First, keeping the creation of media to the HARD Drive Cache files if it is full

Similar Questions

• the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily?

  the hard drive of my computer is purchased full.i a drive.how external hard change outside the primary disk so I can download music easily.right now my external backup just my computer that isn't doing me good

  original title: external hard drives

  You don't want to change your external drive to your main drive.

  You can move your music files on the external drive - or you can move other data on the disk to make room for your music on the internal drive.

  What applications do you use to play music?

  As described in the first link below, you can move your full "My Documents" folder on the external drive.  Alternatively, you can simply move your music files.  If such an arrangement would give you a satisfactory performance, however, depends on how your external drive is connected (for example, USB 1.1, USB 2.0, USB 3.0, eSATA, Firewire, network) and other hardware features of your computer.

  Not all of the following conditions will be applied to you, but some of the tips can be useful.

  There are a number of things you can do to- temporarily - free up disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)
  • You can remove most of the $NTUninstallKBxxxxxx files $ following the directions here: http://windowsxp.mvps.org/Hotfix_backup.htm (read the warnings in the gray box first)
  • See also:

  " How to recover disk space on Windows Server 2008 and Windows XP computers? ."

  " Forty ways to free disk space ."

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location.  You can not simply move the files.

• A new XP installation will wipe the hard drive first? (currently linex os)

  Little girl had PC at College «friend installed Linex.» I now PC New Testament new XP install first remove the hard drive? (desired)

  Yes.

  Do you need help to make the installation and the subsequent update?  What type of installation media?

• Satellite C670-11 q clicking loud noise the HARD drive

  Hello!

  I helped my neighbor to find a new laptop and the entire installation and start-up.

  We ordered a C670-11 q and it works very well, theres just a nuisance.
  The drive made strong rattling noises, not as a dying or working drive. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  I don't know if this laptop has a shock sensor to do this? The laptop was flat on the table, and there where NO vibrations while she does. There are no clicks under load, but they occur randomly when walking to the idle or surf/write normal.

  I checked also save energy options and disabled to turn the disk, without help.
  Also, this seemed odd, because the clicks occur often several times in a row. But there is no doubt it more when running on the battery.

  I am running the BIOS and latest drivers in the area of support (as of yesterday).
  The disk is configured in performance mode, I'm testing battery economy - should I?

  And no, the drive took a beating. I was the first person to turn it on.

  The drive is Hitachi, I don't run their analysis - no error.

  Any help is greatly appreciated: o)

  > The drive makes some noises clicking on, not as a dying drive or work. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  One of my computer portable HARD drive makes such noise too.

  I m not exactly why, but I also think that it is at the head of discs moving record position.

  However, I think that this is not really a malfunction since the laptop works pretty well and I didn't notice any problems with the HARD drive or files but I have created a backup of my files, just to be sure that you know
  I think you should save the date just to be sure

• Should media be copied on the hard drive first?

  Came today houses a few complaints of my wife on the problems with PE8 and discovered that, on my proposal, she took the card from the camera flash, put it in our reader of USB and any media files directly from there (rather than through the USB cable to the camera, as we have done for years).

  She used the command get the media, but it seems that get the media does not copy the original hard disk first, as I try to do to get the media. Can't blame him or any other user; Get sounds of media as it is the right think to click, and the images come right into the system...

  She began to make a nice slideshow with music and did a great job, until the preview window has stopped changing with the audio - I can rub, but as soon as I try playback the picture in the right preview window freezes but the sound continues to play.

  I unplugged the USB media player and, of course, the project could not find the media. It is disappointing that 'Get media' did not get the media out of the map at all. If we had taken the lead and erased and re-used the map, the media would be gone forever!

  More disappointing, now there is no reading on ALL the projects that we have, even those that have been conducted successfully with completely different media that is on the hard drive.

  Then, media must be copied manually on the hard disk before you use the command get the media to align with the project and/or the Organizer?

  And if so, is that not stupid enough? I've gotta be something missing here...

  Transfer of files to a card, or the camera HDD (hard drive) and get the media are two completely separate operations. Let me explain:

  When you transfer the files from the source to your system, you make a copy of these files on your system HARD drive. THEN, when get you the media, you are linking only the editing program (NLE) to your project. If they are still on the disk HARD of the camera or flash card, or similar, and you unplug the appliance or remove the Middle, these links are broken.

  It's exactly the same thing, when using an external HARD disk. Files are not automatically copied to the internal HARD drive, but are related to the external HARD drive. Unplug the external and pre cannot locate files. It would be the same if we put onto a DVD and then linked to files on this disc. Remove the disc, and the links will be broken. Copy these files on and THEN link to them, and as long as you do not move or delete these files, the links work.

  This ARTICLE will give you some information about what is in the project file (.) PREL). There is NO media inside those, only links.

  Hope this helps and also explains the differences between first copy and then by linking and just a link to the files.

  Good luck

  Hunt

• Satellite U205-S5002: cannot retrieve the Express Media Player after upgrading the HARD drive

  So I bought just a new Toshiba Satellite U205-S5002 I love it. One of the great features that interest me was the Express Media Player feature.

  My first step was to upgrade the hard disk and 160 GB and 2 GB ram.
  I placed the disk and ram in my old laptop and sold it.

  Before that I did, I made a copy ghosts and ghost of the hard drive to the new drive. Well come to find out...

  Toshiba is not provided with this software preinstalled, so I followed the instructions to burn my recovery disk Express Media Player and the boot on the new disk.
  So this is where the saga begins...

  After 15-20 seconds, I get a soothing blue screen (NOT of blue BSOD you mind) who says:

  /!\
  An error occurred during the recovery of "Express Media Player".
  -------------------------------------------------------
  Please pick up the image again from the beginning.
  Press any key to exit.

  It is typed exactly as it is on the screen. So, I see some other forums saying: you must have the free space of the disk so I resize the partition that allows 200 MB of space. Always the same... then try 2 GB even... then the 50 GB, same problem...

  OK, so obviously not a question of space. I read while I might need to erase the drive... so I delete the partition, this same error... then I run the recovery disk and tell him to wipe the drive, wait 1 1/2 hour, it ends. No dice! So I decide... ok... Well lets try another disk... I have restored my ghost image... and burned the image again... same question... so I decide to the recovery disk and I'll try to reinstall windows in the factory and make a record...

  Well, it does not work as well as you think... the image is incomplete... windows works fine... but the c:\Toshiba\ExpressMediaPlayer folder is empty!

  I'm happy that I have ghosts my original directory. But I decide allows to Express Media Player a shot more now that I have restored to factory... always the same error... I then decide a trial more... I'll erase drive 1.5 hours, I'll restore from toshiba dvd provided but leaving plenty of space at the end 2 GB (I have a lot about people who tell you to base just around 200 MB)

  5 hours later... moment of truth... Well Yes you guessed it... I don't know anything else to try... I have a bad image?
  You need one that I can download what has worked for them for sure? Or have - I have completely found myself by replacing the HDD with after market and which is originally a kind of compatibility issue?

  Thank you in advance.
  Gabe at supergeekz dot com

  Hello

  It s a great story!
  I put t know how to start so maybe first some info on the Express media player.

  As you said, and has already proposed the Express media player has been preinstalled on the second partition.
  If you want to install this media Express on the HARD disk drive, 150-200 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated.
  To get these free space on the HARD disk, 3 third-party products should be used as for example the Partitions Magic 8!

  I'm not going to write a story how to recover the Express media player because Toshiba has already created useful documents, which described complete installation!
  I found these documents in the knowledge base of computer Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

  * Check this box: *.

  [Why Express Media Player fails to run after replacing HARD drive or recovery? | http://support.Toshiba-tro.de/KB0/FAQ5C018T000FR01.htm]

  [How to recover a laptop Expert Mode with 2 Partitions and Express Media Player? | http://support.Toshiba-tro.de/KB0/TSB58014O0008R01.htm]

  Hope I could help you.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Keep the dng or CR2 files when switching from Lightroom and Photoshop.

  From Lightroom and Photoshop, how can I keep the dng or CR2 files. Now it changes the psd and when I return to Lightroom it removes options in the section of Calibration of the camera, so that while I have a choice (Adobe Standard/camera faithful), after returning from Photoshop file I have "Embedded." How can I keep the dng or CR2 files

  Adding to the good advice of Alfred - a raw file cannot be registered as the other files.

  Its only use is the basis for the creation of new files, which must be regular files, such as tiff, psd or jpg.

  When you edit a raw file in Lightroom, it does not change the file, the changes are written to the catalog.

  Optionally, save the changes in the form of metadata (xmp) sidecar files, or in the case of DNG in the file itself.

• I'm telling my legal copy of Indesign CS adobe @, but tells me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under the terms of the license, I could put on my laptop and keep

  I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?

  It won't matter because your copy of CS2 and serial number no longer works.  You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period.  The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• C55 - A satellite - keep Windows after changing the HARD drive?

  Hello

  I want to buy Toshiba Satellite C55 - A, which is pre-installed Windows 8.1 and the recovery on the HARD drive Partition.
  I also want to buy 256 GB SSD and put it in Toshiba (and use the external as hard drive from Toshiba HARD drive).

  Can I install Windows 8.1 that I bought (preinstalled) on the SSD?
  If so, how?

  Of course, you can swap the HARD drive with an SSD.
  The key is the recovery media (USB key or drive).
  You must create a recovery disk to replace the HARD drive.

  Laptop Toshiba computers are preinstalled with software called Toshiba Recovery Media creator.
  This allows you to create a recovery media that you can use to reinstall the system on the new SSD installed!

• Replaced the hard drive - now screen Intel Rapid Storage Tech comes first?

  A couple of weeks ago, I replaced the hard drive in my laptop Pavilion dm4-3090se with a 240 GB Samsung SSD (the laptop came with a 500 GB Hybrid HDD which is now my backup).

  Everything works fine, except when I first put it in, I get the screen shown in the image below and it takes a good 5 or 6 seconds before it closes and opens Windows. How can I make this screen go away?

  

  You are running Windows 7 or Windows 8? I see that you still have the installed cache acceleration mSATA 32 gig drive and it has the Intel Rapid Storage, just off acceleration partition. Can you find the control panel Intel Rapid Storage and reformatting the drive to 32 gig Accelerator? It will look something like this:

  

  I suggest also just remove acceleration 32 gig of hard drive. You have really no more. You can not acclerate a SSD and shouldn't do anyway since having a main SSD is still faster than having the accelerator. See page 44 of the Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine

  I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine
  and my windows update software no longer works. When I check the status of my activation of Windows 7 in the computer
  Properties, it is reported that Windows IS enabled. When I run the Windows activation repair tool it will fail
  and I get the following error messages: 0x80004fe21 and 0xC8000247. I also tried the Windows FixIt tools for
  activation and Windows Update without success.
  Please email me or call me with suggestions or PH 513-289-4785 thanks

  Tool Windows MGA results

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - B72VQ - G6RKT-G7B6M
  Windows product key hash: ISzyTLRWNXmB8 + BGCAyBkfJVOE0 =
  Windows product ID: 00359-OEM-9804563-10468
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {47CDEE04-15E7-4393-823C-9F19163CCB88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.110408 - 1633
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {47CDEE04-15E7-4393-823C-9F19163CCB88}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-G7B6M00359-OEM-9804563-104688S-1-5-21-4105253140-3248553093-608739849ASUSTeK Computer Inc.        UL80VT American Megatrends Inc.. 214 20110117000000.000000 + 00061B83607018400F804090409Eastern Standard Time(GMT-05:00)03_ASUS_portable100100Microsoft Office Enterprise 2007129AF2C442EAD0F143bTpphlGMO63Fl + N/RWz9H3zae4 =81599-906-1700076-651751100Microsoft Office system 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-045-610468-02-1033-7600.0000-3172012
  Installation ID: 104731195014616722429474505736359264920732256592507294
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: G7B6M
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 28/11/2012-09:54:21

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 11:22:2012 12:30
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFyGfz73n8sErBkTCA4/HhDcKpGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1150 011711 APIC
  FACP 011711 FACP1150
  DBGP 011711 DBGP1150
  HPET 011711 OEMHPET
  START 011711 BOOT1150
  MCFG 011711 OEMMCFG
  SLIC _ASUS_ Notebook
  CO-SUBMISSION 011711 OEMECDT
  LASRYVITRAGE 011711 OEMB1150
  GSCI 011711 GMCHSCI
  SSDT PmRef CpuPm

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• The hard drive of my computer has been changed. I need to re - install my Adobe CS 6, YET CS 6 owner. And Adobe CC as well. Can someone give me easy and a full link for that? I want to install CS 6 first.

  The hard drive of my computer has been changed. I need to re - install my Adobe CS 6, YET CS 6 owner. And Adobe CC as well. Can someone give me easy and a full link for that? I want to install CS 6 and again first. CC later. When to change previous hard drive, I help someone giving a full link for CS6.

  Hello

  Please find the links below:

  Download Creative Suite 6 applications

  Creative cloud to desktop

  You can also see How to download, install and activate Adobe applications

  Hope that helps!

  Kind regards

  Sheena

• Can I remove photos from photos on the hard drive of my macbook, but keep them in iCloud?

  I just used icloud to "backup" 80 GB of photos that are on the hard drive of my macbook. I'm now able to remove them from my macbook without losing them on iCloud?

  All advice appreciated!

  Welcome to the Apple community.

  With iCloud library enabled, you cannot delete a photo on a device (or iCloud.com) without deleting each device which uses iCloud photo library (iCloud.com). In order to save space on your mobile devices (and indeed your Mac if you want to) turn on the optimization of the pictures on these devices (settings > photos & camera > optimize storage on your mobile device and Photo preferences > optimize storage on your Mac)

  Dynamic optimization, it reduces the resolution of your photos, if necessary, so that you don't notice it occurring initially. However, when necessary, it is very effective, and users have reported libraries being optimized for much less than 10% of their original size in some cases. My own library is about 9% of its original on my phone size.

• HP personal media drive hp0000: remove the hard drive from the external area.

  My external hard drive does not work and I would like to remove the drive from the external hard drive case.  How to open the short cut through the plastic box?  I have other cases of emjpty for the hard drive.

  Access to the internal hard drive: methods and variants

  (1) open the support HP Pocket Drive is as simple as peel back label hardened plastic on the end of usb connection and to extract both little phillip screws hidden. Once the removed screws the drive carrier will slide on the front of the case and the hard drive can be easily replaced.

  (2) the same video

  (3) it is very easy to detach. With a small flat screwdriver take the label on the back cover. This will reveal the 2 small Phillips head screw. Remove them and gently pull the back cover. Then gently push all inside the well hard drive that forward into the aluminum housing. Careful not to push the reader through the case and on the floor.