First apostrophe typed is reversed, the second is fine

Similar Questions

• Intermittently, jumping to the first and the second slide instead of the conditional action

  Hello

  I have an action on the first slide in my Captivate program (7 Captivate), (press Enter) which says that if your variable = this, go to a slide specific (v_lastmod = 1, jump to slide 4) and I have about 19 of these if statements in the action.

  What I notice is sometimes (intermittently) rather than to go to this particular slide, he would go to the first slide and continue on the second slide (and obviously not stop there since there is a pause button). If I click on update, then it reload again and go to the slide by the action.

  I tried to add a loop where the else statement repeated the action, just in case it might be a problem of preload? That doesn't seem to work. It would be just stuck on the loop. I also tried to add a preloader by default preload that Captivate and always intermittently it crosses the first slide and just keep to the second slide (unless I hit refresh, it will take me to the appropriate slide). I also tried to add Else, keep, but no change.

  Any ideas or suggestions?

  Thank you

  Ruth

  It is not a good idea to have such a pretty complicated advanced right action on enter to the first slide. It must be generated at run time and the offset is probably what you see. Try adding a short welcome slide before this slide, which has no action on enter. That might solve your problem in a simple way.

• Use the second airport only ethernet

  Here's what I want to do:

  I have 2 extremes of the airport. One on the second floor, connected to a modem. And the other on the first floor. I want the second Airport extreme on the first floor to connect to the Internet via the first airport extreme but only use its ethernet Sockets and turn off its own wifi. Which means the only way to use this airport for you to connect to the Internet is to use its Ethernet port. Is this possible?

  Possible if the first floor AirPort Extreme connects to the AirPort Extreme with a permanent floor, wired Ethernet cable.

  Is not possible if you want that the first floor AirPort Extreme to connect to the second floor AirPort wireless.

• How can I add a game action on an object that contains the first click and read reversed to this object even a second click action?

  How can I add a game action on an object that contains the first click and read reversed to this object even a second click action?

  First create a symbol of the object.

  Then add the code in the event click on this symbol as below:

  Insert the code for the mouse, click here

  var bReverse = (sym.getVariable ("reverseDir")! = undefined)? (sym.getVariable ("reverseDir")): true;

  sym.setVariable ("reverseDir", bReverse)

  {if (bReverse)}

  sym.playReverse ();

  }

  else {}

  SYM. Play();

  }

  HTH,

  Vivekuma

• When right-clicking on a link and a window opens, I want it ask me "Open Link in New Window" first of all, not the second. This has changed in the last update.

  So I got allows you to right-click on a link and go the first option and open this link in a new window.
  I don't not like tabs, or use them.
  The latest update or version of Firefox has changed this and now
  Open the link in a new tab first, then
  Open the link in a new window.
  My question is, how can I change this back to the way it was.
  Thank you very much
  TREV

  My problem is the opposite of the OP, but the result is the same. Years of the use of previous versions of Firefox have conditioned me to open links in a new tab by selecting the second choice of right click menu without looking. After a week of trying to readjust in places reversed 'Open link in a new window' and "Open link in a new tab", I'm always unintentionally opening new windows instead of tabs every time after time. The point is, why should I have to adjust (or need a plugin external to solve your problem). YOU TEACHES ME HOW to DO THIS WAY, then why you changed it? Do you think that the reversal is most effective? A task force of new users select the new range? Do you have a taste of trial with Pepsi? Have you adopted Microsoft 'we know what you want better than you' policy? People in the drive of England on the left side of the road with the steering wheel on the right. Maybe it's actually a better way to do it. Maybe we should just rethink all cars new American model in this way and reverse all the signs from one day to the next without any warning - no ads, no choice, do it just because the engineers decided that it is better. While we're here, maybe you should adopt menu 'Ribbon' of MS then. I do sound a little angry or like if I have too much time on my hands? If so, it is because I am and I do not have enough to relearn the same tasks whenever you think of a better way to perform a basic operation. I'm sick of being 'improved' perfectly feasible programs to offers no improvement, only the need for a conversion.

• When I have two open browser windows, the first with several tabs, the second a window from a link (if one tab), and close the second window, I Quit Firefox message, ' do you want to save the tabs...?

  This was happening with FF 3 before moving on to 4 and not going on with FF4.0 until the 4.0.1 update has been applied, the first time, he ran. Same problem on another computer running FF3, so maybe a related problem of the extension.

  If I have three windows open and close the third, I don't get it. Only when two are open and one is closed. I could have three, close one, then the second and get the prompt.

  Non-disabled extensions
  Adblock more
  BugMeNot
  Cooliris
  Download Statusbar
  DownloadHelper
  DowntThemAll!
  FireGestures
  HTML5 Extension for Windows Media Player
  HTTPS everywhere
  Java Console
  Download the PDF
  Session manager
  TinEye Reverse Image Search
  YouTube how Snob

  People with disabilities

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• I signed up for sync on a single computer and got a code of twinning on the second computer, but now I can't make it appear the screen pairing on the first computer. Why not?

  I set up the synchronization on the first computer, then got a code of synchronization on the second computer. Now I can not bring up the screen of synchronization on the first computer to synchronize all.

  Try to dissociate this computer (device) and reinstall Sync.

  Alternatively, you can verify the name and the password in the password manager.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".

  Your account name and password for Firefox Sync is the e-mail address and the password that you used to create this account.
  
  Account: email address and password - the sync key: (26 characters, no hyphens)
  
  You can find the sync account password and the key of synchronization (recovery) in the password manager on computers where an account to synchronize with a specific e-mail address has been implemented.

  Search:

  • chrome://weave (password Mozilla Services)
  • chrome://weave (Mozilla Services encryption key)

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• When bi-ecrans is used, and firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.

  When bi-ecrans is used, and Firefox is on the second monitor, the Firefox menu does not appear. Same thing happens to the bar when typing already visited sites of addresses.

  I have the same problem and I got rid of it by disabling hardware acceleration of rendering in the settings dialogue. Now I see the Firefox menu properly on a secondary monitor.

• I sent 2 SMS to the iPhone even from the same location 1 hour out. Why I was charged for the second message, but not the first?

  I sent 2 SMS on the phone even in the same place 1 hour apart. I was charged for the second message, but not the first. Why charge me? I was under the impression that the messages sent between iPhones are free?

  I was under the impression that the messages sent between iPhones are free?

  It's a little more complicated than that.

  If the message is sent as an iMessage (blue) uses the data that could be part of your cellular data allowance or WiFi depending on what you are connected to. If it is sent as SMS (green) it takes however your carrier charges you for SMS.

  For a message to be sent in an iMessage, both parties need to have a device capable of iMessage (e.g., iPhone, iPad, Mac), iMessages allowed to have (settings > Messages > iMessage > on) and be connected to the data (Wifi or cellular).

• HP dv5 first recovery disc loaded, but never asked for the second

  HP Pavilion dv5t-1000, p/n KQ574AV Windows Vista 32-bit, I have a set of recovery disks that I made before I started using the machine.

  Yesterday, my laptop froze during the download of reader photos.  System rebooted to a black screen with cursor flashing at the top left.  Removed the battery & power cord; power button down for 15 seconds; restarted the computer to another black screen.  Repeated several times.

  A disk failure hard while slot guaranteed 2 years, including fixed hp.  On the keyboard Panel, the three before white lights: power light, lightening bolt not away and hard drive/array turned on & strong flashing.

  The recovering of the disks and rebooted the computer.  "Windows is loading files...". ' First disc ends, but computer never asks for the second recovery disk.  Screen changes from black to blue.

  New message: PC it is not supported by the system recovery discs.

  You will not be able to continue to recover this system with disks.

  Can someone help me please!

  Hello

  Ok.

  If you get a disc error, then it would seem more likely to be a hard drive failure.

  View the results you get on the test drive.  If your drive is failed then try to restore or recover simply will not work. A replacement hard drive will be necessary.

  You may be able to recover your data on the disk by putting it in an external enclosure and connect to another Windows PC.

• The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to resolve this ongoing problem with Apple's iTunes... help me solve

  The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry

  Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert