FL CS4: editing timeline for several layers

Similar Questions

• How to use the same mask, stencil, etc for several layers? Photoshop equivalent of the masked group?

  Hi I spent over half an hour for search manual, forums and the Internet and still can't find the answer. Help, please!

  For example, in a model with 5 or more layers, I want to use the same mask or stencil or what can hide layers 2,3 and 4 but areas layer 5 and all other possible layers below should not be affected.

  1. Before dialing the layers that you want to hide and apply a matte for the demo using the mask. Think to the Dial as an equivalent to the creation of a layer group.
  2. Use the effect on each layer you want to hide. It's easier to do if you apply mast set once and then create an animation preset to apply to the other layers. Just get mast set to do what you want it to do on the first layer, select Set Matte in ECW or in the timeline panel, and then go to the Animation > Save animation preset. Select then all other layers you want to apply the set matte to apply the preset.
  3. Put the mask at the bottom of the layers that you want to hide and turn on the switch to preserve transparency, then this group in composition with other layers of nesting.

  Here's another tip. You can set a custom color for all the layers you want to use the mast, then use the custom color for a group selection. This can make things easier down the line.

• A layer as a track matte for several layers

  I have a few animated texts. IM using a solid as track matte hides the text. Instead of precomping all my text or make multiple copies of the acting solid as a matte, I was wondering if its possible to add a phrase to my text layers say, indeed, serve this hides a layer by approach.

  Use for this purpose.

  http://Provideocoalition.com/RYoung/story/set_matte_a_32-bpc_matte_node

• Photoshop CC 14.1 path on several layers turned off editing?

  Editing paths on several layers with the direct Selection tool has been disabled in Photoshop CC 14.1? I can't seem to find a way to do it now, shift - or command-click does nothing. In fact, I can't even click on individual trajectories on different layers, something Photoshop has had forever.

  While it was sometimes problematic how he was at 14.0 (always by selecting multiple layers and go into isolation mode to edit a single), there were moments when it was useful to edit several layers, or even just a click between the layers with the direct Selection tool.

  I saw this documentation on the site, but I'm not sure it's very useful. Can someone give me a help?

  

  In addition, what is the keyboard shortcut customized to enter/exit isolation mode? It is mentioned in the image above, but what really?

  You can always work with the railways of the way in which you could in the 14 0 - simply choose the mode of all layers in the path Selection tool or the direct Selection tool options bar. We have added the layer mode active for users who prefer to isolate the paths may be selected based on which layers they have already selected in the layers panel.

  To clarify:

  -Mode of active layers: by clicking or dragging on the canvas with the selection of vector tools will not affect which layers are selected in the layers panel. Double click to go into isolation mode is disabled.

  -All modes of layers: works exactly as in 14, 0 - by clicking or dragging on the canvas with the selection of vector tools can change which layers are selected in the layers panel. Double click to go into isolation mode is enabled.

  If you are a lot of switching between these two modes, you can add a custom keyboard shortcut that is alternate which mode is selected. In the keyboard shortcuts dialog box, choose shortcuts for: tools and scroll down to the option Direct selection Mode Toggle. Add your new shortcut here.

  As for your question on the hotkeys for the isolation mode, it simply means that you can assign a hotkey customized for this command as well (select > isolate the layers).

• Can I extend several layers in the editing Photoshop CC 2015 Panel?

  I am creating a video using a PSD with more than 80 layers, I can choose several layers in the timeline panel, but when I try to drag to lengthen it just drag one of them all...

  Is that possible or I really need to drag one by one (cause it is REALLY bad)

  Hi Iskander1989

  The only way I remember just made one at a time.

  Also tried again here so yes need to drag one by one.

  ~ Jitendra

• Premiere Pro CC6 and CC7 will not video or still images to the timeline for editing.

  First Pro CC7 and nc6 don't add video or still images to the timeline for editing. It wil play the clip, but that's all.  I tried a lot of different vidoe, mov, avi files and others more, photo jpeg, but not matter what I do I can't move to the time line to edit. I have the 30 days trial version. I watched the tutorial, done the same thing, no luck.

  Ideas and help appreciated otherwise I'll just bin the whole program. I tried it on TOC Final 7 pro and there is no problem (it's on the mac, the first pro is on pc).

  Chances are that you want to create a sequence to put them.

  FAQ: How to choose the right sequence settings?

• Paste a shape as a mask when there are several layers?

  I have a couple of layers that I applied the auto vector command in order to hide. I want to now draw a rectangle rounded on part of my canvas, cut this rectangle with corners rounded and right-click on the drawing area and choose Edition > paste as mask, so the picture will be revealed due to the rounded rectangle shape. It works with a single layer, but now that I have several layers and masks vector auto I don't know which image/layer for click straight on and do with?

  Thanks for any help.

  Instead of cutting the rounded rectangle, leave it at the top of the stack of items, select all three objects, then select Modify > mask > Group as mask (or you can right click to select the group in the mask). This command will apply the object higher in the selection as a mask for the items below.

• Place MULTIPLE image import... and "Save as...". "several layers in multipage PDF

  Hello

  just a few suggestions, I would like to see to speed to the top of my game and exit...

  I would like to import several images placed in illustrator CS4. Place of dialog box open and select several images for placement.

  regarding the output record under...

  • We can output from multiple layers into a single PDF in illustrator?  Or several layers in single format JPEG from illustrator with a single command instead to save individually each layer... would be a huge timesaver for me. I create different works on different layers...
  • Currently I pulled out each layer individually filled then right-click on these JPEG output files in the output folder and choose "combine taken supported files in acrobat... "to create a unique acrobat... I would do things in Illustrator "save to PDF" dialog box. Add something in the Save to output PDF save layers to a single PDF as dialog box several pages would be a useful time saver...
  • I would also like to be able to CTRL click several layers and go ' Save as... '. "only these layers be saved on...

  Output of layers multiple to several files seems to be a step backward. I guess you used several layers because that Illustrator had no feature of multiple pages or multiple-work plan. It does now, your request is rendered null and void.

• Why are there several layers of folders 'Application Data'?

  Why does Windows 7 Professional x 64 creates structures of files like this:

  C:\Users\Settings\Application Data\Application Data\Application Data\Application Data\...

  and so on for several levels? For example, one of the user accounts on my computer has 6 six layers of Application Data files. And each Application Data folder is identical under folders, including a subfolder of Application data that leads to the next level of data Application, etc. etc.

  Is it normal for Windows 7, and if so, what does that mean? If not, is this a sign of a problem?

  Thank you for your understanding.

  I finally found my answer.

  Application data 'folder' keeps reproducing itself as a subfolder when you change the permissions for the Application data folder, usually giving you full permissions to the c:\users\ folder. It's exactly what I was doing.

  The Application Data folder is a crossroads, that points to the parent folder.

  C:\Users\\AppData\Local\Application Data\

  points to

  C:\Users\\AppData\Local\

  Spawning occurs when permissions for Application data 'folder' (junction) are changed. Application data must have the following permissions:

  Deny - all - list folder / read data - - this folder only

  Cela (wisely) to avoid recursion when a non Windows 7 aware application scans the Application data 'folder', and this is also the reason for the "Access denied" message you get on some folder in c:\users\. This leads some people, like me, to take complete control of the folder. I should know better.

• Management of several layers at the same point

  Hello

  I use the API in my application and Javacript Mapviewer, more than one layer can be established at the same point. I use MVThemeBasedFOI. If you click on this point, I want to give the possibly to choose which layer you want. Now when I have several layers, only the last can be clicked. Is there a way to solve it?

  MVThemeBasedFOI.setBringToTopOnMouseOver (boolean).   I found this method, but how do I access all layers when I click on a point?

  Thanks for help.

  ESC.

  I tried really hard things to fool this behavior. At the end of the search for new features that were not in the documentation, I found this: MVMapView.enableMultiThemeClickable (boolean). They should update the documentation because there are a lot of functions implemented that do not exist.

  Just enable it and it works perfectly!

  mapview.enableMultiThemeClickable (true);

  ESC

• How to config a cache shared for several environments with the C API

  How to config a cache shared for several environments with C API?  Like Java edition. Chapter 2. Database environments

  I want to open the large number of databases, at least 10,000. But as the counties of open databases increase, the db-> open become very slow operation. It took almost 2 hours for 10 000 databases.

  So I try to distribute these databases on multiple environments (for example, 5 envs). And to improve the efficiency of memory use, I want to share cache between ENVS.

  Hello

  We do not support the cache sharing between different environments as you mentioned.

  We have tested the case of the opening of 100 000 databases, see the number that you have encountered, we will check what is happening.

  Kind regards

  Winter, Oracle Berkeley DB

• How to make a link to send to my website for an elegant form fillable and electronic for several signing sessions and downloads from our Web site?

  How to make a link to send to my website for an elegant form fillable and electronic for several signing sessions and downloads from our Web site?

  Hi stacey1246,

  You can create an interactive PDF form & publish it on your website interactive Edition PDF web forms. Use the same to collect data of forms using Adobe Acrobat and form on the web.

  Kind regards
  Nicos

• Apply the filter at several layers at the same time (without converting them to a CG)

  Hey everybody,

  I looked everywhere for a way to simply apply the same filter with several layers at once, without first convert to smart object. I need to keep my layers intact and separated from the others. Does anyone know of a script or a way to do this?

  Any response is appreciated.

  -Andy

  Paul has a script "Filter selected Layers" on the site that makes the most of the filters.

  It's at the bottom of the "CSP Scripts" section.

  http://www.PS-Bridge-scripts.TalkTalk.NET/

• Inserting images before several layers

  Have a timeline with multiple layers of 5 (1-5) [A]

  Additional contiguous layers inserted before [A], 3 layers (1-3) [B].

  8 layers in total.

  I would like to add/insert frames for all layers in frame 1 so that B above them on the timeline.

  Select all the layers in A and by positioning the cursor/Ibeam (whichever it is) to the frame 1 and then selecting insert images does not work.

  Thank you!

  So, the answer to that is to select a block of images, not the layers, and then inserting images. First image was a key, so that had to be moved. Is there a function to specify the number/actual quantity of images to insert? (as a line/column of table in a word processor)?

• Need help to count the characters in several layers of text

  I use following code to count the number of characters and words in a single text layer. Is it possible to count the number of characters and words in a several layers of text. ?? Help, please

  Java Script code:

  //

  /*

  < javascriptresource >

  < name > Count words and characters < / name >

  < / javascriptresource >

  */

  function run()

  {

  var layer = activeDocument.activeLayer;

  If (layer.kind is LayerKind.TEXT)

  {

  Var words = layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  Alert ("\n" + countwords + "Words\n" + compteLettres + "Characters", "Count");

  }

  on the other

  {

  Alert ("select a layer of text.', 'Count');

  }

  }

  Run();

  2015, use it at your own risk.

  #target "photoshop - 70.032»

  If (app.documents.length > 0) {}

  var theTexts = main();

  alert (count (theTexts.join ("\n")));

  };

  ////////////////////////////////////

  int main() {}

  the file;

  myDocument var = app.activeDocument;

  get the number of layers;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

  var applicationDesc = executeActionGet (ref);

  var number = applicationDesc.getInteger (stringIDToTypeID ("numberOfLayers"));

  treat the layers;

  var theLayers = new Array;

  for (var m = 0; m<= thenumber;="" m++)="">

  try {}

  Var ref = new ActionReference();

  ref.putIndex (charIDToTypeID ("Lyr"), m);

  var layerDesc = executeActionGet (ref);

  var layerSet is typeIDToStringID (layerDesc.getEnumerationValue (stringIDToTypeID ("layerSection")));.

  isBackground var = layerDesc.getBoolean (stringIDToTypeID ('background'));

  otherwise the layer group.

  If (layerSet! = "layerSectionEnd" & layerSet! = "layerSectionStart" & isBackground! = true) {}

  theName var = layerDesc.getString (stringIDToTypeID ('name'));

  theID var = layerDesc.getInteger (stringIDToTypeID ('layerID'));

  var hasText = layerDesc.hasKey (stringIDToTypeID ("textKey"));

  If the layer type;

  If (hasText == true) {}

  var textDesc = layerDesc.getObjectValue (stringIDToTypeID ('textKey'));

  Letexte var = textDesc.getString (stringIDToTypeID ("textKey"));

  theLayers.push (theText)

  }

  }

  }

  catch (e) {};

  };

  return theLayers

  };

  Count characters.

  function count (theString) {}

  Var words = theString//layer.textItem.contents;

  Words = words.replace (/ (\r\n|\n|\r) "/ gm," "");

  ////////////////////////////////////

  Remove double spaces and space at the end;

  While (words.indexOf("")! = - 1) {words = words.replace ("","")};

  spaces var end = \s$/;

  Words = words.replace (spaces, "");

  ////////////////////////////////////

  var countwords = words.split("").length;

  var compteLettres is words.split("").join("") .length;.

  return ("\n" + countwords + 'Words\n' + compteLettres + 'Characters');

  };