First sync Cisco problem

Similar Questions

• HP first app - a problem of circle geometry

  Here's a problem for a graphical solution for (using the Geometery application):

  Given a unit circle, finding another circle that is framed by the axii unit circle and x and y.

  I tried to use the features in the application, but either I could not find the means to compel the circle (as with the two tangents and circle) or through indirect and mistakes means (on the resolution of the crossroads, etc.).  I thought I had it almost with the following definitions is entered in the symbolic view:

  

  I actually had to cheat and understand I and J with Algebra first here then place exactly (since I can't force things as I want)

  However, when I draw it, the GK circle is not visible! (?), as shown below

  

  The new circle must have been touching points H, I and J.

  I also tried to generate a horizontal line at point I using plotfunc (computer (GI)) and trying to intersect with x = line is but the calculator gave a bunc of errors.

  I found the Geo. App. a bit tempramental.  It seems that many times I have to find just the right way to get things to work (if that is the case).  Usually by then it would have been quicker to do it by hand on graph paper.

  Anyway, why no smaller circle of the solution and how could I have do more easily in the application?

  It worked, thanks!

  I guess it was confused (which I don't think it should have been) on the double intersection of the line and the circle.

  I of course didn't know this third option with inter () - this isn't in the help!

• Sorting the rows in the table based on the first character - speed-problem

  Hello

  I have a text file with a lot of lines. The file is imported into LV, and must be sorted by the first character.

  It works very well, but gets very slow lines if too.

  If 40,000 lines then take 0. 2 s.

  If 400,000 lines then the time rises with factor 100 in 25 years.

  If 1,000,000 lines then the weather is dry 222 (~ 4 min)

  Attached is the code which sorts a table to text.

  The number of lines can be set with the meter of the loop (Loop-counter * 4 = NumberOfLines)

  The elapsed time is displayed.

  How to speed this up? (Or check the more linear time number of rows)

  Thank you

  

  You can try something like that. If you treat a table line by line, you end up taking a lot of time.

  

  Sorry I have a problem of fixing of the VI.

• External DVD drive as first boot option problem!

  Yesterday, I got my Lenovo s10e and as it doesn't have a DVD rom, I bought a DVD burner external Liteon.

  It was installed automatically when I connected via USB. OK, it works very well with windows installed on my netbook.

  However, I can't solve a problem!

  When I chose USB DVD/CD as first boot option in the boot menu (Setup), it does not work! Boot sequence, I changed several times, but all in vain!

  The strange question is when I insert a cool drive with a bootable software, it works very well except for my DVD burner!

  I contacted Lenovo after the sale, they said because my DVD Recorder connects to the netbook through USB, it is not detectable.

  So, what should I do?

  
  

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• BlackBerry Media Sync Smartphone problem

  I have problems with the new Desktop Software 6 and Media Sync.  Instead of pulling up to my iTunes info, it seems to be pulling up all the music on my whole computer.

  I saw two other threads marked "resolved" that are not.  Blackberry simply denigrated for not having a contract with iTunes, which is not the case if you have the .m4a instead of .m4p files.  A saying that you can also download Media Sync 5 has already been removed from the Web site.

  I am running Windows 7, Blackberry 4.5.0.169 software and iTunes 10.0.1.22.  They are all the latest versions.

  Someone found a real solution to this yet?

  PS-

  BlackBerry: I have already ordered two Torches at AT & T for when my Alltel service goes to them in January, but will certainly Cancel if I can't sync that I used to.  Might as well get an iPhone in this case.

  It uses Windows Media Player by default?  It supports both. Sometimes, Media Player indexes all of your music and Media Sync allows to detect that it has more songs than iTunes by default so it.

  You can change this in the menu device, device, media, music Source Options.

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• CS6 first Pro installation problem

  I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

  

  I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

  It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

  Bryson,

  You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

  Thank you

  Kevin

• Broadcasting subtitles/captions position changes after the backup. subtitle, first pro cc problem

  Hello

  I'm working on first pro CC 2015.3.

  I put subtitles on my support.

  I choose to put down to the center using the small box (with 9 positions) but when I save the file, subtitltes position change a bit and they are no more in the Center. Sometimes a small portion of the text is off the screen.

  THX (and sorry for my English)

  Hello

  I work on first pro 2015 cc.3

  I added sub titles on my video.

  I put some money down en title centered to the screen with the help of the box with 9 automatic positions.

  At the beginning it works and when I save and reopen the file, the sub titles have moved and are are shifted. Some of the text is even outside the screen.

  Thank you for your help.

  Hello

  I got the solution. It is resolution safe or secure portal.

  I put the solution if anyone ever need.

  Your captions or subtitles may not exceed your security door or gate ground track. You need to reduce the font size or move to another line to shorten. Because first changes automatically position if it s more limit.

  However, if you want to be on these limits (ground/door chest) you can set with the scale and the effect of the track position.

  Hello again I found the solution.

  Solution alone, I share you although I think qe I must be the only jerk for not thinking about it.

  The problem comes from the ground and safe door car first pro will automatically substitute the captioning at best pour in stay standards.

  Possible solutions

  -in the absence of strike reduced the size of the

  -make line breaks.

  -Play with the scale effect parameters and positions of the captioning.

• First 12 items, problem installing & running under windows 10.

  First 12 elements suite works well when I upgraded to windows 7 to 10.  Having started with a fresh install of Windows 10 I can't get the first of 12 items to install and run.  Through the installation to the extent of the screen "sign necessary" after which the 'loading exporter AVI.pm"appeared and it became so insensitive.  When you try to run the Premiere Elements subsequently the "Organizer" seems to work but the video editor does not meet the 'New project' or 'existing project.  I had the same result with the copy on the CD and the last Premiere Elements downloaded from the Web site.  Someone at - it ideas?

  After further investigation, I have established that it is a problem with the Codecs so I'll search the forum by the way.

• First and other problems of Adobe software with administrator privileges

  This question has been irritates me for some time. I have a Setup Administrator account on my PC. Everything works well except adobe software, namely CC 2015. First pro 2014 still works perfectly without any problems, but I want to really go ahead and use of here in 2015 and all it's features. Here is a list of questions:

  • Premiere Pro 2015.2 CC will not launch unless in administrator mode. Then I lose access to networked drives.  Several accidents with data apphang like this:

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: Adobe first Pro.exe

  Application version: 9.2.0.41

  Application timestamp: 56a208c9

  Signature block: fb1f

  Blocking type: 134217728

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Signing of additional blocking 1: fb1f37ed2ffcf1948fda47e79e9edb85

  Signing of additional blocking 2: ae47

  Signing of additional blocking 3: ae474e9d12e06844d7666cfd339e5acd

  Signing of additional blocking 4: fb1f

  Signing of additional blocking 5: fb1f37ed2ffcf1948fda47e79e9edb85

  Signing of additional blocking 6: ae47

  Signing of additional blocking 7: ae474e9d12e06844d7666cfd339e5acd

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=280262

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  • Illustrator sets out the problems when you try to close. Crashes.
  • InDesign won't open except in administrator mode. Also crashes when closing.
  • I even tried running GPUSNIFFER. EXE to see if it would work. It worked only when ran as administrator.

  It seems that it is a problem of user account, but my account IS an administrator account

  Any help appreciated.

  Data sheet:

  8.1 Windows 64 bit (Version 6.3 Build 9600)

  I7 - 4790K @4 GHZ

  32GB mem

  4 x 3 TB HARD RAID10 WD Black drive

  nVidia GeForce GTX 970-4 GB - pilot 364.72

  Installation of the monitor (1920 x 1080) double

  ASUS Xonar Essence STX

  See you soon!

  SOLUTION! My windows account has an account online from Microsoft. I switched it to a local account and the turn is played. Everything works perfectly without switching to "Run as Administrator". I recommend to all the use of adobe software to work on a local windows user (and admin of course).

• First Elements 10 problem!

  Hello! I have a problem with my first 10 elements. I'll post a photo to clearify the problem.

  So I try to make a video with lots of little video clips. All the clips are in the same format, mpeg. Almost all the files work correctly except for a few, and they are always the same, all tho of course with another video... As I see it seems to be completely random, some fail and some work... I have still the audio on each clip, but I get the green screen on some of them... And once a clip like that it stays that way... BTW, sorry if the English is bad... All my files are saved in a computer game, im using Nvidia Shadowplay. Someone met before, or has any idea what the cause? How can I solve this problem?

  And Yes by the way, I have 10 windows, I don't seem to matter when I had windows 8, same problem... I'm also a really good computer then has nothing to do with this... The computer can manage information, storage, all sizes of files etc... its young.

  Hope I can get a good answer on this basis, feels little sad to buy another program to fix it.

  Thank you very much for taking the time to read this hope for some pros of creation.

  Best regards, Rasmus

  Convert the mp4 with HandBrake contstant framerate and re-import.

• Hello, I have for my reactivation of an Adobe first Element 9 problem

  Hello

  I reset my computer, and I can't reactivate my product. In fact it is still registered with you, and I can't do the reactivated.

  I need a new reactivation code. Because I can't use my product.

  Thanks for helping me solve my problem. Greetings

  F.Bardet [email protected]

  First is no items not part of the cloud, I propose that on this forum... MOD

  First elements Forum http://forums.Adobe.com/community/premiere_elements

  Serial number and activation support (non-CC) https://forums.Adobe.com/thread/2041990

  JazzHot

  This isn't Adobe. Instead essentially a user to user forum. Your son is currently in the Adobe Premiere elements Forum.

  I've never seen, recording is not the same as product activation (requiring a purchased serial number), although the two are often held at the same time.

  You need to deal with what you have - a number series bought and installation files or installation disk. Since you first Elements 9, you are far beyond any guarantee for the product which is now within 14 days of purchase from Adobe directly for download.

  It seems to me that you see would include trying to resolve your situation through the usual exercise...

  1 are you sure that the serial number you are using? Is the serial number that you are using display with your product in your account on the Adobe website?

  2. remote do you have in the first elements 9.0 install? A uninstall you / free ccleaner Cross (regular and register cleaner parts), reinstall it with antivirus and firewall disabled? Have you included the 9.0.1 download and install. This can be done with the program closed.   For Windows Adobe - Premiere Elements: for Windows: Premiere Elements 9.0.1 update

  3. you run programs as an administrator (from account user with administrative privileges)?

  You have the latest version of QuickTime installed on your computer, what operating system... If Windows 10, then Windows 7 bit, 8 or 8.1 64 7.7.6... if QuickTIme and QuickTime 7.7.8.

  4. the video graphics card is up to date according to the web site of the manufacturer of the card? Sometimes a day card is not enough, then deleting the file BadDrivers.txt could be a life saver.

  Please consider.

  RTA

• Installation of first pro cc / problem

  I'm trying to download a cc pro first trial through creative cloud I

  having a problem, the software is supposed to be installed programs and software, but

  usually not in the computer, I tried to delete it shows an error I found

  on Adobe tools to remove yours and I took off, one experimental program to another

  lowered well managed, rather than has encountered a problem, I have a windows operating

  7 and 32-bit system

  I'd be happy to fix the problem

  Thank you

  Please check the system requirements for | Adobe Premiere Pro.

• Flashing image ghost on first Pro CC problem

  Good, everyone. Hope you can help me with this, since I am running out of ideas. Could not find discussions with the same problem as mine.

  I have a 1080 p short film shot on 2 different cameras Nikon D5100. I use first Pro CC, and some free LUTs I found online for the color correction (WARM2 ORIG/DARK Kino37 and GC_Reign_R36_709) on most of the scenes, which pourraient be the ones causing the glitch. Some have a brightness and contrast twisted slightly because the original film was too bright.

  I made the video by pressing the Enter key to make it play smoothly while I worked on it. The film lasts about 21 minutes, and after the first 2 minutes, the video began to Tickle/flashing, as if the light was changed image by image. I had to change a few things so that the video would be a new rendering itself and, after many hours, I managed to do work perfectly when I play it on the first.

  However, when I export the video, the problem is still there - except this time, instead of finding problems with the changing light, there is a ghost image blinking (one of the managers of the flashing video with a lower opacity) right on minute 4. I deleted the exported video before I remembered, I should have taken a screenshot to explain the problem. Stupid choice, I know.

  I tried the two H264. MP4 and Quicktime. MOV and still no luck. Video always plays very well inside the first, however. Speculate about what I could do to fix this?

  I guess this movie must be haunted...

  Hello Ignacio,

  Have you tried to export via Media Encoder? Have you tried to export without the lut to check if they are causing this issue? Have you tried to clean the media cache files? Have you tried to remove the preview files?

  Thank you

  Regalo