First HP Calculator: basic use

Similar Questions

• The first graphing calculator HP will not update. Stuck at x 2 + y2 = 1

  I tried to update my brand-new first HP Calculator graphic using a version update of the HP connectivity Kit.  The update failed and the calculator will reset but not exceed x 2 + y2 = 1.  I tried to use the following manual method of a post on Educalc and the usbtool will not load the update.  ANY HELP, PLEASE!

  Of HP first Firmware update manual

  1 download the firmware files and unzip into a folder

  2 wipe Calculator (optional)
  a grip on the keys of F, C and O while resetting calculator
  b to the menu, press 4.3, then enter
  c when the format is complete, go to step 3

  3 given to zero Calculator (back button) while holding the button "Symb".
  (poster or screen update tool ARM or recovery mode)

  4. connect the computer using the USB cable
  (wait of recognize the device USB)

  5 run usbtool.exe

  6 select the check box 'Auto update '.

  7. click on the button "Update".
  (blue bars will show that the unit is updated)

  8 calculator reset

  Note: If a step fails, please proceed to step 3

  Please, do not update your HP Premium using Parallels on a Mac Desktom.  I tried and the drivers of USB Port would not allow the update completed successfully using HP Connect, the Update.exe program or the application of usbtool.exe.  I managed with the help of an old laptop on XP using the USBTool.exe application using a native PC environment.

  I will say that I am running OS X 10.10 Mavricks Beta 2 on my MAC, but I don't think it's a problem, although I will know Parallels.

  If you use a MAC, borrow a PC (ugggh) to update your first HP.

  NOTE: the usb tool is displayed as part of the ROM for HP Premium updates on educalc.com at: http://www.educalc.net/2336439.page

  David

• spatial memory - should my Vista Home Basic use 21 GB of memory

  should my Vista Home Basic use 21 GB of memory on a computer acer laptop

  Memory RAM - it seems that you may have about the hard disk space that is different.

  It is normal that Windows Vista use 21 GB of hard drive space.

• I'm a newbie to Blackberry - smart blackBerry phones which is the first step to successfully use the instrument?

  I am a newbie to Blackberry - what is the first step to successfully use the instrument?

  I just bought my first blackberry phone model-9810. What are the steps or the procedure I should follow to use this instrument, i.e. features first, internet phone features later. Your help for a newbie is very appreciated.     All the best!

  
  

• I use the first items 14 and tried "with instructions" make a black and white video with a special color. At first, I have to use the Darkred effect, but it has no effect. Other effects do not work. Can I get the desired effect?

  I use the first items 14 and tried "with instructions" make a black and white video with a special color. At first, I have to use the Darkred effect, but it has no effect. Other effects do not work. Can I get the desired effect?

  You mean the Edit guided for a video of Black & White with color Pop, right?

  If so, the program will be directed to the Hollywood Look effects Panel and black red effect.

  If this isn't what you are doing, please let us know where you find "instructions" there is no effect of dark red I know in the program.

• Can I use a font that comes with a subscription to Adobe first Pro CC to make a video intro with Adobe first Pro CC, for use in videos from Youtube that will be monetized?

  Can I use a font that comes with a subscription to Adobe first Pro CC to make a video intro with Adobe first Pro CC, for use in videos from Youtube that will be monetized?

  If so, I'll be able to continue to use this intro for these purposes, if I decide to leave the subscription?

  I looked this info on the EULA for Adobe fonts and the font itself, but the information was not conclusive.

  Thank you!

  Licensing - in particular for fonts - is always a big pain - and even if you have a lawyer paid handsomely on the case, it is always a challenge to navigate in all licenses of the difference and the different situations.

  In reality, the chances of trouble to use a font Adobe provides as part of the suite Creative Cloud is little or none - even if it's TECHNICALLY in a kind of fine print.

  However if you are doing a project where you must provide tangible evidence that everything is legally more High Council (which you have to do a lot of time for projects that are funded for example the Government), then things can become difficult.

  In the case of Myriad Pro - even though the creative cloud agreement specifically lists the fonts in the list of the restricted fonts - you can always register Myriad Pro through Adobe's Typekit service (see: Myriad Pro |) Typekit) so that circumvents this problem.

  My advice - if you need evidence that the fonts of your use of any good - then I would contact Adobe directly, in order to have their response in writing. See: https://helpx.adobe.com/contact.html

  If you are just doing a personal project, and you put the work on YouTube (even if you get advertising revenue as part of the YouTube partner program), and then the case to get into any kind of trouble because of policies is VERY thin - but if you want to play it is really safe, it is best to do your research , and make sure you have something in writing say that everything is perfect.

  If in doubt - talk to a lawyer, because they will be able to do a risk assessment appropriate - even if it is somewhat a grey area.

  We had similar issues trying to license of Adobe Stock content - a few clauses in the agreement that is very unfortunate entertainment lawyers.

• Hi bought first 14 elements I used the activation code to get the serial number, but when I type the SN it says we cannot validate serial number

  Hi bought first 14 elements I used the activation code to get the serial number, but when I type the SN it says we cannot validate serial number

  any help

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

• Is it possible to accelerate from first Pro CC 2015 using metal API?

  Hi, I just upgraded Mac Pro (end 2013) double AMD over-pants D700 at OS X El Capitan of Mavericks.

  Is it possible to accelerate from first Pro CC 2015 using metal API? If Yes please tell me how to do it.

  Thank you.

  Dwarf

  Hello

  From now on, it is not possible.

  Thank you

  Regalo

• Help, I can't open any of my files in adobe first pro cc 2014, using the 30 day trial of creative cloud, every time, I try to view my files, it crashes!

  Help, I can't open any of my files in adobe first pro cc 2014, using the 30 day trial of creative cloud, every time, I try to view my files, it crashes!

  Hi Sheila,

  Try this:

  Before you import your files, go to file > project settings > General and change the rendering engine video software of Mercury playback engine only. Click OK, and then select Remove previews. Then import your files.

  I would like to know if it works.

  Thank you

  Regalo

• First to crashing. Using the Blackmagic intensity Pro HDV sequence

  Hello. I'm with the first edition. I use an intensity pro card (blackmagic design) with
  Graphics Nvidia Q4000. It crashes on me. More with the HDV footage I'm editing.
  I have included my computer form as well as the news media of my layer source footage and sequence settings.

  Any help with this would be much appreciated!

  

  

  

  I checked your power supply based on your list of components, and he gave me these results:

  

  These numbers are without any margin of safety. Generally, I recommend adding about 10% for security. If I look at your power supply, it shows these data:

  

  This tells me that your + 5V rail may be a weak point because of missing with this power supply amperage and worth a visit. Your system needs a combined power of nearly 190 W but delivers only 150 W on the + 3.3 and + 5V rails. It also shows that it will be difficult to make a system more balanced with better disk i/o, because the power is not sufficient to add a dedicated and some raid controller most records. I would not be surprised if the power supply is the culprit here, but let your computer check this. And allow him to carefully check the time CPU, mobo, the GPU, both idle and load.

  A good setup for a balanced with such a powerful processor system would be something as described in the system of 'Warrior' here: Adobe Forums: PC to build? An update...

• HP question first basic use - how can I enter constraints?

  I would like to be able to specify constraints for graphical representation of a function, a function of problems. Let us look at the graphic representation first. For example, I would draw sin(x) a specific interval such as halves of the halves negative pi positive pi. On a TI-nSpire, the vertical bar is used as a symbol to do this kind of thing - sin (x) |-pi/2 < x < pi/2. where pi is the symbol for pi.

  I don't know if there is another way to do it, but using the case model would work.  0/0 makes the function not defined outside the - pi / 2 and pi/2 limits.  If you want, after you enter the model, the function can be edited and "0/0" can be removed.

  

• First HP Calculator virtual missing mfc120u.dll error since upgrading to version 1.21.8151.102

  The first HP Virtual calculator will not start since the last update (version 1.21.8151.102). A windows system error window appears when you attempt to start the calc virt, saying: "the program can't start because mfc120u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  Needless to say that "resettlement" has not fixed the problem. It is clear from research that the specified DLL is associated with related debug versions if you wonder if the last version was poorly built? Does anyone else have this problem? Any solution of HP? I had to go back to my "shipped" version that is less than optimal. It has been no problem so far with my device real first HP since the last update of the firmware so phew... but the virtual calc is very convenient when working on the PC with the code.

  I am running windows 7 64 bit - all the latest updates applied to MS etc had no problem until this version of the vCalc

  A possible scenario:

  • During installation, the 64-bit OS is recognized and installed the 64-bit version of the redistributable.
  • The emulator is probably a 32-bit version (compatibility, 32-bit programs usually work on 64-bit systems, but not vice versa).
  • There looking for the 32-bit version of the redistributable is not installed.

  Note, this is one of the many possibilities in the world of software. However, the fact that 32-bit programs require the redistributable 32-bit and 64-bit programs require 64-bit redistributable is why I suggested to install both versions. It is not only useful for the HP emulators, but many other programs (this is why I have so many people already installed).

  Best regards.

• First Graphing Calculator Identification of old Version of main material has

  Hello

  I tried to update the firmware to the latest version (2014-07-02 (6031)) on my graphing calculator of premium without success, the release_info.txt file which indicates (for 2014 03 31 (6030) firmware version):

  There is limited between that backward compatibility and earlier releases.

  First older hardware (revision A) supports this version, but the stream without thread-to-unit and data functionality is not supported on previous models. In the first screen HP help > revision of material appears with the software version information.

  How will I know if my calculator hardware number is A revision material?

  Is the version of CASE the number of material?

  Thank you very much

  H.

  Hello

  All primes of HP are upgraded to the version 6030 (note that 6031 is for PC emulator only). It's just that the material has a problem with certain communications.

  Firmware version prior to 6030 (5447 and older) do not show the hardware version in the display 'a way'.

  When you upgrade to 6030 the hardware version will appear on the display 'a way'.

  Alternatively, you can determine the version of the material from the model number (located on the back of the box she approached, the bar code):

  NW280AA is A revision material

  G8X92AA is the review material C

  In addition, the following process is recommended for the upgrade of the premium:

  Install the connection from the CD Kit.

  Once installed the connection, update the calculator.

  The following method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.

  Kind regards.

• Basic use of ESXCLI

  Hi guys,.

  Sorry to be a dummy, but I am really struggling with doing the esxcli in my work environment. I have two PC with installed esxcli. On the Win7 machine I don't know even how to start the CLI and on the Ubuntu machine, I know how to start but I'm struggling with the syntax of the command. Basically, I wanted to try to force a shutdown of a virtual machine on one of our three hosts, but I don't know how to specify the one that I want to connect.

  I started to follow the instructions here: VMware KB: turn off a virtual machine on a host ESXi

  But when I type:

  Esxcli vm process list

  He asks me to specify the host.

  So I tried:

  Esxcli vm 10.3.0.72 process list

  and then she complains about syntax.

  Can you please point me to the right direction?

  
  

  I have two 5.5 hosts and a 5.0 host.

  
  

  See you soon,.

  Martin

  The syntax you ar using may require you to first ptty/ssh on the server and then run the command.

  If you want to run it remotely you must - Server put it as:

  esxcli - Server 10.0.0.1

• Stabilizing Warp 4K for HD - PPcs6 interpolate first then reduce when using "stabilize, crop, autoscale?

  I use CS6. I warp stabilized my 4K images and want to output HD best quality that I can. I have two choices: I can have either stabilizer warp 'stabilize, autoscaling of cultures' then I simply visited HD or I can put 'stabilize, cultures' and get rid of the black border (harvest) with SOUL in the export settings. So my question is: if I use the option 1 PP interpolate the images and then to "reduce" HD, thus reducing quality? Or PP done do all the calculations "at once" so the image is not actually interpolated then reduced? I hope that I have explained this clearly - though I don't mind :-) Thank you for your comments. Paul

  I did experience exactly the same thing.  My conclusion is that stabilize, crop, auto scale indeed crop the video first and then resize to the resolution of original frame. So, there is a lack of quality.  I work on 4K video and warp stabilize first (no culture, no automatic scale), then cropping as a sequence of nested HD (with a key-frame to follow the action).  Depending on the amount of harvest, which is the video content, and because you start with 4 K images first, one wonders if the HD final rendered output is visually different whatever method that you choose.  I guess you know only by trial and error.

  Steve