[FIXED] Violation of the security sandbox in IE and Safari

Similar Questions

• Need help to understand the security sandbox problem after changing Web host

  I am trying to switch my Web host 1 & 1 shared hosting to an IP address with a small company that specializes in Drupal sites and doesn't know much about flash dedicated.

  1 & 1 is always the Registrar for my domain, but I 'tidied up' YourGods.com on holistic servers and "stressed" my site DomainNameServers holistic rather than servers 1 & 1.

  After doing this, my Flash site (which is based on the Gaia framework) has stopped working, and the Flashplayer debugger, gave me the following errors:

  Error: Cannot load the xmlsocket://127.0.0.1:5800 policy file

  Error: Request for resource at the xmlsocket://127.0.0.1:5800 by the http://www.yourgods.com/bin/main.swf applicant failed because the server is not reachable.

  Security Sandbox Violation

  Connection to 127.0.0.1:5800 broken - not allowed to http://www.yourgods.com/bin/main.swf

  Someone to help me on another thread thought 127.0.0.1:5800 could mean that the problem had to do with my ways and I tried to access something on my local computer, rather than being a matter of cross-domain standard where one server was attempting to access files on another server without report.

  If anyone can clarify this?

  I googled 127.0.0.1:5800 and found some stuff on the loops between a server and the original computer, but I don't really know how to put it all together.

  Is it possible (with the flash debugger or other software) to step through my code actionscript with periodic break points so I can understand which line is causing the problem?

  Or a way to find out if there is a problem between holistic and my local or holistic computer and the 1 & 1 servers?

  Thanks for any help.

  127.0.0.1 is your local development server. It seems that your application is trying to access this IP address and unable to. You need to look at the source and find where it accesses to this and replace it with the IP address.

• Cannot install the security updates two, KB2479628 and KB24855376

  Window 7 32 bit, Toshiba Satellite L350D, have 2 updates security who refuse to install, KB2479628 and KB24855376, have tried the search found no answer. No change on my computer, open use F - Secure viras check and firewall

  Hi rivercrouchman,

  Please let us know the error returned when you try to install the updates.

  Also, please see the article after some troubleshooting for your question:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Im confused about the security of my computer and its compatibility with my software anti spyware... StopZilla...

  My computer came with Norton Security.  I didn't like it so when it expired, I stop Zilla.  can I go ahead and remove the Norton program?  and StopZilla is compatible with the Windows defender and other security provided with the operating system.  Help... I am so tired renewal norton windows popping up all the time. Thanks for your help

  Hello

  To add the good advice of TG, you don't want two of the main antivirus on the computer products
  at the same time much less running. Don't forget to use the removal of the machine tools to prevent
  problem causing leftovers when you want to uninstall/remove an antivirus/security products.

  Norton - removal tool
  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Removal tools
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Here's what I use and recommend:

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I download CS5 and is 99% completed but is prompting the closure of the following applications: notification safaricloudhistory and safari. I have quit safari several times and cannot be found in preferences to close those apps! How can I fix?

  Have installed too many Yosemite... and always become familiar with Yosemite.

  Guest of installation of close SafariNotificati

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• What is the * 32 in the Task Manager, MSN, IE and Safari?

  Today, I noticed that next to MSN, Internet explorer, Safari... I have a * 32. He has never done this before. Let me correct the cause of the problem that he just started doing this today. My system is 64-bit. Is it possible that I could make my computer do not show * 32?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to read the security descriptors data stream

  Whenever I start my computer runs CHKDSK - it says checking file system on E: and then he said that it should be checked for consistency. It works until stage 3 when he says 'impossible to read the security descriptors data stream' how to fix this?

  I tried chkdsk e:/r and it runs before step 3 when I get the "unable to read the security descriptors data stream" and it goes no further.

  I also tried fsutil dirty query e:- but it says something about a parameter incorrect and not if the volume is dirty or clean.

  Then I tried chkdsk e:/f/x - that always gives me the same mistake about it being an incorrect setting.

  As far as I know there is absolutely nothing on E:, I didn't even know that there was an additional drive. Right now I have it turned off so that I can use my computer. It seems to work fine without it. I read an article that said that if I can't fix e: with chkdsk which I have to do a low-level format of the reader? What's my next step? And I can do without the XP disc?

  The syntax

  fsutil dirty query e:

  is correct (except, of course, you try to use from the Recovery Console, where the fsutil command is not available).  Are you logged on as a user with administrative rights when you use fsutil?

  Similarly, the switches /f and/x are not available for chkdsk in the Recovery Console.

  See Recovery Console controls.

  Click on desktop then right-click on E: drive icon and select Properties.  What is indicated for:

  • File system
  • Space used
  • Free space
  • Capacity

  Now double click the icon for E: are shown files?  If not, click Tools > Folder Options > view and select the radio button "Show hidden files and folders" and uncheck "Hide protected files (recommended) operating system.  Now that you see all the files?

  Everything you read 'low level of shaped' is nonsense.  Any modern PC drive cannot be low level formatted by end users.  You can read this, but there is really no necessary even to "zero fill" your drive E: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=203931 (I have not checked to see if the WD tools rescuer has similar characteristics to SeaTools for DOS).

  If you are convinced that there is nothing of value on E (for example, installation of backup or restore), you can either format by right-clicking on the drive icon in my computer and selecting "format" or you can start disk management as described previously and use either in electronic format or delete the partition completely.  If you delete the partition, space becomes "unallocated".

  Because I guess C is your system drive (where Windows is), you may be able to use the diskpart tool to extend the partition F to use the unallocated space left if you decide to remove E well it's much easier (and safer) to do with disk management third-party tools such as Easeus Partition Manager free : http://www.partition-tool.com/personal.htm

• Security sandbox error

  How to avoid the security sandbox error
  
  I try to read the data of another site Web that is not my own
  
  I got this error:
  
  securityError no controlado: text = Error #2048: the Sandbox security breach: SMSinfo.swf cannot read http://jack.xtremdesign.net/SMSInfo/config.xml. " src="/webforums/forum/images/i/expressions/face-icon-small-confused.gif "border = '0' >

  The crossdomain file should go on the server serving the data whether you are difficult to access, not on your server.

  If this is not possible, then you must make this call from a server, instead of the Flex client. This is called using a proxy, and no, you can't just set this property on the dataservice tag.

  Google search for some pre-built proxy code.

  Tracy

• How can I reset the security questions in case the reset option does not appear?

  Hello

  I am buying an app and asked me to check myself by answering security questions since its my first purchase using the current device.

  I forgot security responses, and I entered the link provided

  

  After visiting the site, I chose the change of the security option

  

  I learned on the internet that an option to reset your security questions is supposed to arrive in the box that appears, but I couldn't find any this option.

  

  I am asked to answer the security questions to change, and no reset option is.

  I would appreciate your help.

  If you are unable to remember your password, security issues, do not have access to your address of rescue or are unable to reset your password for any reason, your only option is to contact the Support of Apple ID, to speak to an operator you should explain that your problem is related to your Apple ID This way you can be attributed to the assistance, even if you do not have an AppleCare plan.

  You will need to be patient with the process and to be ready to prove without doubt that the account belongs to you. Do not expect access to be restored immediately and if you are not the owner of the Apple ID saved to the device the account will not be reset.

• Firefox4 didn't transfer my identity safe for logons. Is there a way to replace Firefox4 with an earlier version that allows the secure identity?

  I use the secure identity with Explorer, and I was able to use it with an earlier version of Firefox that I had downloaded.

  You can download the previous version at this url:

  http://www.Mozilla.com/en-us/Firefox/all-older.html

  Use Add and remove programs control panel to uninstall FF4. Then reinstall FF36.

• I need to know how to configure the security settings for my laptop secured with a wireless router & domestic printer on a network in an apt building

  I live in an apartment bldg & want to know if my phone is secured with a wireless router & domestic implementation of a network. I have a laptop HP under Win 7 pro, a desktop computer using XP, & a wireless Canon printer? I use Microsoft Security Essentials for security. Can you tell me the right settings to ensure the safety of my business? And if I use the 'Public' library in documents others may see them outside my home network?

  Hi Tere,

  You can see this Microsoft article to strengthen the security of your computer and your network.

   

  Make your network more secure

  http://Windows.Microsoft.com/en-in/Windows7/making-your-network-more-secure

   

  Personal information and files on your wireless network can sometimes be seen by people to pick up the signal from your network. This can lead to identity theft and other acts of violence. A network security key or password can help protect your network against this type of unauthorized access wireless. Refer to this article for more information:

  Set up a security key for a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-security-key-for-a-wireless-network

  Public folders are a convenient way to share files on your computer. You can share files in the public folders with other people using the same computer and with people using other computers on your network. Any file or folder you put in a folder Public is automatically shared with the people who have access to your public folders.

  Share files via public folders

  http://Windows.Microsoft.com/en-in/Windows7/share-files-using-the-public-folders

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• WSSE security Migration of 10g and 11g - &lt; property = wsseUsername &gt; to 11g

  Hi all
  
  I read on OTN but impossible to find a decent solution. We have a wsdl for peoplesoft that has security on it. In Jdeveloper 10g, we should go to the partnerlink, click Properties and set it as follows:
  
  < property name = "wsseUsername" > testUser < / property >
  < property name = "wssePassword" > welcome123 < / property >
  < property name = "wsseHeaders" > credentials < / property >
  
  
  Now, I tried the following:
  
  * Right click on the external reference service, then select "Configure WS-Policy"
  * On the Security tab, click Add, and then select "oracle/wss_username_token_client_policy.
  * Now, open the property inspector, and click the Add button under the "Binding properties" tab
  * Include the "oracle.webservices.auth.username" and "oracle.webservices.auth.password properties.
  
  But when I try to compile I get error: Error (18,59): line 18, column 59 >: XML-20129: (error) Namespace prefix "wsp" is used but not declared. Error (18,59): line 18, column 59 >: XML-20129: (error) Namespace prefix 'orawsp' is used but not declared.
  
  I need to set the properties in Jdev and be able to deploy. If someone has solved this help please here. I read articles on the blog but its more or less. I even tried not to configure the ws policies and adding the properties directly in the binding, but it did not work.
  
  Help, please
  
  Thank you
  K

  have you tried the policy I mentioned?

• How can I stop the error code "security sandbox Violation".

  SecurityError: Error #2060: security sandbox violation: ExternalInterface calling https://z.moatads.com/swf/MessageSenderV2.swf cannot access https://static.skypeassets.com/adserver/AdLoader.html?version=1.66.9.
  at flash.external::ExternalInterface$/_initJS()
  at flash.external::ExternalInterface$/call()
  at MessageSenderV2_fla::MainTimeline/frame1()

  [The update by the moderator topic title should be more descriptive. [Original topic title was: 'How to stop this error code?']

  Download this update.
  
  https://support.Microsoft.com/en-us/KB/3089023

• Hi im having a problem in the as3 sandbox security violation please help

  1 see this tutorial!

  http://www.thetechlabs.com/tutorials/XML/creating-a-weather-widget-with-XML-and-AS3/

  2 http://caspianseataxidrivers.centralbaku.com/

  It's my project

  when im test it in flash I have a flash work Hi see weather IT WORKS but when I put it on the server, it gives me error

  #2044 Error: Unhandled securityError:. text = Error #2048: security sandbox violation: http://caspianseataxidrivers.centralbaku.com/CSTD.swf Cannot load data from http://xoap.weather.com/weather/local/AJXX0001?cc= * & link = xoap & by = 1205344398 & key = 24e1d0074 9192bb2 & unit = m .

  to cstd_fla::MainTimeline/frame1()

  I use crossdomain.xml
  <? XML version = "1.0" encoding = "ISO-8859-1? >

  < cross-domain-policy >

  < allow-access-from domain = "caspianseataxidrivers.centralbaku.com" / > "

  < allow-access-from domain = "*. centralbaku.com" / >

  < allow-access-from domain = "xoap.weather.com" / > "

  " < allow-access-from domain =" http://XOAP.weather.com "/ > "

  < / cross-domain-policy >
  but it not WORK ANY IDEAS?
  Plese help

  Hello

  Looks like you are trying to access data from a domain (xoap.weather.com) to distance to a source (www.centralbaku.com) domain where your swf file, but you have the cross-domain policy file resides in the area of the source instead of having to your remote domain.

  that is when a client hosts content from a particular source domain and that the content makes requests directed to other his, the remote domain would need to host a cross-domain policy file that grants access to the domain of the source, which allows the customer to continue with the transaction.

  If this wont work until you get an appropriate cross domain attached to your domain (xoap.weather.com) remote

  There are other means such as the use of proxy script that can run a while.

  Thank you!

  PS: pls mark this message as answered if it helps

• ' Error #2070: security sandbox violation: calling can not access the stage belonged to.'

  I tried the application deployment and I get this error.
  
  faultCode:Client.CouldNotDecode faultString:' error #2070: security sandbox violation: appellant cannot access the stadium belonged to.' faultDetail: 'null '.
  
  Exasperated after putzing autour with FlashPlayer Trust, cross-domain policy files, changing settings of the wrapper, changing the settings of the compiler and installing the debug version of Flash Player without success, I then installed Flex Builder on my friend and transferred machine source code to see if the problem goes away if I do a clean rebuild and compile it.
  
  And guess what! I still get the same error!
  
  Any tips will be appreciated.
  
  Happy new year!
  flexjv

  Duh!
  People of my fault.
  Discovered that a program that feeds on my Flex application generated invalid XML.
  The trap of fault Manager I had in my Flex application (which was based on an example of code Flex btw) generated the misleading warning.

  Moral of the story - instead of just showing the event.fault.message in your error handler, remember to precede a specific error message.

  Flex is a wonderful tool! Debugging in an env declarative, asynchronous as Flex requires a new debugging strategies well and unlearn some programming habits, though.