First 14 elements freezes with GPU compatible on Windows 10 H.264 encoding

Similar Questions

• Install error of Photoshop elements 9 with 32-bit of Windows 7 Ultimate

  Install error of Photoshop elements 9 with 32-bit window 7 Ultimate while requirements are Yes, Pl help .

  the message below is coming ' Please check application provider that it is an installation package valid window' thank you

  

  If you are using the Akamai Download Manager the problem lies perhaps with your Opera browser.

  Support is available for the following browsers:

  IE, FireFox, Safari, Chrome

  Everything that happens if you double-click the file setup - the one with the blue icon of PES?

• Common Lightroom freeze with GPU

  Updated Version published on 07/07/2015 2.1.3.121 yesterday. I frequently meet gel (lightroom not responding).

  Here's the info from the graphics card and the revision of the pilot.
  

  

  I've updated the Lightroom CC both the catalyst at about the same as day not sure if it is a new problem is caused by Lightroom or the last driver Catalyst.

  Photoshop seems to behave without problems

  p/s temporarily disable the GPU on Lightroom.

  Anyone having the same problem for this GPU?

  Mr. Eric J: using this forum post I was able to disable acceleration GPU outside of Lightroom. It now seems to work without freezing

• Interlacing Mercury Playback GPU acceleration of the reduction H.264 encoding problem

  I just managed to get my MSI GT780 running NVidia GTX 560 M video card has opted to use the GPU playback in first CS5.5.

  It is, when I visited full HD 1080 25 p AVCHD video, it playsback interlaced with lines on the screen still the images are progressive.

  Ideas and help please?

  After selecting H.264 Blu - Ray, at the bottom, click on the audio tab.  Change of PCM to Dolby Digital.  Then click on the tab Multiplex, then TS.  It'll it make one single output file.

  Honestly, I don't know why it would not mux the video and audio when you use PCM, but I wish it did.  You can use other software for multiplex files into a single file, but it's nice to have everything done at once.

• Impossible to install the software first Adobe Elements 8

  I have the original copy of the first Adobe Elements 8 with CD and the appropriate series number; However, when I try to load on my computer, it won't hold through with the installation.  I am running Windows 7 software with more of available space.  Please assist in this endeavour.

  [As published for the clarity of the question and the future forum search... MOD]

  The download, it's what you do to get a file from a Web site to your computer... The installation is what you do to have the installation files, put a program on your computer and link it to your operating system

  What is the error message?

  You may need to right click on the program icon and select compatibility Windows XP in the popup of option

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Photoshop Elements 10 is not Compatible with Windows 10 accoring to Adobe cat (Amit)

  I just wanted everyone to know what I have just been told by the Chat option on the site of Adobe by Amit. He said that Photoshop Elements 10 will not install on Windows 10 because it is not compatible. I asked what the options were and he said Adobe Photoshop elements 13. I aske if this was not totally compatible and he said he was under test at the moment. I asked how long it would be before finishing in tests and he said that he had not been told.

  I am very disappointed that Adobe is so slow in getting their product tested. I need to use this type of software, I now have to look at another application.

  I jump No. we else falls into this trap.

  MikeF

  Your Photoshop Elements 10 10 Windows (assumed 64bits) information obtained from Adobe is not correct.

  I upgraded a computer of Windows 7 Professional SP1 64 bit for Windows 10 Pro 64 bit and installed Photoshop Elements 10 of the installation disc 2 of 5.

  He had no problem installing it. No sharing of Technologies or other message that blocked the way to a quick and successful installation.

  I had a view of Photoshop Elements 10, when I went to open for the first time. The message read:

  "Some features of Adobe Photoshop Elements require that Microsoft Internet Explorer 5.0 or later is installed. These features will not work without it. "I got this message even after that I managed to install Photoshop Elements 6.0 on the same computer. The 6.0 and 10.0 properly on window 10 Pro 64 bit. Anxiety on the Microsoft Internet Explorer 5.0 or higher due to the fact that Windows 10 has replaced Internet Explorer with Microsoft Edge. But despite that everything works.

  Note: I find that Internet Explorer 11 is still hidden on Windows 10 and can be used there (PIN to the taskbar if necessary for convenience). See Local disk C\Program Files (x 86) \Internet explore if you need it.)

  
  

  In regards to the error of... shared technology that has a long history for Photoshop Elements and Premiere Elements installed. It can hit any version on any operating system. A lot of home remedies. One that worked for me and others is renaming the OOBE specifically to OLDOOBE folder and then install the elements.

  I have two of my computers upgraded to 64-bit Windows 10 and have many versions of Photoshop Elements and Premiere Elements on them. So far, I found that the problems are the same before and after the upgrade to Windows 10. And, in general, they run for me without problem.

  It is hoped that R_Kelly dwell on those not too big, just aggravating issues since I have not found their still as I managed to use Photoshop Elements 6.0 and 10.0 on Windows 10 64-bit. According to R_Kelly...

  BTW photoshop elements 10 install and run on windows 10, but there are some issues, not major, just aggravating circumstances.

  Please consider the above, before making your decision about moving forward to 13 items in Photoshop. But, remember, if history repeats itself, Adobe should release a new version in September October 2015 (presumed named 14 Photoshop and first items 14 and included organizing 14 elements).

  Any questions, please inquire.

  Thank you.

  RTA

• For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project.

  For first 14 Elements. I can't stabilize a 2, 7 K GoPro video: error message ' video size & project is not compatible. " Create a new project. Project automatically implemented by Adobe settings is 4K. Which the project settings to choose for a 2.7 K 25 fps?

  [title published by mod]

  Do not rely on such update. 2.7 K is not an ordinary resolution.

  You can import 2.7 K in ss14, you can't stabilize.

  First Pro CC 2015 to do this.

  But if 2.7 K files are introduced into a sequence of 1920 x 1080 you have the same problem, but this problem is corrected by nesting the images first.

• I would like to know, if the first 14 elements still work with Smart Sound? Thanks for a response!

  Hello, I love to give the music to my videos with Smart Sound Sonicfire. It works perfect in first 11 elements. So before buying 14 items first, I would like to know, if this still works with Smart Sound.

  Sorry for my bad English!

  First 14 elements has no interface directly with SmartSound, like older versions of the program. The program now includes Scores, that is Adobe tool for the creation of custom music titles.

  However, if you copy a piece of music for SonicFire as a WAV, you will be able to import that WAV in your Premiere Elements project.

• How much ram can take advantage of first 14 elements?

  So I'm looking to upgrade my computer, for most working with 4 k video in first 14 elements (and also for 3d rendering).  I have a new dual processor MB and will get used two Xeon e5-2670 and used ddr3 ecc.  I can get 32 GB for $50, or "Follies" and download 64 GB to $100.  I don't mind spending the extra money on RAM if it will make things run a little more fluid or faster.

  The last big project that I worked on had about 250 gigabytes of media for a 2 hour video - she included several tracks of 4 k and 2 k video.  I think that Premiere Pro would benefit all RAM than available memory, but I do not know if the Premiere Elements has a cap of some sort and would benefit all that RAM.  Anyone know? 

  It's really the CPU more RAM or GPU which determines the video processing 4K first Elements. Fortunately, you have a processor good, hearty.

  I can't imagine that you will see any advantage a jump from 32 GB to 64 GB of RAM. Not with Premiere Elements in any case.

• How to import DV files leave a Panasonic GS500 camcorder first 14 elements?

  He worked in an earlier version, and even if my PC recognize the video camera, first 14 elements does not.

  Is this a limitation of the product or I'm on turn on something?

  The ability to capture digital video tape has been removed in version 13, gary.

  As I show in my books, if you work on a PC, you can use WinDV to capture images of miniDV or HDV Split to capture HDV images via a FireWire connection and your video will be perfectly compatible with Premiere Elements.

  If you're on a Mac, you can use MovieMaker to capture your video the LifeFlix excellent, available for $ 9.95 from the App Store.

• SpeedGrade CC 2014.2 build 8.2x51 reading smoothing / jerky 4K with GPU R9 295 x 2 - it uses only 2 GB of RAM (8.1 Windows 64-bit), Mac OS - same problem

  Hello, guys

  I have following configuration:

  I7-5960 x 4.3 GHz

  32 GB DDR4 RAM

  ATI 295 x 2 8 GB (Gpusniffer.exe watch 3072 MB on each unit of Hawaii)

  Samsung XP941 Ultra M.2 (> 1000 Mb/s)

  Some 850 Pro SSD for H.264 4 k source

  Latest version of Speedgrade CC 16/02/2015 (DUAL MONITOR SETUP - 2560 x 1440 for Interface and 4096 x 2160 for previewing)

  I work with a lot of short 10-15 seconds 4 K 4096 x 2160 24 fps H.264 clips of Panasonic GH4. Import their first CC as some stabilization warp, cut them, save the project and opened in Speedgrade CC all are fantastic smooth in first CC.

  Speedgrade - a simple color - exhibition, some keyframes and simple scoring correction for certain substances. I use the GPU acceleration for sure have lots of 4096 x 2160 4K 24 fps. But it is not flexible and smooth after that a correction is applied. Everything is jerky and freezes the first seconds, when I press 'PLAY'. I used resources, the Manager monitor tasks (Winodws 8.1 64-bit) and Afterburner. And there's what I discovered:

  • Afterburner shows the use of mono-GPU (as we know it for playback only 1 GPU used) the same amount as in first. SpeedGrade CC use 2, 5 GB of VRAM. Also, if I use one zero effect - accelerating gpu, like "transform", for example, imported first, I get "not enough GPU resources" message in Speedgrade. Afterburner shows, CC Speedgrade tried to use more, and then Max 3GB available VRAM during that time. So I turn off these effects, before you open a project in Speedgrade.
  • CPU is low (15%) use, perhaps a little lower, then in the first CC
  • Disc - 3-10%, H.264 is weak on this subject
  • RAM! -is the problem. I have been authorized to use the 29 GB of RAM for Adobe apps. Speedgrade CC use no more then 2-3 GB according to the the Task Manager (for most 2 GB) and 8.1 Windows resource monitor 64-bit Pro. After I finished with the color correction, a project open in first DC, work with lumteri on smooth and! First CC use 9 to 10 GB of RAM to play the same music video in full resolution smoothly!

  
  

  I already reinstalled everything, including drivers for the GPU, 8.1 for Windows and Adobe CC even result.

  MacBook Pro 15 retina end 2013 with i7-4960HQ/16 GB of RAM/Geforce 750 m UPDATE!

  Under Mac Os Yosemite 10.10.2 - same situation here. First CC use 5 GB (of 11 GB of available) 4096 x 2160 Prores 422 HQ and is usable, smooth with a few drops of frame.

  SpeedGrade CC uses 2.5 GB RAM of 4096 x 2160 and it is impossible to use plenty of 4096 x 2160. Only 1/2 resolution of overview is smooth and usable on the screen of the laptop. 4096 x 2160 externally connected through Thunderbolt monitor, it's a lot rougher, I think it's hard for 750 m with 2 GB of VRAM.

  UPDATE! Previous version (CC 2014) of first CC and CC Speedgrade Windows 8.1 64-bit - even situation.

  
  

  What do you think?

  
  

  My opinion - Speedgrade CC is not optimized for 4K resolution. First CC is good for 4K.

  BTW, for more information, latest AMD catalyst driver 14.12 omega has a problem with my R9 295 x 2 and engine reading Mercury (MPE) OpenCL - just black with sound screen, when I turn on the GPU acceleration. So I use the previous version of 14.9. With 14.12 GPUsniffer.exe found a device with 4 GB of VRAM GPU and a GPU with 3 GB of VRAM (normally obligatorily 3 + 3 GB 295 x 2 Dual GPU radeon chip).

  Yes

  So, finally, Speedgrade CC works 95% smooth time with 4096 * 2160 H.264. But it was necessary to turn off all effects in first Pro CC. Nothing new. I found a few discussions on this fact, but after that I spent some time with experiences.

  Stabilizer Warp even alone is enough to make Speedgrade CC really agitated. 'Transform' effect simply blocks Speedgrade CC with "GPU resources.

  Each effect uses some VRAM (for Warp stabilizer 200-300 MB). After you have disabled all effects had load VRAM under/near 2 GB for the little clip 4096 * 2160.

  First CC flies simply with unique x 290 or 295 x 2 (which is the only x 290 during playback). Even 3GB VRAM available software Adobe CC.

  PS Macbook Pro retina 15 "with Geforce 750 M 2 GB VRAM would work smoothly with Prores to half a preview/playback resolution - 2048 * 1080. CC CC SpeedGrade or Premiere Pro with 1/2.

• Help please.  Photoshop elements 12 is fully compatible on Apple Mac OS 10.9.3?  Thank you very much.

  Help please.

  I am looking to buy Photoshop elements 12 for a new MacBook Pro OS 10.9.3.

  Any who would confirm that the 12 elements would be fully compatible with this operating system?

  Info on Adobe's Web site suggests it will take place on 10.9, but not sure about this new version 10.9.3 (Mavericks or how it is called).

  Anyone know?

  Your best bet before buying anything is to try first.  Here is a link to a page where you can download thr trial version:

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_elements&loc=en&promoid=DJDV C

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• This is the message I got: your version of obsolete Microsoft DLL components is not compatible with this version of windows

  I'm currently running Vista Home Premium SP2 a 2 year old computer.  I loaded some software call professor teaches the basics of basic HTML and advanced.  It load on my computer very well and in fact I was at Midway through a program (this is an interactive format where it shows you examples, allows you to type in some information and shows you the result) and all of a sudden I got this message: this obsolete version of DLL Microsoft components is not compatible with this version of windows.  I clicked on the link that says I could check online with Microsoft to see if there are any patches, but she came back with nothing.   It does not work on XP.   Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner