get and install the drive of the Extender

Similar Questions

• How to get and install the file txtsetup.oem for xp

  need to know how to get and install the txtsetup.oem file to install xp

  Hello

  The easiest way would be to visit the website of the manufacturer of the motherboard. This would normally have downloads for any RAID drivers required for the loading of Windows XP. The download can be an "executable" who writes a disk for you. It can be also something like a zip file with all files inside that must be extracted and copied to a floppy disk.

  If your PC is not a floppy drive, life becomes quite complicated.

  Please mark this as useful or response if applicable.

  Tricky

• Can I get a professional XP disk and install the OS individually on each computer (they have all their key codes), or do I have to find another way?

  I bought a bunch of desktop computers that came with XP Professional with IBM. I ordered the reinstallation disc, but it worked on one of my computers. Can I get a professional XP disk and install the OS on each individually (they have all their key codes), or do I have to find another way? I don't have the money to buy the recovery for each computer disk.
  IBM ThinkCentre

  Pentium 4 3.0ghz

  512 MB of ram

  hard drive 40 GB

  XP Professional

  As long as the disc you are using is the exact same OEM disc that would be provided by IBM that would work on these computers. It cannot be a copy in the Windows retail.

• Can I shrink a logical drive and not the extended partition to a bare metal restore to a smaller drive?

  The current configuration is a Dell T310 with a S300 controller, with all locations 4 hot filled with SAS drives.  The operating system is SBS 2008 (2008 Server/Vista), I intend to change the controller of S300 (software) controller, a controller (hardware) H700.  My concern is that the H700 brings readers a little smaller in size.

  The typical arrangement of Dell's diagnosis, followed by a recovery partition partition (E :), followed by the system partition (C :), followed by a partition with a logical volume (d).  If I use Diskpart to shrink the D: 'partition', he let me with free space, not allocated.  Thus, it effectively reduces the logical drive, and the extended partition stays the same size as it was, with no way to reduce it.

  The question is, if I shrink the logical D: drive and not the extended partition and then get backups of the system, I'll be able to a bare metal restore on the smallest virtual disk of the H700?

  That's what I did:
  -Released the S300 controller and 4, 450 GB, 15 000 rpm Cheetah RAID-5
  -Replace the controller H700 and 2, 2 TB 7200 RPM in RAID-1 Constellations

  Results:
  -Eliminates the possibility of falling on a disk space issue when restoring
  -Increased the amount of available disk space.
  M ' left with 2 free hard drive for future expansion bays.

• Impossible to download and install the latest versions to iCloud and iTunes. Whenever the download is finished, I get an error message and stops.

  Whenever I try to download and install the latest versions to iCloud and iTunes I get error messages.  Just like the download ends, I get an error message and the Apple installer stops the download. Then it shows that the new versions are available for download just aif I had never tried to do it in the first place.

  Try these direct links:

  • 12.3.2.35 iTunes for Windows (32 bit) (Windows 7 or later) - iTunesSetup.exe (2015-12-10)
  • 12.3.2.35 iTunes for Windows (64-bit) (Windows 7 or later) - iTunes6464Setup.exe (2015-12-10)
  • 12.3.2.35 iTunes for Windows (64-bit-for older video cards) (Windows 7 or later) - iTunes64Setup.exe (2015-12-10)
  • iCloud 5.1.0.34 for Windows (Windows 7 or later) - iCloudSetup.exe (2015-12-07)

  For more tips, see troubleshooting problems with iTunes for updates of Windows .

  TT2

• Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  WinXP Win7 upgrade options

  I had a HP machine with xp that has failed. Bought a full blown and installed on a new PC win7 os. I still have another machine hp with xp on it. Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  Product keys are not sold without installation media.

  Don't buy product keys for sites that sell just a product key - they are not authentic.

  You can buy Windows 7 Upgrade here (or at a local store):

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  There is no discount on a second license of Windows 7 If you already have a Windows 7 license.

  How to install Windows 7:

  When you have XP:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• How to repartition and format the extended partition and logical drives in Windows Vista?

  How to repartition and format the extended partition and logical drives in vista?

  Disk management...

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• says «Download and install the driver for memory card reader»

  Have a HP Compaq 2510p laptop with Window 7 Professional. In the center of the Action, it is said to download and install the driver for the memory card reader. When I do that, it says the following:

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Internet works and tried repeatedly, without success. There is also a vertical line on the screen of the computer that is still increasing so much width every day. Is this related?

  Thank you

  The vertical line is a strong indication that your screen is failing.  You will need a technician to replace it.  It will be not cheap.  Make sure that they install EXACTLY the good screen.

  Your computer is capable of displaying web pages?  If so, it is online and there is another problem that causes this download produce this message.

  Go to the HP support website and find your computer model.  Then find the driver, you need and download and save to your desktop.  Once you do this close the browser, and then double-click the update of the driver.

• Issue download and install the software driver for Windows 7.

  I use the HP Compaq dc7800 Small Form Factor and p/n AQ532US #ABA and Windows 7 Home Premium x 86 SP1, where can I find and download and install the driver software? I did check on hp.com but this isn't list full driver for Windows 7 Home Premium SP1 of x 86 software.

  any ideas?

  I appreciate it

  If you go on HP.com, driver and software downloads, the site is able to scan your computer and display all drivers available for your machine. What drivers are you looking for?

• Hello, I get the beginning of the muse of adobe are the error message that the adobe application manager is damaged or not installed now, I downloaded 2 times and installed the problem persists, however, can me someone here with a rat page

  Hello

  I get the beginning of the muse of adobe, the error that the application manager adobe is damaged or not installed

  Now, I downloaded 2 times and installed the problem remains, however

  can someone here with rat page

  Kindly try to remove Adobe Application Manager to help cleaning tool and remove CC help | Uninstall the creative desktop application Cloud can download and install Adobe Creative Cloud apps.

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  I get to level my windows in Windows 7 PC.  My old PC had CS6, Bridge, and Lightroom installed 5.7.  I want to remove all three of the old and install the new.  How do I do that?

  First of all make sure you disable / disconnect in order to save the number of activations.

  Click the help menu, and then select disable / disconnect .

  Then you can uninstall in Control Panel uninstall process as normal.

  Later, you can download and install CS 6 app link below:

  Download Creative Suite 6 applications

• Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Download from adobe.com or prodesigntools.com site.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"