Windows Update and microsoft update error? ox8024400a error ox80240036

Similar Questions

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• Windows Update error 646 for KB981432 and KB980469 on Vista 64 - bit O.S.

  I have Windows Update error 646 when trying to install KB981432 and KB980469 in my Vista 64 bit operating system computer.  This is the first time I've ever had a problem installing Windows updates.  Can you please help?

  Subsequently, in a Microsoft forum, I followed the directions to add the registry information in the book below (I copied & pasted the below for Notebook, "recorded under" register.bat on my desktop, then right click on it on my desk & "run as Administrator" and then tried to install, but it did not work):

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  Hi Rocketron,

  Sometimes patches seem to just have a hard time to proceed with the installation.  I have a fw for to look you at other things.  First of all, your Background Intelligent Transfer Services set to Automaticand started and Windows Update ? You can check these settings by typing services.msc in the search box of the start menu.

  Sometimes in order to get patches to install correctly, you must perform these tasks manually.

  (1) Download Center to visit Microsoft: http://www.microsoft.com/downloads/en/default.aspx.
  (2) search for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB979309).
  3) click on the link for the download and then click on download and run.  You must accept the agreement and then click on continue.
  (4) repeat this process for each download of updates Windows could not install.
  (5) to rerun the update from Microsoft, click find updates.  If all goes well, it will show that you are completely patched.

  If this does not work, try to run the Microsoft OneCare safety scanner.  Sometimes it will solve problems of hidden registry, or erase viruses can prevent the installation of patches: http://onecare.live.com/site/en-us/center/whatsnew.htm. Click full service scan, and then Quick scan (full scan takes a long time to complete). Try the patches.

  Good luck

  Barbara

• Windows Update, error 64 c and error 80070673

  Windows Update, error 64 c and 80070673?

  How to fix this error?

  Hello

  I suggest to follow the steps in the link below and check if it helps you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Windows-Update-error-80070673-64c-wont-install/7dedd4f0-1da7-4016-B0C0-1c1454df4e89

  Let us know the status of the issue.

• Windows Vista - Windows Defender error 0xc80000222 AND Windows Update, error 800800005

  I replaced the hard drive on my HP laptop and used the recovery disks to restore my computer to factory setting.  I also uninstalled Norton Anti Virus, download Mozilla Firefox and downloaded Avast Antivirus.  I tried to update, but got 2 two errors - Windows Defender error 0xc80000222 (the program cannot check the definition updates) and Windows Update error 800800005 (Windows could not search for new updates.).  I even tried to install Microsoft Fix to perform diagnostics, but it does not have (we're sorry, but Windows PowerShell could not run).  My system sign says that Windows is activated.  In the end, I want to use my upgrade for windows disk 8.  I used these discs before recovery without any problem.  Thank you.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Windows Update error code: 80072EFE - (firewall turned off, MS Fixit ran and still does not) any other suggestions

  Hello

  We had our computer offline since February and that you try to update windows (we're on vista). We get the error 80072EFE code after a long wait.
  I have been through the forums and tried the microsoft fixit and turn off our firewall. It's the things that we tried-http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80072efe-or-80072f76
  I need a few suggestions more...
  Thank you in advance. Kath.

  We had our computer offline since February and that you try to update windows (we're on vista). We get the error 80072EFE code after a long wait.

  I have been through the forums and tried the microsoft fixit and turn off our firewall. It's the things that we tried-http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80072efe-or-80072f76

  I need a few suggestions more...

  Even if you * know * you just did this - that in that order...

  Check your time zone and time are correct.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

• Can't insall Windows update error 80070570 and 800b0100

  Original title: update problem

  whenever I try to update the widows, I get the same error messages (80070570 and 800b0100).  Does this mean I have to upgrade to windows 7?

  Hello

  If it works well before? If so, remember to do recent changes on the computer before this problem?

  I would like to follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 2:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_update/

  Method 3:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  You can also follow the steps in the link:

  http://support.Microsoft.com/kb/822798

• 66A and 41 d on 2 important Windows Update error codes

  Original title: Windows Update error codes

  Get continually updated "stranded" with error code 66A and 41 d on 2 important Windows updates

  Hi MaxineDonald,

  1. the updates are getting failed with this error code?

  Step 1:

  I suggest you to reset the Windows Update components.

  Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically:

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also try to download the stand-alone package with updates and try to install.

  a. download updates from the Microsoft download Center:

  http://www.Microsoft.com/downloads/en/default.aspx

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

  Hope this information is useful.

• Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701

  Windows update error 8007007F said. When I tried to download whatever it is, including the "Fix it" or repair of Microsoft I have error-1073741701. I can't change my clock, I can't download anything.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error of certicifiate security and windows update error?

  I get the error of certicifiate security and windows update error?

  Hello

  1. What is the full error message?

  2. What is the error code that you receive Windows updates?

  3. who is the antivirus installed on the computer program?

  4. are you aware of changes to the computer before the show?

  Discover the history of update and update verification is the origin of the problem. Also, note the details of the error.

  Check out this link to do the same thing:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  For the security in Internet Explorer certificate error, you can perform the steps described in the article.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  See also:

  Certificate errors: FAQ
  http://Windows.Microsoft.com/en-in/Internet-Explorer/certificate-errors-FAQ#IE=IE-9
   
   
  Hope this information helps.

• Windows update: error code preventing me from to update and upgrade to Windows 10.

  Original title: error codes

  error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

  Hmm, take a look on...

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  Having problems connecting?

• Windows Update errors 80071 has 91 and 800F0922

  Hi all

  I get the same exact errors after doing a system restore. Anyone has any ideas on solutions? I have already run this utility from Windows Update as well.

  Thank you.

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-update-errors-80071a91-and-800f0922/b0080191-599e-4f9b-bf65-dc493c4092a6

  Hi Lam,

  1. You are not able to install updates?
  2. What anti-virus software is installed on the computer?
  3. Why do you want to do a system restore? Do you get A 80071, 91 and 800F0922 errors when you are restoring the system or Windows updates?

  To troubleshoot windows update problem designate as follows:

  Method 1:

  Disable all security, including windows Firewall software, then check if it solves the problem.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  You can try the steps from the following link and check if that helps.

  Problems with installing updates

  Method 2:

  I suggest that you run SFC (System File Checker) scan on the system and check if it helps.

  SFC scan will scan system files corrupted on your computer.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows.
  http://support.Microsoft.com/kb/929833

  Just reply to the State of the question.

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• Windows update error 646 for update of security on microsoft works 9

  Windows update error 646 for update of security on microsoft works 9

  See:

  http://support.Microsoft.com/kb/2258121

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Windows update error 80072EFD

  Hello
  I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
  I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.

  I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.

  I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:

  Validation code: 0
  LegitCheckControl: N/a, hr = 0 x 80070002
  signed: n/a, hr = 0 x 80070002

  My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.

  I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.

  It seems funny how the same thing happens even after a clean drive toshiba recovery.

  Any suggestions?
  BL262000

  Hello

  If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
  It's typical Microsoft problem and the solution must be sought by Microsoft.
  Have you checked
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f?