firmware K3 note update

Similar Questions

• PERC 5 firmware will NOT update on a 2950

  There's a thread about it here, support-forums/servers/f/906/t/19469416, but the response contains incorrect information and no way to add to this thread.

  The display flash that firmware is to support/drivers/us/en/04/DriverDetails/product/poweredge-2950? driverId = 2RPK0 & osCode = WS8R2 & 2974571956 = starts, but this is incorrect.

  The page is there, but the firmware link is facing a 500 error page.

  The firmware on this page is different from what is listed on downloads.dell.com/published/pages/poweredge-2950.html#Drivers

  The problem I have is that after updating the bios, etc. of ger/bmc, I try to run the firmware update, it makes the inspection and reports an old version and asks me if I want to upgrade to 5.2.2.0072

  I comply, and then a split second later he says:'s done it and does not require a reboot, (that I know, it should be) Eeven after reboot it is still on the old 5.0.2 - 0003 version

  The OS is a new installation of 200 R2 X 64 with all updates.

  Exe that I use is the page I mentioned to the support/home/us/en/19/drivers/driversdetails? productCode = poweredge 2950 & driverId = WJG5R

  SAS - RAID_Firmware_WJG5R_WN32_5.2.2 - 0072_A08.exe

  I have updated the PERC firmware for many years and have never seen this behavior so it has me a little confused.

  I rebooted and tried it several times and it's always the same result.

  I him I had finally worked. I had to run an older version of the same file [deleted profanity].

  The version of the 09/05/12 marked (A08) doesn't seem to work on a completely updated 2008R2 updated x 64 or completely updated 2003 ENT x 86.

  BUT the dated version Date 07/10/08 marked (A09) worked.

  TWO of those exe is marked 5.0.0 - 0072 and the only difference I see is that the exe file is named differently with different release dates.

  Imagine me being so stupid to think that the most recent version of the exe would be the only one using.

  I missed the difference before and the question why the "most recent" has an A08 tag and the 'old' has a tag A9.

  I don't know if engineers could never recreate what I've lived, but maybe my situation will help others in the future since my guess is in the next few months, many will migrate their systems to move the remaining systems from 2003 to 2008 and 2012.

• M4345 will not update the firmware

  One of my clients has 5 M4345 mfp.  The most recent, built around 2010, will accept the 48.306.1 firmware update.  The older models (which have parallel ports, not the USB ports) are at the level of the firmware 20050607 09.022.3 and will not accept the upgrade.  Using the lpt1 port, I managed FTP'd and copied the file from the rfu.  The ACM indicates it is the upgrade, then restarts, but the firmware is not updated.  I also tried the Utility.exe through the lpt1 port.  Yet once the ACM indicates it is the upgrade and that it recharges, but firmware is the same.

  Bottom line, I'm trying to get rid of the question of OpenSSL.  Any help will be appreciated.

  There are two different models of the 4345. The first was just a plain 4345 and the second was the M4345. The firmware is different between the 2 models. The link below is the firmware for the old model.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=415209&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dds_73628_15%257CswEnvOID%253D54%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Satellite A210 - update the Firmware is not compatible

  I just tried to run this update sent through Tempo and I get an error message saying that the update of the firmware is not compatible with the selected drive. Contact the manufacturer for more information about the updates of the firmware.

  What I am doing wrong?

  My laptop model is A210 phone.
  Here is the information of update on my alert tempo.

  FTP - URL frmwre - 20080422163939.zip

  Date last modified 30/06/08
  Subtype TS-L632
  Version TO02

  Are 100% sure that your Satellite A210 was equipped with the TS-L632 drive?

  To my knowledge, the error message as mentioned in your ad appears only if the firmware is not compatible with the CD/DVD drive!

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• 32DV504B - TV Firmware does not load/display on TV

  Hi all

  I downloaded the latest update of firmware for my TV (x 2) - 32DV504B. I copied the file downloaded on a USB and connected to the TV. I can't get the file loaded at all.

  I tried many readers USB, many formats (FAT, FAT32, etc.) - exe on it's own, excerpts, but no matter what I can not do the upgrade, I tried to boot from the USB port, I've tried the settings, look for the upgrade - white bar just stays at zero by telling the search.

  any help would be appreciated.

  Concerning

  Barry

  Emmm... I wonder where to find the firmware for this model of TV... I checked the Toshiba Download Center and this TV is not listed...

  I guess the firmware update cannot be performed because the firmware is not compatible...

• Anyone having problems with the BT Home Hub 5 since the firmware has been updated two weeks ago?

  Since the firmware has been updated a couple of weeks, my air 2 canned disconnection from the wifi ipad. And if she's not be disconnected it asks the router to renew the lease every few minutes. Sometimes I can't the internet connection, other times I have connection, but used to play embedded videos.  I have to turn the ipad works to recover.

  In addition, my ipad think that the ip address is 127, but my router it's 115!

  I tried BT, but British users will know it is terrible, they are.

  Anyone with problems and suggestions? I tried everything until and including resetting the network settings. I'm sure it's the router.

  Hello

  If you can afford to buy your own router this will work much better

  I use a Netgear without problems 6300rv & double speed

  Works even at the top of the long garden.

  If you are not bound to bt try Plusnet based in Sheffield

  Very good at solving problems.

  See you soon

  Brian

• The first graphing calculator HP will not update. Stuck at x 2 + y2 = 1

  I tried to update my brand-new first HP Calculator graphic using a version update of the HP connectivity Kit.  The update failed and the calculator will reset but not exceed x 2 + y2 = 1.  I tried to use the following manual method of a post on Educalc and the usbtool will not load the update.  ANY HELP, PLEASE!

  Of HP first Firmware update manual

  1 download the firmware files and unzip into a folder

  2 wipe Calculator (optional)
  a grip on the keys of F, C and O while resetting calculator
  b to the menu, press 4.3, then enter
  c when the format is complete, go to step 3

  3 given to zero Calculator (back button) while holding the button "Symb".
  (poster or screen update tool ARM or recovery mode)

  4. connect the computer using the USB cable
  (wait of recognize the device USB)

  5 run usbtool.exe

  6 select the check box 'Auto update '.

  7. click on the button "Update".
  (blue bars will show that the unit is updated)

  8 calculator reset

  Note: If a step fails, please proceed to step 3

  Please, do not update your HP Premium using Parallels on a Mac Desktom.  I tried and the drivers of USB Port would not allow the update completed successfully using HP Connect, the Update.exe program or the application of usbtool.exe.  I managed with the help of an old laptop on XP using the USBTool.exe application using a native PC environment.

  I will say that I am running OS X 10.10 Mavricks Beta 2 on my MAC, but I don't think it's a problem, although I will know Parallels.

  If you use a MAC, borrow a PC (ugggh) to update your first HP.

  NOTE: the usb tool is displayed as part of the ROM for HP Premium updates on educalc.com at: http://www.educalc.net/2336439.page

  David

• I don't get my firmware or software updates. I see that someone has registered my computer as a workgroup computer and I have no right administrative no matter what I do

  No update software, no firmware updates...
  All parameters must be set up whenever I connect... Security etc...
  There Samss and about 15 svchost.exe, WUDFHost?, Netman, homegroup x 2, amd Blutooth?

  I reconfigured Vista 3 times and installed a clean copy of 7, but it must be in the BIOS or illegal product? The two return to the initial setting. (even after I reconfigure my hard drive). (I can modify manually on each file and even in the Panel administrator rights, but each change back!) I believe that when I shut my computer down start installation has been reconfigured with a backdoor.exe.  How can I get this person from my computer! I tried all the spyware, malware, etc... but it does not detect the "domain servers with functions of remote logon" and spies. Also, I used my personal card broadband since the date of purchase, but I don't really use this card that my supplier tells me. I'm tunnelling through their server. (Still a thing... they live 20 feet away!) Help!

  Wheretostart,
  I'm a little confused about what exactly it is you are having problems with and are trying to accomplish.  However I will try to answer the items you listed.

  1.) your BIOS update is something you need to do by using the machine to motherboard\PC.  They will provide the update to the BIOS and would be able to provide assistance to that.

  (2.) what software you are trying to update?  If you try to update 3rd party programs, then you will need to check with the software manufacturer for updates to the software.  If you want to update Windows, and then run the Windows Update program that is located in the section of all programs from the Start Menu.

  (3.) where you see these processes and how are you trying to start?  Also copied the names of them exactly?  I'm unable to find information about most of them.

  4.) it's always good to be protected but having more than one installed virus\malware can cause problems.  You must make sure that only your program main virus has anything from when Windows starts.  Also I would recommend do not use Registry monitoring programs.  Sometimes they can do more harm than good.

  5.) If you did a clean install of (I assume) Windows 7 and have not installed all the programs, then you must run the System File Checker to verify the integrity of the operating system.  If you have already installed other programs then I suggest running a clean boot and check the results.

  6.) don't know what you're trying to accomplish here.  BIOS will not help you to partition your drive.

  Finally, if you're just trying to get your system up and running without virus here, is what I would do if it was my computer:
  Disconnect from the internet.
  Factory restore; Download the system to the status of day a "out of the box.
  You may need to connect to internet to register Windows, but then I would unplug again.
  If at this point you have an upgrade to Windows, I would then install.  And I would use custom installation so that it does not update the files in Vista but in fact move in Windows.old and install everything from scratch.
  Once Windows 7 is installed, I connect to the internet.  Windows registry, run Windows Update, until there are no updates available. Then, install an antivirus program and make sure it is up-to-date.  You can then install programs and update drivers\software.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sansa fuze will not update track licenses

  I must have the most ghetto sansa fuze there because I had so many problems with mine. I currently have two. I have the new firmware from sandisk sansa updater program.

  First of all:

  When I connect my sansa fuze to my PC to update track licenses, add songs, etc. that my computer slows down considerably and all internet access is stopped. I can't sign my account on rhapsody because the internet will not work. And since internet does not work when it is connected, I could not update my licenses and now they are all expired. Help, please!

  Second:

  I took the same sansa fuse to another computer. When I plugged on the second computer, I had no problem. However, when I try to update the licenses, the Rhapsody program says that the function is finished. But when I try to listen to music in the "rocket", the "rocket" tells me that track licenses are obsolete. I've updated the entire library and internal and external disks, appears in the pane. I hope this makes some sense. Any help is appreciated.

  It's the limitation of the Janus DRM.  You must update the licenses of track on the same PC as they were transferred from.

  This isn't a fault with Rhapsody, it's part of the way in which DRM system has been designed.  Format RealAudio RAX of Rhapsody has circumvented this restriction by using the Rhapsody from Sansa e200R.

  Regarding the license updates in the last 24 hours, the real servers had issues.  The system is back today!  Yep, I met the same question, a handful of devices update last night.

  Bob

• I've not updated iOS 10 to my model MD544AE/a mini iPad.

  I've not updated iOS 10 to my model MD544AE/a mini iPad.

  why it is not so?

  Mini iPad 2 does not support IOS 10?

  It's an original iPad Mini, not a Mini 2 - the original Mini doesn't support iOS 10, it doesn't have the necessary equipment for him

  (I asked the hosts to remove the serial number of the title and after).

• Lion at El Capitan iPhoto update does not update iPhoto not available in the United Kingdom

  Lion at El Capitan iPhoto update does not update iPhoto not available in applications to the United Kingdom

  The iPhoto application has been replaced by the Photos app > Photos for OS X - Apple iPhoto support update

• Photo stream not updated

  My photo stream on my iPhone is fine. But on my Mac, it has not updated for some time. When I go to System Preferences > iCloud the area of the photo is not checked, same process on my iPhone it is. When I try to check on my Mac it say 'check library' and then do nothing. I tried to fix my photo library was well and no luck.

  

  Hello, metro0308!

  Welcome to the communities of Apple Support!  From what I understand your post, you have activated my photo stream to your iPhone, but you have a problem, allowing it on your Mac.  Of course, I know how it is great to have your photos of streams available on all your devices, and I'd be happy to help you.

  There is another way to turn on my photo stream, then try these steps instead:

  1. Open the Photos on your Mac application
  2. Click on the 'Photos' (top left corner, by the  menu)
  3. Click on "Préférences."... »
  4. Go to the iCloud tab (sign in with the same ID Apple you use on your iPhone If you are prompted)
  5. Place a check next to 'My Photo Stream'

  For your reading, I also want to give you the links to these resources we have on the functionality of my photo stream:

  My FAQ photo stream

  iCloud: overview of my photo stream

  iCloud: set up my photo stream

  Get help using my photo stream

  Have a fantastic day!

• Titles do not update

  When I place a title on the timeline in Final Cut Pro X and then I make a change to this title, say expand the police, that he does not play with the change.  If I then enter the title and move it a bit on the timeline, it updates correctly and plays.  This happens often.  I tried to use the menu "selected render' but it does not fix it.  In any case, why are my titles not updated when I adjust them?  This isn't simply by changing the size, it could be the color or anything like that.

  Try holding Option + command like FCP X starts.

  You can reset the preferences.

  What is the specific title or is this all of them?

  Al

• "Mail" will not update!

  After installing the new update for my iPhone SE my email in "Mail", will not update. No new email comes through. Thank God the "Mail" is updated on my IMac desktop computer. So, this must be a problem with the new IOS 10? Right? I know that if I contact my ISP provider, they will say that it's an Apple problem and vice versa. What should do?

  Greetings nuguy2,

  Thanks for your post. It seems that your emails only are not updated on your mail app on your iPhone after updating to iOS 10. I can't wait to hear this. I know that I trust emails all the time. I'll be happy to help you.

  Take a look at this article: get help with Mail on iPhone, iPad and iPod touch - Apple Support

  In particular, the best thing to do is to delete and re-add the account as long as your email account is configured for IMAP. Here's how to remove and re-add the account

  Remove your e-mail account and set it up again

  If you still have problems with sending and receiving e-mail, try to remove your e-mail account of your device, then add it back again:*

  1. On your computer, connect to the site is Web of your email provider to check that all your e-mail or check if your e-mail is saved somewhere other than your iOS device.
  2. On your iOS device, tap Settings > Mail, Contacts, calendars.
  3. Press the e-mail account that you want to remove.
  4. Press to delete the account.
  5. Add your account again.

  * iOS backups in iCloud and iTunes include a backup of your e-mail settings, but not your emails. E-mail deleted from your iOS device are not recoverable from iCloud iTunes backup. Learn more about backups in iCloud and iTunes.

  Take care