.fix files

Similar Questions

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• boot problems after "disk error-checking/control - automatically fix file system errors.

  I ran the two options 'check disk' after deleting some old programs and was prompted to restart. When it restarts it was all white screen, then I stop after waiting a few minutes using the power button. now it won't start at all - I have white screen and cannot even get into safe mode by pressing F8. white screen and the fan runs. I is not original boot CD, so tried a CD recovery Norton but would not start from that. I checked the monitor cables.

  It's a 2002 eveshamvale:
  Windows XP Home Edition Service Pack 3 (build 2600)
  Board: Gigabyte Technology Co., Ltd. 8ID533 1.x
  The bus clock: 100 MHz
  BIOS: Award Software International, Inc. 6.00 PG 11/11/2002

  would be grateful for any ideas.
  Thank you

  If you used the power switch, you can inadvertently damage your file system, so before wasting time to try a bunch of things, I could do this (or you may be wasting a lot of time to try things too):

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Help invisible fixing file trash should be removed, the file has grown exponentially and hard disk space.

  A few days ago, I deleted a file .mkv of the trash using CCleaner, as I usually do (this is my first problem with CCleaner). Although it seems as if the file was not successfully removed. Whenever I start Defraggler or CCleaner, I am aware of the file in question still exist on my hard drive, and as time has passed in the last days, the file has increased to exponenentially to the point that he can't because he filled my hard drive. Remember that this file, before I deleted it, was about 4 GB. It's somewhere in the region of 80 GB, I think. CCleaner can not delete it (although it is trying very hard), I tried to defrag it several times and I don't know what to do.

  According to Defraggler, the file is located in C:\$Recycle.Bin\S-1-5-21-1458822887-3216967547-306807193-1000\

  If anyone knows how I can remove this file from my hard drive, please let me know. Otherwise, I'll have to buy a new hard drive and move all the important data on it to the new.

  actually just fixed. solution was to allow C:\$Recycle.Bin be seen (with options of folders in the control panel), then went in, deleted the trash (excluding all files desktop.ini and other important files, windows prompts me not not to remove). Voila, basket rest, excluding the massive file that was found to have taken more than 170 GB in the end.

  very happy right now.

• Trying to fix Chkdsk from freezing to step 5 of 5 during a scan and trying to recover bad sectors and fixing file system errors

  On this afternoon, I ran chkdsk to check and recover bad sectors and solve the system files and then frozen at 43% on step 5 of 5. I left it on through the night and I went to school and came back, she was still at 43%. Then manually shut my computer and since I tried to solve the problem. It was the second time I ran chkdsk on this pc having windows 7 generally run chkdsk every month or so to make sure that everything works well. After that my problem is that I tried so many things that I ran spinrite, I reinstalled windows, I tried to run chkdsk on safe mode, I tried sfc/scannow, and chkdsk/p and all these things has not fixed the problem. CHKDSK/p was the only thing that does not even tried to fix anything because it says invalid parameter. Also when I reinstalled windows 7 on my pc then chkdksk froze to 49% on step 5 of 5.  I even ran diagnostics from the bios and I use Seagate Seatools and two diagnostics says my hard drive is perfectly fine. I also tried running chkdsk in windows 7 cd and for some reason any he completed in less than 2 hours. I then ran chkdsk from the pc and then it froze again it made me think that there must be something wrong with my pc. So I was wondering how can I get chkdsk to complete my PC again once instead of using the windows 7 cd every time.

  OK, here's the link to the article: Windows 7 - How to fix bad sectors reported by chkdsk
  http://www.PAGESTART.com/win7chkdskbs01.html

  First read and post any questions you may have before you start.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problem with ODI 11 g and width fixed files

  Hi all,

  I have a problem with a flat file with fixed length fields. I have reported all the correctly (it seems) and in the data preview, I see the correct data, unfortunately when I lounch my execution interface I get an error message saying that the size of the last filed is more than the declared. Looks like he is not able to understand the end of the recording is normal '0D0A '.

  And I also have another question, anyone knows why inside my ODI Desiner I see always the same file also if I try to change the data inside? What is a clearance problem or a bug? I forgot to set something up in a certain place?

  Thank you in advance.

  B.

  Could this be a problem with the last configuration of column length? Please refer to the files - 11 g Release 1 (11.1.1)

• [SOLVED] Help fixing 'file two systems with the same uuid were detected.

  I have a Setup ESXi embedded (installed on a USB key connected to the internal USB port) on a Dell T710 with few of the SAS drives.  I tried the upgrade to 4.0 - 294855 to 4.1 - 348481 by following the instructions here via:

  esxupdate--bundle=/vmfs/volumes/datastore_name/path/to/upgrade-from-esxi4.0-to-4.1-update01-348481.zip update

  Even if it is done correctly, when I restarted I got a purple screen with this message on this subject:

  The system has found a problem on your machine and cannot continue.

  Two systems with the same UUID files have been detected.  Make sure that you do not have two installations of ESXi.

  So, he tried to update one of the SAS drives internal versus inside USB key...?

  I studied this time before & found a threadwhere posted to help, but it wasn't enough to get me going.  Tonight, I found KB1035107 which details how to fix this, but I have a few concerns:

  • How can I identify the drive that has the invalid ESXi installation?
    
  • Better yet: How can I identify who / disc is the one with the ESXi installation I want to keep?
    
    • I know that I can use esxcfg-mpath-l., esxcfg-mpath-band esxcfg-scsidevs-l to collect the disk & LUN information.  But what happens if it wasn't a built-in installation?  If ESXi was installed on one of the SAS drives, how could I confirm which drive it actually installed on?
      
  • What is the worst that could happen with the performance he commands in the KB above?
    
    • Do I need to worry about migration whatever data is stored elsewhere there until I can get through this?
      

  Finally, and perhaps more important than these other issues:

  It is for me a way to specify which disk/drive/device to target when executing upgrades, more precisely from 4.0 to 4.1?

  How can I perform upgrades in the future without having to worry about this nonsense?  I don't want to have to disconnect from the LUN/warehouses of data whenever there is an upgrade (major or minor).

  
  Thank you very much.

  Did the HD with the data store show other partitions if your running fdisk-l?

• Formate LKM support of Oracle (TABLE EXTRENAL) data LENGTH FIXED files?

  Hi all
  
  I'm working on a simple test to create an external table using the "LKM to Oracle (TABLE EXTRENAL)" file to load a data file of fixed length (no separator/delimiter). After running, the error is as follows:
  
  2009-11-23 07:26:02 PM (DwgCmdExecutionThread): SnpSessTask.treatSqlException: 29913: 99999: java.sql.SQLException: ORA-29913: error in executing ODCIEXTTABLEOPEN legend
  ORA-29400: data cartridge error
  KUP-00554: error occurred when parsing the access settings
  KUP-01005: syntax error: found 'colon': expected an of: "asterisk, number.
  KUP-01007: in the column of the row 12 28
  
  java.sql.SQLException: ORA-29913: error in executing ODCIEXTTABLEOPEN legend
  ORA-29400: data cartridge error
  KUP-00554: error occurred when parsing the access settings
  KUP-01005: syntax error: found 'colon': expected an of: "asterisk, number.
  KUP-01007: in the column of the row 12 28
  
  
  The external table creation code generated is:
  
  «"createTblCmd = r»»»
  create the table ODI_WORK_SCHEMA. C$ _0PARTIAL_SHPT_TMP
  (
  C1_RECORD_TYPE VARCHAR2 (2),
  C2_ISN VARCHAR2 (8).
  C3_AWB_UID VARCHAR2 (11),
  C4_FLIGHT_ID VARCHAR2 (7).
  C5_FLIGHT_DATE VARCHAR2 (8).
  C6_AIRCRAFT_FLOW_TYPE VARCHAR2 (1).
  C7_PORT_CODE VARCHAR2 (3),
  C8_SHPT_BD_PIECES VARCHAR2 (5).
  C9_SHPT_BD_WEIGHT VARCHAR2 (9).
  C10_SHPT_MAN_PIECES VARCHAR2 (5).
  C11_SHPT_MAN_WEIGHT VARCHAR2 (9).
  C12_SHPT_MAN_VOLUME VARCHAR2 (12)
  )
  EXTERNAL ORGANIZATION
  (
  TYPE ORACLE_LOADER
  Dat_dir default DIRECTORY
  ACCESS SETTINGS
  (
  RECORDS DELIMITED BY 0 x '0D0A '.
  CHARACTERSET "WE8ISO8859P1".
  STRING SIZES ARE IN CHARACTERS
  BADFILE "PARTIAL_SHPT_FIXED_NHF.dat_%a.bad."
  LOGFILE "PARTIAL_SHPT_FIXED_NHF.dat_%a.log".
  DISCARDFILE 'PARTIAL_SHPT_FIXED_NHF.dat_%a.dsc '.
  SKIP 0
  
  FIELDS
  MISSING FIELD VALUES ARE NULL
  (
  C1_RECORD_TYPE POSITION (:),
  C2_ISN POSITION (:),
  C3_AWB_UID POSITION (:),
  C4_FLIGHT_ID POSITION (:),
  C5_FLIGHT_DATE POSITION (:),
  C6_AIRCRAFT_FLOW_TYPE POSITION (:),
  C7_PORT_CODE POSITION (:),
  C8_SHPT_BD_PIECES POSITION (:),
  C9_SHPT_BD_WEIGHT POSITION (:),
  C10_SHPT_MAN_PIECES POSITION (:),
  C11_SHPT_MAN_WEIGHT POSITION (:),
  C12_SHPT_MAN_VOLUME POSITION (:)
  )
  )
  LOCATION ("PARTIAL_SHPT_FIXED_NHF.dat")
  )
  PARALLEL
  REJECT LIMIT UNLIMITED
  """
  
  # Create the statement
  mystmt = myCon.createStatement)
  
  # Run the trigger creation
  myStmt.execute (createTblCmd)
  
  myStmt.close)
  mystmt = None
  
  # Commit, just in case
  myCon.commit)
  
  1. How can I solve this problem?
  2. If my data file have no record separator and the field delimiter, how do I configure in sub ODI?
  
  Remarks:
  
  1. the format of file under the "files" is "fixed".
  
  
  Thank you very much!!
  
  Tao

  Tao,

  Your problem is not LKM(External Table). You will need to set the interface diagram. Select each column in the pane "DataStore target" of the "Diagram" tab when you open the interface.
  Mark "run" for each column to be on the "staging area".
  Currently, you have all the columns marked in 'Source '.

  This will fix the problem.

  Hope that helps.
  PS Don't forget to mark as good/useful solutions if you feel they were.

• How to fix file errors in Windows XP?

  I can't run disc defrag in XP because of "errors in file." How can I correct this file?

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the full and exact error message?

  Please answer these questions and tell us more about the issue, it could help us help you better.

  You can try the SFC scan currently running on the computer and check if that helps.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Reference:
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• How to fix file missing or damaged NTLDR in WINDOWS Vista Home Basic

  I tried to start windows from CD/DVD, but did not, so I tried to go in the Advanced Start menu options, but then also omitted to do. Please help how to repair these files. If we can repair it by command promt then mention.

  Hello

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - set the boot order
  for 1 CD/DVD so you can boot from a Windows disc. If you cannot boot from a Windows disc
  then the system has hardware problems and you need help from a real computer store (not
  leeks and glances at a Best Buy or other stores) or system manufacturer support.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How fix 'file' does not appear at the point of error on the site? Never had this problem now getting all the time! Why muse connects to my host? Nothing has changed on my end.

  Very annoyed by this "folder" does not seem the point of site error when publishing my sites. Here are the sites I "published" several times with the same login credentials. Now Muse gives me this error with my sites. Anyone know how why it's happening now and how to fix it?

  Muse should be able to create an FTP connection and an HTTP connection to your site in order to validate your sitemap.xml, confirm the support of PHP and confirm redirects htaccess are for synchronized text. If the 'URL of the Site' value is incorrect, Muse will be unable to find the site transferred via FTP to the site URL provided using HTTP.

• Impossible to uninstall the applications Manager - fix file host

  Try to uninstall all my adobe products (if I can do a clean reinstall). I ran all uninstall them with the creative cloud cleaning tool, but I can't seem to get rid of the Manager application files. The tool clean: "difficulty Host File.

  Hello

  If you are unable to uninstall the application using the cleaning tool, please try steps mentioned below-

  Reset the file hosts:

  Note: You may need disable you the security software to change your hosts file.

  Windows

  1. Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
  2. Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
  3. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
  4. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
  5. Save and close the file.

  Mac OS Log in as an administrator to change the hosts file in Mac OS.

  1. In a Finder window, choose go > go to folder.
  2. Type / etc.
  3. Select the hosts file and open it.
  4. Save the hosts file: choose file > save under, save the file as hosts.backup, and then click OK.
  5. Look for the hosts file for entries referencing activate.adobe.com (for example, 127.0.0.1 activate.adobe.com) and delete these entries.
  6. Save and close the file.

  After trying this rerun cleaning tool.

  Let us know if this will help!

  Kind regards

  Sandrine

• How to fix 'file already exists, code 6' cs5.03 win7 64 bit bluray please ".

  Hello

  in the last part of a 31 gb bluray h264 burn iso image

  still does more for 20 minutes (disappears from the Task Manager

  and performance monitor altogether) and then says "code 6 file already exists."

  the same error has occurred twice at the end of the construction

  I erased each time preferences

  any help is appreciated...

  Jeffrey

  CERTIFICATE is a file created by the record of generation. You seemed to say that you had a temporary folder of some sort.

  Burn exactly what still creates the disk.

  When you burn folders with image burn the disc resulting should be still

  navigation with buttons menu (designed in yet), correct?

  Yes, you can see the files in the window that shows what ImgBurn will burn MG and CERTIFICATE.

• How to fix a missing file

  Original title: missing file

  How to fix file missing 0 x 80070002

  Ralph

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  If the suggestion in the link fails to solve the problem after a copy of the error report in the event viewer.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.