First gen HD will work in a more recent iPod

Similar Questions

• What photo applications will run on the most recent ipod

  I teach courses in digital photography for seniors.  I don't personally have an iPhone.  If I buy a new ipod touch download photo even apps that would be used on an iPhone?

  I would like to learn how to read a histogram and set exposure on their iPhones these photographers.

  Mary Lou

  Most of the iPhone apps will work on the 6G iPod. You will need to check the compatibility with a specific application to be sure

• more recent IPod jump sings more than deffinetly out there

  I just got my IPod on May 27. It was working fine when I finally turned it, on Tuesday last week. I turned today and it will play only 2 songs on one of my playlists and will not play these songs sound jumping at all. I really need this playlist is pretty important, so, if possible, could you tell m what I can do to get it to play play these songs 5 or 6, he is ignorant.

  You can try to restore and recharge the device. Was it updated between the time where he worked, and when those securities stopped playing?

  TT2

• Premiere Elements will work with Windows 8.1?

  I recently got a new HP laptop and I did not notice it was 8.1 windows! so I was wondering if I myself first elements, would that work with my laptop? I had downloaded once but there was no installation and I was hoping to buy back cause ive heard great things about it! Help, please!

  AE13H

  First 13 elements will work with 64 bit Windows 8.1 and assumed with 32-bit as well. Your computer operating system 32 or 64-bit?

  I have installed and run first elements on Windows 7 64-bit and Windows 8.1 13 64-bit with no problems.

  What version of Premiere Elements that you are trying to install and could not?

  There has been major changes in workspaces 9,0/9.0.1 13.

  It would be to your advantage to download and install the free 30 day trial of first items 13 to

  determine whether it is compatible with your computing environment and the objectives of the project. Although you can find some new

  features of the program, there was some significant moves of the program.

  http://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

  And organizing items 13 differs from earlier versions of it.

  You can check out my blog on first elements 13 First Look and first elements 13 discoveries every day.

  http://www.atr935.blogspot.com/2014/09/premiere-elements-13-first-look-details.html

  http://www.atr935.blogspot.com/2014/09/premiere-elements-13-daily-discoveries.html

  Please update us on your progress when you get a chance.

  Thank you.

  RTA

• Will 1st gen magic mouse will work with the new Mac Mini?

  #1

  I'm going to buy a new Mac Mini and one of the options is to add a second magical mouse of gen. I have a first gen magic mouse. I guess this first mouse magic gen will work with the new Mac Mini, but I want to check.

  The old mouse Apple and any other generic pc mouse will work fine with the Mac Mini.

• Love at first sight for usb cable will work for migration?

  Love at first sight for usb cable will work for migration?

  Migration from what to what?

• The bike 360 Gen 2 charger will work in Australia?

  The bike 360 Gen 2 is not yet released in Australia but I would buy one and shipped it to the Australia.

  Does anyone know if there will be problems with the loader works in Australia? I guess I would need to get the adapter to allow me to plug into an Australian power but it would be my only question?

  Unless of course someone knows the release date of the Gen 2 in Australia and it is really close. Then maybe I could wait!

  Thank you very much

  The Australia standard supply voltage is 230V 50 Hz. us. and Canada use 100/120V 50/60 Hz. The power adapter supplied with the bike 360 Gen 2 will use 100-240 v at 50 / 60 Hz. You only need one to two U.S. pins on Australian adapters to make things work. Adapters are available on the internet for less than US $5.00.

  I hope this helps!

• I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  I'm registered for adobe elements ver 3 first. . Any body know where I can find down load? Or y at - it a newer version that I can download that my serial number will work with?

  There is no download available for version 3 I know - version 9 is the most ancient available offered by Adobe.  Serial numbers are valid only for the version that they were purchased for.

• A Capsule of 1 TB will work with OS 10.11?

  Because I like to keep all my Apple hardware, I was looking at getting a Time Capsule backup to my new iMac comes with OS 10.11 (El Capitan). My question is this - can anyone tell me if an older model of 1 TB (MB277LL/A) will work with my setup?

  Thank you

  Carl

  This model was abandoned more than 7 years ago and is officially classified as "obsolete" by Apple, which means that if you have a problem and are willing to pay, Apple still will not help you with this device.

  Most of the 1st Gen Time Capsules failed in about 18 months. Few make it to 36, and very little done to 60 months, so unless the model you are looking at has a new power supply and new hard drive that was installed in recent years, it would be best to stay away from this model.

  If the product has not been updated with a new power supply and hard drive, it's almost a miracle if it does not work.

  Assuming that really fall into place, you will need to check to make sure that the time Capsule has firmware version 7.6.1 or later version to make it work with your Mac using El Capitan.

• HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

  Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

  I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

  In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

  If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

  You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

  I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

  Now to make it work...

  I had some questions:

  When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

  What finally got it to work:

  I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

  For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

  I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

  Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

  Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

• DASYLab 5.6 will work with one nor 9171

  I have a NI USB 9171 a universal module with an older version of DASYE Lab 5.6, I have not yet loaded the software. But I was owndering if the Dasylab will work with automation of the measurement? I installed the MY LabView Signal Express, it is just too much and I want to use something more user friendly

  Thank you

  You ask if 15 years old software will work with a new device of NOR?

  Not very likely.

  First of all, the supported operating system is very different - V5.6 only was not supported with XP, Vista, Windows 7 or 8 (they didn't exist!).

  V5.63

  • Windows 95
  
  
  • Windows 98
  
  
  • Windows ME
  
  
  • Windows NT
  
  
  • Windows 2000

  You can upgrade your DASYLab V5.6 V13 and get full current operating system of assistance and full device support OR.

• AT3-600-UR33 Acer will work GoPro Studio 2.0 video editing software?

  I am considering the AT3-600-UR33, which is available on the emachinesredeem site. Can someone tell me if this PC will allow me to start the video editing software provided by GoPro for their cameras? The minimum requirements that they list on their website are CPU: Intel Core 2 Duo; Graphics card supporting OpenGL 1.2 or higher; 4 GB RAM or more; Internal drive hard disk 5400 RPM; Quick Time 7.6 or higher. Here is the website http://gopro.com/support/articles/what-are-the-minimum-system-requirements-for-gopro-studio

  Thank you for your help

  Hi LMinCT

  The Dual core Celeron is not as good as the chip Core 2 Duo - everything will be OK.

  In theory - the answer is "maybe", but this isn't the ideal machine for your software, unless you can find another sequel that will work with the Celeron to video editing.

  The machine will run slowly, while using, even stop if HD video processing, and that it provides will allow you to install it in the first place.

  The AT3-600-UR33 is not a bad machine, it's just for everyday use.

• Studio XPS 9100 Radeon HD 7950 what brand will work?

  Currently in research to upgrade the 5770 in my XPS 9100 with a 7950 and after checking if an upgrade would be possible for this machine I came across several posts that say I'm able to upgrade. After looking through several brands, I had made my mind up on top of the Gigabyte brand but after having looked more into it, I noticed several posts on different sites and a review on Amazon who said they had problems with this card specific gel. If you would be grateful if anyone knows of a brand of 7950 that will work. I know that I will probably not be able to get an answer from someone who has actually upgraded a 9100 XPS with a 7950 I prefer, but any suggestions would be greatly appreciated since I have found no information on other cards installed in the XPS 9100 on the Gigabyte brand does not.

  Maybe Sapphire changed this on Vapor X model.  If this is the case, I'd go just with those that are confirmed to use just two 6-pin connectors, so you have no worries as this one HERE.  However, I would also consider the MSI TF as a good choice HERE.  As in the case of Dell cooling is never the greatest, I would look too GTX 660 Ti EVGA of external evacuation models.  Depending on the game, these two trade just kicks back in performance so that you would probably never notice no difference between the two except that the Nvidia GTX 660 it can just play games today smoother than the AMD card.  But then again, 4 games free vs a free game is a big difference if you like what you get.

  I'm going to guess that there is a problem that we're trying to fix with the Vapor X model if they are exchanging with two 8 pin after the first release.  Most HD 7950 s use only two 6-pin and the 7970 s HD using one 8-pin and a 6 pin.  GTX 660 Ti uses only two 6-pin for sure.

• I need to disable a copy of Dreamweaver CS5 so that I can activate it on another computer. The first computer crashed, so the program is more about it. How do I disable?

  I need to disable a copy of Dreamweaver CS5 so that I can activate it on another computer. The first computer crashed, so the program is more about it. How do I disable?

  I was finally able to get on a chat session with an Adobe employee and the problem has been resolved. She told me to "Skip This Step" then screen here and it worked (when I had tried that before, it did not work, but that was before the deactivation was made for the computer on which crashed). I hope that this will not cause any kind of problem ID and password in the future, but for now, the program is back up and functioning normally.

• First 12 items will make only a few of my images?

  First 12 items will only allow me to make some of my images, while it will not be rendered at all other sequences. The images that he makes has a green line above it in the workspace and no line no more than images that will not be rendered. I use a MacBook Pro and a LaCie external hard drive to import my images and save my project. Any suggestions? Thank you!

  reagan_anderson15

  Thanks for the reply with a lot of very useful details to work on troubleshooting.

  If I gathered your data correctly, what we have are files that read with a delay or stop but not offers the possibility to render timeline to get a fluid reading for them. Line color of the project made indicator (green or no coloured line) it's the best possible overview for them. So, at this point, we want to make the distinction between a corrupted file and a preview of the project. Assuming that this is a problem of preview only...

  What we will do is force these problem files to restore and then see if the rendered script files read less LAG and stops.

  Right click on each file problem, select Time Stretch, and in the Time Stretch dialog box, replace speed to 99%. OK to get out of there. Each file must have an orange on line now. Press enter on the main keyboard on the computer or the Render button above the timeline. When the timeline is rendered, the orange line will be green. Any improvement in reading now?

  The foregoing has worked in at least another case similar to yours.

  RTA