Here, you have to choose 802.11 N (Draft N).

  Generally if the two option would YOU then you might be able to use the Draft N

• Satellite L350D-213 - how to use the WLAN?

  My mother & father has bought a laptop last week and are having problems with the connection to the sky broadband. Sky Broadband is a netgear router, which has wireless capability.

  My question is how does broadband on your laptop? They need to get a wireless dongle to use, my experience with laptops is minimal.

  Any help much appreciated.

  Hey Buddy,

  I think you should read the user manual. There you can find all the necessary information using the laptop.

  To use the WLAN functionality, you must enable this feature using the WLAN hardware switch on the laptop and the FN + F8 key combination. Check it!

  If the WIFI is enabled, check the configuration of TCP/IP. It s according to your router if you use DHCP or a static IP address.
  In addition you must disable management feature in the management of WLAN power supply.

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.