RAM not work DDR3L 4 GB HP Pavilion 15 - n245se

Similar Questions

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• Pavilion p7 - 1226 s: card Nvidia GT 710 does not work with the P7-1226 Pavilion

  I installed a graphics card from EVGA Nvidia GT 710 in my Pavilion p7 - 1226, and when I turned on the PC, he remained at the HP splash screen and all does not load more. It would also give a single beep every so often. I can not enter the Boot Options by pressing ESC. I removed the card and the PC worked fine again. I checked the card before removing it and it has been installed.

  I had already installed a 430W power supply, so power in watts is not the issue.

  I have studied the issue online, and it seems that the problem may be with the motherboard of the PC HP (IPISB-CU), not the card. Can someone tell me how to get this card to work with this PC, please?

  Thank you!

  SJTemp, welcome to the forum.

  The GT 730 graphics card requires UEFI in the motherboard instead of a standard BIOS / Legacy.  HP didn't start using UEFI until mid-October 2012.  There is no way to upgrade the BIOS in the UEFI.  I suggest you to contact EVGA Tech Support (1-888-881-3842) to see that if they can help you make the card work.  Otherwise, who needs no UEFI cards of the GT 640.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• But Bluetooth does not work on Realtek RTL8188CEB8 on Pavilion g7-2275dx

  My G7 did not support the bluetooth so I got half of the bgn/bluetooth mini-pci Realtek card and installed.   I installed the drivers from the web site of Realtek for Windows 8.

  The adapter works for wifi, fine and in the Device Manager, the generic Bluetooth adapter appears under bluetooth, and under network adapters, it shows the Realtek PCIe Familyh and controller Realtek RTL8188ce bgn.  In the past, he has shown 2 other bluetooth devices (now it shows a failure on the generic adapter) but no matter what, there is no switch in the network control panels to turn on bluetooth, bluetooth all attempts fail - the device cannot be discovered, and it can find others.

  Any thoughts on how to get BT running on this system in Windows 8?

  You are the very welcome.

• Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

  Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

  Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

  Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.

• eMachines EL1850 new RAM not working not

  Hello everyone!

  I wanted to upgrade RAM from 2 GB to 4 GB, so I looked at the label placed on the current RAM and tried to find the best match. I bought and tried 1 x 2 GB Kingston and 2 x 2 GB Corsair (more), but unfortunately none of them worked. After installation and turn on the PC, it was a constant noise for a long time and I couldn't do anything. Nothing on the screen. Then I tried one at a time into the two slots with the same result.

  What's wrong? What I am doing wrong?

  Thanks in advance for your time and help!

  The current RAM:

  UNIFOSA 2 GB GDDR3 - 1333 128MX8 1.5V EP, GU512303EP0202

  I tried (all new) RAM:

  Kingston 1 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

  Corsair 2 x 2 GB memory DDR3 1333 MHz Non - ECC, CL9, 1.5V, memory unbuffered DIMM (link)

  Motherboard: G41T-AD V: 1.0

  BIOS: P01. B3 (the latest version)

  Upgrades successfully achieved to date: replaced Intel Celeron E3400 with Intel Core 2 Duo E8500

  Fortunately, I found someone who was trying to sell the same Unifosa modules, 2 x 2 GB. They work perfectly!

  I want to thank all the people who have tried to help me!

• Pavilion HP E038tx bluetooth does not work

  Bluetooth is not working properly

  HP E038tx Pavilion

  Windows7 64 bit

  Hello:

  What model of wireless network card your laptop there?

• HP Pavilion 13-b221no: fn key does not work in Windows 8

  Hello!

  I just got a new laptop. The fn key does not work? I have Hp Pavilion 13-b221no and Windows 8.

  Help?

  I'm sorry to ask this same question frequently asked in the forums, but the answers and solutions have not worked on this...

  Thank you very much!

  Hello!

  It works! I followed the instructions in this video on YouTube:

  https://www.YouTube.com/watch?v=mIoDoyWMT0k

  I'm sure you have tried to explain this to me, but I just didn't understand haha... A big thank you!

• TX2500 microphone does not work

  My internal microphone does not work.

  Did not work since the beginning

  Pavilion TX2500

  Realtek High Definition Audio

  Driver is correctly installed and update is not necessary.

  Can someone help me?

  Reinstall the realtek driver even if the system indicates no update needed.

• HP Pavilion 11-n010 dx: Touch Screen NOT working after upgrading RAM

  I've recently updated the RAM on my HP Pavilion 2 in 1 portable from 4 GB to 8 GB and now the touchscreen does not work. I preformed a refresh on the PC when updgrading memory. Now, windows does mean no net or touch input is available. I updated and reinstalled the BIOS and this has not solved the problem. Any ideas?

  andrewstarr09 wrote:

  I solved the problem. I had to download the HP Support Assistant program again this orginially came with the PC. Downloaded once, I opened it and course and everything, but it was the new BIOS update that fixed I think. Anyway, the touchscreen works now. So if you do a refresh on 8.1 of Windows and your use of an HP product, Microsoft will remove most of the HP stuff and you have to reinstall them all yourself.

  It is good to hear that it works. In fact, Microsoft provides the touch screen driver, not HP. It is located in the directory DriverStore.

• Pavilion dv7 6166-nr: Synaptics TouchPad Enable/Disable light not working after upgrade to Windows 10

  TECHNICAL DATA:

  Name of the operating system Microsoft Windows 10 home
  Version 10.0.10240 Build 10240
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name SUZANNES-PC
  System manufacturer Hewlett-Packard
  System model HP Pavilion dv7 Notebook PC
  System Type x 64-based PC
  SKU LW473UA #ABA system
  Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
  Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
  SMBIOS Version 2.7
  Embedded Controller Version 51,24 by action
  BIOS Legacy Mode
  Baseboard manufacturer Hewlett-Packard
  Model baseboard is not available
  Name of plinth base
  Role Mobile platform
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "10.0.10240.16392".
  SUZANNES-PC\Suzanne username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 4.00 GB
  3.48 GB total physical memory
  2.03 GB available physical memory
  4.79 GB total virtual memory
  3.26 GB available virtual memory
  Page file space 1.31 GB
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  NEWS OF SYNAPTICS:

  Material Type Synaptics TouchPad SMBus
  Number buttons 0
  Status OK
  ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
  Supported no power management
  Double-click the threshold is not available
  Handedness is not available
  IRQ channel, IRQ 12
  Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)

  PROBLEM:

  The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work.  I was wondering if there is a way to fix this, or there's someone else with this problem.

  OK, this can be marked RESOLVED.

  I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!

• Hyper-V does not work on HP Pavilion notebook n210se

  Hello

  I just bought HP Pavilion notebook n210se and configurations are as follows:

  Intel 4th generation Corei5 4200 processor

  4 GB of Ram

  Windows 8.1 Pro

  Version of the BIOS F42

  I downloaded and installed all the latest drivers to date of the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=6762...

  I activated the option enable virtualization in the BIOS and after that when selected the options of Hyper-V features Trun power Windows and restart the computer, the machine hangs with a logo of HP.

  When I disabled the option of virtualization from the BIOS, machine started successfully. But it is mandatory for me to install Hyper-V that I am a Windows Phone 8.1 developer and I need to run emulator WP8 and it does not work without Hyper-V active.

  Please help me because it was the main purpose of buying this laptop.

  I have already read some forum messages and did a few steps as:

  1: Install the latest drivers for Ralink bluetooth device

  2: uninstall the Ralink bluetooth device

  3: device disabled bluetooth device manager Ralink

  But nothing has worked for me.

  A specially HP support person can help me? I'd really appreciate it.

  Thank you

  Zafar

  Hi Mrstenter,

  Thanks for your quick response. After searching tons of Web site, I found the following driver that worked for me.

  http://www.MediaTek.com/en/downloads/Bluetooth-driverrt3290mt7630/

  I hope it will be useful for others.

  I have another question, I am in pakistan can you just let me know what number should I have to call in the future if I get any problem?

  Thank you

  Zafar

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• Some signs do not work on my HP Pavilion G6

  Hi all

  Ive had a problem.

  Within the limits, I think only one week my laptop using a couple signs stops.

  Such as ' "' ^ ~."

  Please help me. I don't REALLY know how to fix it.

  Here's my laptop specs, if necessary:

  Laptop HP Pavilion G6

  Keyboard version: 09.4 B

  RAM: 4.00 GB

  Intel Core i5 - 2430 M CPU @ 2.40 GHz

  Windows 7 Edition Home Premium 64-bit

  Greetz,

  Bradley

  HI Bradleyornot,

  Welcome to the HP forum!

  I understand that shift key does not work properly. Here is therefore a document, I think that will help solve this problem. Computer laptop keyboard troubleshooting (Windows 7 ) There is also a top link to test the equipment. Answer please if you have any questions or concerns more.

• 2011 15 "Macbook pro more low ram slot machine does not work. 3 beeps every time I start up my Mac.

  Hey guys,.

  Then Ive met this weird problem with my mac. While I was using the Mac at work for like 4 hours without interruption and then when it was time to go home, I just put the screen down and put the Mac to sleep. When I opened the Mac at home, he started with 3 beeps and it wouldn't start.

  After having panic for like half an hour, so I decided to take google on this issue. I found many queries, but nothing like mine. So I opened the back panel of the Macbook, deleted the two Rams and re-sitting (like one of the posts on google said to do) twice but it still did not work. I took off the piston down and tried to turn on a single cylinder high and it worked.

  A bit of history, Apple had this quality control program where all 2011 Macbook pros affected by a defective video card can have their logic boards changed for free by taking it to apple. My macbook was one of them and apple genius guys changed the logic board. Long and behold, after six months the lower slot of Bank ram has stopped working. My question is, can I use the Apple since its only six months, and if I order a new Board of the logic on their part, what are the chances that this will not happen?

  Any past experiences you guys could share to help me would be greatly appreciated.

  Aqeel.J

  My question is, do I use with apple since its only been six months

  This is a user to user forum.  We are not employees of Apple.  Some users like you.  You will need to ask your question directly from the horses mouth.

  Call Apple Customer Relations - 1-800-275-2273.  Ask politely and firmly that you want to transfer to customer relationships.  Tell them exactly what you said in your post.  See what they can do for you!

  Good luck!

  If I order a new Board of the logic on their part, What are the chances that this will not happen?

  A good fortuneteller adventure can answer this one!  FWIW, I had mine replaced guarantee also that extended repair program had expired for FREE3 or 4 years ago.  My MBP 2008 is till going strong.