CS6 first Pro installation problem

Similar Questions

• Attempt to run CS6 first pro: Configuration error, please uninstall and reinstall the product, error: 1

  So I installed CS6 on my Z210 Windows 7 workstation. But when I go to open half of the programs, in particular first Pro I get this message...

  Configuration error

  Please uninstall and reinstall the product.

  If this problem persists, contact Adobe technical support for assistance, and
  mention the error code displayed at the bottom of this screen.

  Error: 1

  http://www.Adobe.com/support/

  I could really use some help here. What really gets me, is apparently the Adobe customer service does not all calls. Are you kidding me?
  Any help would be greatly appreciated.
  I found a similar situation here on this forum, but I still have questions:
   
  http://www.techyv.com/questions/Adobe-Photoshop-CS6-error-code-1

  Hello

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  If the problem persists, you can start the computer in a clean boot state, and then try to install the program.

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us informed if you need help.

• Import with first Pro CC problems

  Imports of the DSLR footage with audio only in first Pro CC and CC prelude but normally import into Premiere Pro CS6

  Try this:

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• Broadcasting subtitles/captions position changes after the backup. subtitle, first pro cc problem

  Hello

  I'm working on first pro CC 2015.3.

  I put subtitles on my support.

  I choose to put down to the center using the small box (with 9 positions) but when I save the file, subtitltes position change a bit and they are no more in the Center. Sometimes a small portion of the text is off the screen.

  THX (and sorry for my English)

  Hello

  I work on first pro 2015 cc.3

  I added sub titles on my video.

  I put some money down en title centered to the screen with the help of the box with 9 automatic positions.

  At the beginning it works and when I save and reopen the file, the sub titles have moved and are are shifted. Some of the text is even outside the screen.

  Thank you for your help.

  Hello

  I got the solution. It is resolution safe or secure portal.

  I put the solution if anyone ever need.

  Your captions or subtitles may not exceed your security door or gate ground track. You need to reduce the font size or move to another line to shorten. Because first changes automatically position if it s more limit.

  However, if you want to be on these limits (ground/door chest) you can set with the scale and the effect of the track position.

  Hello again I found the solution.

  Solution alone, I share you although I think qe I must be the only jerk for not thinking about it.

  The problem comes from the ground and safe door car first pro will automatically substitute the captioning at best pour in stay standards.

  Possible solutions

  -in the absence of strike reduced the size of the

  -make line breaks.

  -Play with the scale effect parameters and positions of the captioning.

• Flashing image ghost on first Pro CC problem

  Good, everyone. Hope you can help me with this, since I am running out of ideas. Could not find discussions with the same problem as mine.

  I have a 1080 p short film shot on 2 different cameras Nikon D5100. I use first Pro CC, and some free LUTs I found online for the color correction (WARM2 ORIG/DARK Kino37 and GC_Reign_R36_709) on most of the scenes, which pourraient be the ones causing the glitch. Some have a brightness and contrast twisted slightly because the original film was too bright.

  I made the video by pressing the Enter key to make it play smoothly while I worked on it. The film lasts about 21 minutes, and after the first 2 minutes, the video began to Tickle/flashing, as if the light was changed image by image. I had to change a few things so that the video would be a new rendering itself and, after many hours, I managed to do work perfectly when I play it on the first.

  However, when I export the video, the problem is still there - except this time, instead of finding problems with the changing light, there is a ghost image blinking (one of the managers of the flashing video with a lower opacity) right on minute 4. I deleted the exported video before I remembered, I should have taken a screenshot to explain the problem. Stupid choice, I know.

  I tried the two H264. MP4 and Quicktime. MOV and still no luck. Video always plays very well inside the first, however. Speculate about what I could do to fix this?

  I guess this movie must be haunted...

  Hello Ignacio,

  Have you tried to export via Media Encoder? Have you tried to export without the lut to check if they are causing this issue? Have you tried to clean the media cache files? Have you tried to remove the preview files?

  Thank you

  Regalo

• Mixture of Framerates in first Pro CC - problem

  Hey guys, hopefully get you some advice for me,

  I've been on vacation and we had different cameras to record everything. Everything is shot in 1080 p but the framerate is different. GoPro stuff is shot at 60 p (for the ability to do a slow motion later), and my plans of GH3 is turned usually 50 p (same reason). I know that the errors I did by choosing the same display every time rate. But now I have the problem, that I want to do a project in first Pro CC where I use each item in the same sequence.

  I thought 25 p is the best choice, if I have the opportunity to play excerpts from 50 p in slow motion (with interpreted as 25 p). Can I just insert the 60 p clips? When I intepretate the 25 p clips, they are all, of course, idling. To make them 'direct movement' I must speed up to 220% or sth. Like this. Isn't that create the same problems?

  As you can see I'm a bit confused, if something could help me, really. Is it possible to use each clip in 'direct movement' and, if necessary, slow down some clips without having any problems with images/jump, stuttering and stuff like that?

  Alex

  In most cases, there is no need to interpret the film allows you to adjust the frame rate. First will adjust automatically for clips with different rates, as explained on this page for help: Help for Adobe Premiere Pro | Adding clips to sequences (a search on 'mixed frame rate' me, he got in a jiffy.)

  Here's the paragraph:

  Mixture of element types in a sequence

  You can mix clips with different rates, frame elongation and sizes of images in the same order. For example, if you drop an HD clip in a sequence in an SD project, the clip will be letter-boxed and scaled to the size of the SD image automatically. Similarly, if you drop a SD clip in a sequence of an HD project, the clip will be in pillar boxed automatically.

• Adobe first pro opening problems

  I want to install Adobe premiere pro and when I did, it takes a lot, but well... then all the world has a button that says open but I Don t and I can´t find any where, but a photo I opened can´t. What should I do?

  check c > program files > adobe > adobe first pro cc 2015, assuming that it was the cc version 2015 you have installed.

• First Pro installation

  First Pro does not appear in my Adobe Download Manager, so how can I install it.

  If AAM does not show it, your system supports no-all video applications require a 64-bit operating system. Read the specifications of the system.

  Mylenium

• Installation of first pro cc / problem

  I'm trying to download a cc pro first trial through creative cloud I

  having a problem, the software is supposed to be installed programs and software, but

  usually not in the computer, I tried to delete it shows an error I found

  on Adobe tools to remove yours and I took off, one experimental program to another

  lowered well managed, rather than has encountered a problem, I have a windows operating

  7 and 32-bit system

  I'd be happy to fix the problem

  Thank you

  Please check the system requirements for | Adobe Premiere Pro.

• CS6 on Win10 installation problem - says another installer running and should be stopped

  I downloaded files for CS6 Design and Web Premium (it was well before the purchase of cloud) replacement on computer where Windows 10.  I clicked on the Setup icon, and he told me another installer is running and must be closed.  Can't find it.  Rebooted computer and click on Setup.  He has passed the point of wondering what elements of the Suite I want to install and start the installation, but leaves with the error DW069: an other MSI Installation is underway. and the message above on another installation program runs and must be closed.

  What should I do?

  Thanks for any help.

  Press Ctrl-Alt-Del and select Task Manager to see what is actually being run

  Also...

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Transition constant Gain in first Pro CC problem

  If I apply this transition at the beginning of a track audio clip/musical, it produces to irritate his before his real or final music out put. This never happened in first CS6. I made a final product in H264 & MPEG2 for broadcast and DVD & Bluray formats. Weather I have directly export first, through the media encoder problem is still remains the same. Let me know if you need more information. Thank you!

  Hi Martin,

  See a possible solution in this thread: http://forums.adobe.com/message/5997457#5997457

  Thank you
  Kevin

• With hp LaserJet MFP M125nw Pro installation problem

  I have a problem with you reinstall the drivers from the printer in the address for Windows 7, in fact, when I start the installation disk all goes well until the collection of data on the site of the installation, when it comes to 99% seem to me a serious error without explanation (PC recognizes the printer when it is connected). I tried several times to install, but in vain. I even disabled the antivirus but still nothing?
  Help, please

  Thanks for providing the screen shot @Pisinoto.

  If you disconnect the USB cable, two entries 'HP Printer' disappear?

  If they do then the printer is partially recognized.

  Reconnect the USB cable and remove the two entries.

  Then disconnect the cable once again, please.

  Try another USB cable if you have an extra one lying around, just to rule out it. Make sure you are connecting directly to the computer.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
  
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.

  Keep me posted. Thank you!

• First Pro installation; OS 32-bit / 64-bit

  Is there a way I could install Premiere Pro if my OS is 32-bit? Otherwise, I can pass it to 64, or what I need to do a fresh install of it?

  Premiere Pro has required an OS 64 bit for CS5.

  To the best of my knowledge, it cannot move from a 32-bit to a 64 bit OS OS.  It will take a new installation.

• XI of Acrobat Pro installation problem

  I uninstalled Pro XI because I had problems with it and when I tried to download again using the CC desktop Downloader it is that I installed it again but do not. Help, please.

  Hi Jenn,

  Because we cannot see the information relating to the operating system, so I'll share the two links with you.

  If you are on a windows machine, please use the tool of cleanup for Acrobat XI from this link: http://labs.adobe.com/downloads/acrobatcleaner.html

  If in case, you are on a Mac, please use this link to install the creative cloud cleaning tool and uninstall / Clean Acrobat using this tool: http://www.adobe.com/support/contact/cscleanertool.html

  Please let us know if it worked for you or not.

  See you soon,.

  Michael Sharma

• Acrobat 9 Pro installation problems

  I tried to install Acrobat 9 Pro from disc, but it keeps failing as my laptop (Dell Studio 17) does not appear to be an application from that will recognize the disk data1.cab.  He is down on a dozen attempts over 3 days!  Have also tried to copy the contents of the disc to my hard drive and install from there (and administrator), but same problem. There is an exclusive excerpt of program I need?

  BTW, I get the error message as follows: "error 1305. Error reading from file D:\AdobeAcrobat9Pro\Data1.cab.  Check that the file exists and that you can access.

  Martin

  Thanks for the reply.  In the end, after several attempts (failed), I took the disc and my laptop to my local computer store friendly and he tried to install the software from the disc on many of its computers - also without success.  We arrived at the conclusion that the disc has been damaged (he had arrived with several small scratches) and I asked the seller a refund, which he gave me.  I have since bought the software from another source and installed without difficulty.