WRT320n causes my modem to restart

Similar Questions

• 2016-004 security causing the finder update restart frequently?

  Yesterday I installed the 2016-004 security update on my iMac desktop. He seemed to have installed correctly but the finder now randomly restarts when I try to navigate/access of files. Sometimes, it crashes and the files don't load in the finder windows. If I restart the finder, manually, they will be available again, but the problem that happens all minutes of use. There do not appear to be updated later, and I don't know if it is possible to restore? I have a clone and a backup time machine, but I don't know how I would rollback of security update with time machine. I tried to restart but the problem still occurs. I tried updating to El Capitan months but had to restore the Yosemite system, because the system was apparently unable to manage treatment. I have the max 8 GB of ram installed. Any help would be greatly appreciated because it comes from my desktop and I need to restore the service as soon as possible.

  Hello, jusbajan!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with the Finder doesn't work don't properly on your iMac. I know how it is important to be able to use the Finder and make it work properly at all times. I suggest you to start the computer in safe mode to see if the problem that is happening there. Read this article here: try safe mode if your Mac does not start-up. Even if the Mac starts up properly, safe mode will eliminate startup problems that could cause problems like what you experience with the Finder.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  If you do not hear a startup chime after pressing the power button, see what to do if your Mac does not illuminate.

  If you use FileVault

  If your boot drive is encrypted with FileVault, you can always hold the SHIFT key immediately after switch on/off your Mac to boot into safe mode. You may be prompted to log in twice as part of this process - first to unlock the boot disk and a second time to log in the viewfinder. You can release the SHIFT key after seeing the first login screen.

  If these steps do not help, check and see if the problem occurs with a Test user by following this link: How to test a question in another account on your Mac user. The Test user will allow you to see if the problem is specific to the user or the system-wide.

  See you soon!

• My Shockwave Flash for Firefox (and IE) plugin causes computer/browser crash & restart, but only for the worms. 10.2 +. 10.1 & below, no problem. Any difficulty?

  I had this persistent problem of Shockwave Flash crash my system and causing an automatic my PC restart, as soon as I try to play flash videos (any browser, in fact). However, as long as I keep my flash to version 10.1 and not update it, it works fine. The problem is how long can I keep it like that until some future tweak of the same general Web site if flash sites that prevent work?

  I want to know if there is a fix so that I can install future versions of the Shockwave Flash plugin and actually make it work so I don't have to use such an archaic version of the Flash more (gag, even if I say this, I again Flash, it's so awkward in any version, I wish websites would turn to some other standard videos already).

  If anyone has an answer, please let me know. (My computer works on Windows XP with Firefox 12, either said by the way. Oh and I would love it if there was a way to get Firefox to work on the iPad, Safari is such a crude, childish browser, it has almost no Add-ons useful or features custom at all.)

  I just noticed that, in the subject line of your message, you specify the ActiveX of Flash for IE version causes the same problem. I wonder if there could be a problem with your graphics card driver software. Have you checked the firmware updates?

• WiFi connect to my router causes my development to restart

  Hello

  I'm having a problem with my prosper since that my router is down

  At the start he's trying to connect to my network, connecting its account, it restarts and keeps cycling like that until I turn off Wifi or forget the connection

  Initially, I had no problem happens only after the crashed\lost router connection.

  If I do a factory reset I can join the network and everything seems to work again.

  When I try another network (office) it seems to work

  Any idea whats causing this and how to fix it

  Thank you
  Ulrictar

  > If I do a factory reset I can join the network and everything seems to work again.
  So, what exactly is the problem? This problem was solved by adjustment of the Android OS to factory settings maybe something was wrong with the settings or the Wifi configuration. Would recommend to monitor or to this configuration once more.

• Using the usb port causes my computer to restart

  When I plug anything into a USB my computer to restart trys, it does not restart correctly until I have remove the item from the usb port.  I have a printer plugged into a USB at the back of the computer and that works fine, but if I try something else in the same port, even just a stick of memory, he knocked out the computer!  Any help appreciated.

  Hello kaydee16,

  I would say confirming that you are up-to-date with the latest firmware, drivers, and updates to the BIOS of your manufacturers Web site.

  How long have you encountered this problem?

  Did you of recent changes made to your system, before having this problem?  (installation/uninstallation software/hardware)

  What version of Windows XP and SP are you currently using?

  What anti-virus software are you currently running and when you ran a full scan last?

  Please let us know status.

  Thank you

  James

• April security updates Windows Vista caused laptop does not restart!

  Update security for Windows Vista (KB3045685)
  Update security for Windows Vista (KB3045999)
  Update security for Windows Vista (KB3046306)
  Update security for Windows Vista (KB3046482)

  Message box, something went from an unusual way to term in the registry.

  He had no numbers...

  1 Windows auto updater installed 10 updated important. On reboot,.

  my Toshiba laptop wouldn't start to ANY connection and is gone to the message box.

  I started in safe mode and did a system restored.

  2 tried to reinstall but only with the updates listed above, 4 KB not the 10.

  SAME message. Again once restore safe mode.

  Anyone know who the 4 updates do not use?

  I also stopped the automatic update.

  Any solution? I would like to take back with updates.

  I have not tried the 4 update above 1 both because the recovery mode is

  a lot of time and frustrating. Microsoft should have some answers...

  Hello

  Thanks for the post.

  Disconnect any attached external devices.

  If you use a third-party antivirus disable and then install updates and check.

  Temporarily turn off the firewall and antivirus software and try to install the updates.
  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-Vista

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  If this does not help, then I suggest you to put the computer in a clean boot state and then install. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

  Try this and let us know the results.

• New E4200 Causes cable Modem reset continuous

  I just bought this router, all comments have been very good.  I hung it on a cable Modem Motorola of Comcast, after three to five hours the router forces the cable modem resets automatically.  If I disconnect the router and connect directly to the PC or my old linksys modem router behaves correctly.  I returned the first unit that I bought at the store, at the direction of Linksys technical support, second unit so I exchanged the premiera has the same problem.  Very frustrating, don't know what to do next other than to return for a refund.  I was looking forward for maximum performance.

  I reported the issue to technical support, so far, they have me do a hard reset of the router, but that has not solved the problem.  I was wondering if anyone else has this problem or knows how I can solve this problem.

  I wish some better attention from technical support, do not know if it is a firmware issue or what.

  Aloha!  I recently bought an E3000 router to replace the old WRT54G Router and had the similar problem.  He kept my modem cable to reboot/reset after 6-12 hours.   I replaced the modem cable 2 weeks ago and had to reboot/reset once.

• After update, Setup does not take place and causes the computer to restart. This process is ongoing.

  Update Vista was wrong somehow. Update restarted the computer. Very slowly, I get to "configuration of the part 3 of 3, 0% complete do not turn off computer" and shortly after the computer restarts and this process repeats continually. I don't know if the computer has been accidentally closed off the power while the update occurred. Any ideas how to fix. I tried logging in SafeMode w / no luck.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can try a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• "Your PC fell on a problem. Causing your PC to restart. "message came

  I'm aware of which is not a re-occuring issue however, I would like to know what caused the computer down & I don't know how to read the .dmp files. If I could get help that would be appreciated. Thank you.

  The DMP file link: http://sdrv.ms/1bpqtPE

  In addition, the minidump file points to the Alpham164.sys as a problem as possible:

  9F error checking, {4, 12 c, fffffa800ae6f5c0, fffff802927c7910}

  WARNING: Unable to verify timestamp for Alpham164.sys
  ERROR: Module load completed but symbols can be loaded for Alpham164.sys
  Failed to retrieve the thread context, Win32 error 0n30
  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  Alpham164.sys, dated July 23, 2007, seems to be a driver for a keyboard to play, is perhaps not fully compatible with Windows 8.

  Try to update the driver, or, if necessary, uninstall the driver, or use a keyboard and a driver that is known to be compatible with Windows 8.

• Printing on HP Deskjet 3520 Causes Windows 7 to restart

  I have a HP Deskjet 3520 (bought in July 2012) which is connected to my Dell laptop via the USB port.  The computer Dell laptop, which was bought in July 2012, runs the Windows 7 64-bit operating system.  It works fine when it is not connected to the printer.  However, when I print my documents, occasional operating system crashes (reboot) occur.  What are the possible causes of accidents?  What are the possible solutions?

  Hello

  If the printer connected to a USB 3.0 PC?

  À, discoonnect make sure that the cable and connect it to any USB 2.0 port, as the product HP do not support the USB3 and such a link can cause this King of the behavior.

  It will be useful,

  Shlomi

• Forwarding a message in my EAS account causes my Centro to restart

  I just got my Centro Friday and today is the first time I tried to send a message to my e-mail (EAS) Office to someone else in my office.  Whenever I have try the phone restarts.  I tried with another message on the chance that it was the message and not the device/setup, but not joy.  I can, however, to an external POP account from the account of service Regional.

  Just solved this contact me - the I tried to send to Contacts has been reproduced.  Once I removed one of the entries, transfer worked.

  Message relates to: Centro (Sprint)

• Upgrade to 4.1 VMware tools 8.3.2 cause the print spooler restart

  I just wanted to see if anyone else has had this problem.

  After having modernized our guests from 4.0u2 to 4.1, I improved the tools on my virtual machines.  The next day on the virtual machines Citrix PS4.5 users had tons of printing problems.  These servers also had poor performance and restarted thoughout the day because the constant spooler restarts chess CPP triggered.

  The solution was to remove the tools from these hosts and re - 8.3.2 vmware install tools 4.0u2 (4.0.0 build 261974).  All other virtual machines seem to be fine with the new tools of 4.1.   (I also tried to remove just the fine print of the 8.3.2 driver tools without success)

  I report to VMware Monday and post what they say.  I just wanted to see if someone of another running Citrix or Terminal Server VM has the same issues.

  Thank you.

  We had similar problems of VERRRY as you did and resolved in this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1026851

  We had to enable VT - x / AMD - v option in the bios AND active the option "use Intel VT-X/AMD-V for the instruction set virtualization and Intel EPT/AMD RVI for MMU virtualization for our VM

  We had problems with Server 2003 Enterprise with 8 GB of RAM (so using the/3 GB switch in the boot.ini file) our Exchange 2003 server.

  This machine works now head and shoulders all the rest - we're still testing the rest of our virtual machines to ensure they remain stable after changing the CPU/MMU virtualization settings.  So far so good!

  I really hope that helps you!  14 hours STRAIGHT was devoted to this, including yelling, throwing objects, cursing vmware etc...

• VMotion causes some guests to restart

  Hello.

  I've been struggling with this problem for a while now.

  When the I VMotion one guest from one ESX Server to another there are some guests that restarts when the vmotion process gets to about 94-95%.

  Apparently not what ESX box it's destination or from matter.

  The only common element with these guests, it's that they were imported to physical machines.

  Has anyone seen elsewhere a question like that?

  Jason

  Hello

  Using VM control?  There is a problem with VM restart after an event of vmotion because of tracking heart rate have misread.

  Jon

• Satellite A110-275 restarts after a stop on the current

  Hello

  After installing xp sp3 if I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  If I turn off the external power (or pull the power cable on) if the machine is running on its battery - then stop - everything works fine. I have checked the event logs and see no error which would cause a reboot on shutdown. I disabled the reboot on system error switch and I turned off the wake of the bios on the options.

  I also looked in Device Manager and off anything that could wake the machine after his stop (only found the modem). I am at a loss - I don't see why external power would cause the works to restart but battery very well. Finally its possible this safe mode can also not working after installed sp3.

  If anyone has any ideas - I'd appreciate really them. It looks like there may be a newer bios available (I'm on V1.2) but I've seen a few posts cautioned against an updated bios windows at level - once again any info - very very welcome.

  System information:
  Toshiba Satellite - A110-275
  Windows XP pro - sp3

  > After installing xp sp3 so I stop my laptop while on external power, it seems to stop and power off of the fine - then 5 seconds later, it restarts?

  Have you noticed this problem before installing SP3?

  Its strange noises that this occurs only when the laptop is connected to the power adapter

  I searched in the forum for similar issues and in many cases enabled Wake up on LAN would cause a reboot.
  I know, you have this disabled in BIOS, but you should also check the LAN card properties in Device Manager.
  You will find an Advanced tab can disable this option too!

  Satellite A110-275 belongs to the series of PSAB0E.
  There is a new BIOS for PSAB0E series.

  BIOS v2.0 is OS independent. Means that he s created for Win XP and other OS.
  V5.40 BIOS is only for Vista OS.

  If you are using Win XP, then you should take the independent BIOS of the OS!

  Here you can find details of the update to the BIOS:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

• Freezes and restarts on 2015 5K running El Capitan iMac and am ready to freak me out

  Hi guys,.

  If I posted my check and reports being panic, could someone tell me what caused random freezes and restarts on my iMac 5 K - ish, El Capitan running? I am a designer/Retoucher and I am in the middle of a big job, of course.

  He went on and off for a few months. I have cleared my startup disk and played fresh OS installs (didn't even use Migration Assistant just to be safe), three times. I installed apps one at a time try to refine what is the cause but could not.

  At first I thought it was my mouse Logitech G502 because when I went to an old mouse for a few weeks the problem has disappeared. But yesterday, listening to iTunes via Airplay and working in InDesign, the system froze again.

  I wonder if she might be SoftRAID(4) and/or my two RAIDs of 4 external ThunderBay?

  Thanks in advance!

  Steve

  We can take a stab, please publish a report full of EtreCheck, and if we do not see everything that you can post your last report KP.